Sharif Digital Repository

This paper presents a robust and low-power single-ended robust 11T near-threshold SRAM cell in 10-nm FinFET technology. The proposed cell eliminates write disturbance and enhances write performance by disconnecting the path between cross-coupled inverters during the write operation. FinFETs suffer from width quantization, and SRAM performance is highly dependent to transistors sizing. The proposed structure with minimum sized tri-gate FinFETs operates without failure under major process variations. In addition, read disturbance is reduced by isolating the storage nodes during the read operations. To reduce power consumption this cell uses only one bit-line for both read and write operations.... 

This paper presents a single-ended low-power 7T SRAM cell in FinFET technology. This cell enhances read performance by isolating the storage node from the read path. Moreover, disconnecting the feedback path of the cross-coupled inverters during the write operation enhances WSNM by nearly 7.7X in comparison with the conventional 8T SRAM cell. By using only one bit-line, this cell reduces power consumption and PDP compared to the conventional 8T SRAM cell by 82% and 35%, respectively. © 2018 Elsevier GmbH  

This book present the lecture notes used in two courses that the late Professor Kasra Barkeshli had offered at Sharif University of Technology, namely, . The prerequisite for the sequence is vector calculus and electromagnetic fields and waves. Some familiarity with Green's functions and integral equations is desirable but not necessary.
The book provides a brief but concise introduction to classical topics in the field. It is divided into three parts including annexes. Part I covers principle of electromagnetic theory. The discussion starts with a review of the Maxwell's equations in differential and integral forms and basic boundary conditions. The solution of inhomogeneous wave... 

In this paper, seller-buyer supply chain coordination with general side-payment contracts is introduced to gain the maximum possible chain profit. In our model, the logistics costs for both buyer and seller are considered and the final demand is also supposed to be a decreasing function of the retail price. Since parties aim to maximize their individual profits, the contractual parameters are set in a way that these decisions become aligned with system optimal decisions. Therefore, a side payment contract is suggested in our model to assign the chain surplus profit to the chain members such that they have no intention to leave the coalition. Then, we change the contract into a quantity... 

Contaminant materials in lubricants are signs for prediction and measurement of wear in engines. Therefore oil monitoring is considered as one of the most effective techniques for maintaining the heavy equipments. However based on oil analysis data, the identification of engine problem is very hard due to different contribution factors. Hence, this paper is purposed to analyze the wear behavior of some sets of selected heavy equipment engine based on documented oil analysis data during two years in different conditions to track engine failures using trend analysis. Furthermore the selected equipments are divided into two major groups (plantation and forestry, and general construction) based... 

Oil analysis technique is used as predictive and proactive tools to identify the wear modes of rubbing parts and to diagnose the faults in machinery. In this paper, the wear behavior of diesel engines, especially on oil analysis, is studied based on condition data. In terms of analyzing historical data, descriptive statistics is used as data mining tools to find the relationship between condition factors of the machine and its final status. The equipments have been monitored in two different environments which are: plantation-forestry, and general construction. Based on this relationship a specific baseline is achieved for selected sets of equipment in their specific conditions. A striking... 

The proposed current harmonic model for high-power synchronous machines is dependent on the inductances of quadrature and direct axes. Variation of these parameters, as a consequence of modification in operating point, aging and temperature rise, in-progress pulse patterns, are no longer optimal solutions for minimization of harmonic losses. On the other hand, offline calculation of optimal pulse patterns for slight changes in these parameters, and storing them in read-only memories to serve as look-up tables, give rise to immoderate computational burden and unmanageable look-up tables. Notwithstanding performing online identification process and offline calculation of optimal pulse... 

This paper presents a powerful application of genetic algorithm (GA) for the minimization of the total harmonic current distortion (THCD) in high-power induction motors fed by voltage source inverters, based on an approximate harmonic model. That is, having defined a desired fundamental output voltage, optimal pulse patterns (switching angles) are determined to produce the fundamental output voltage while minimizing the THCD. The complete results for the two cases of three and five switching instants in the first quarter period of pulse width modulation (PWM) waveform are presented. Presence of harmonics in the stator excitation leads to a pulsing-torque component. Considering the fact that... 

Axial-torsional vibrations of rotating pretwisted thin-walled composite box beams exhibiting primary and secondary warping are investigated. Considering the nonlinear strain-displacement relations, the coupled nonlinear axial-torsional equations of motion are derived using Hamilton's principle. Ignoring the axial inertia term leads to differential equation of motion in terms of elastic torsion in the case of axially immovable beams. Centrifugal load in the presence of material anisotropy and pretwist angle leads to an induced static torque. The nonlinear equation should be linearized about the corresponding equilibrium state to obtain the linear differential equation of motion. Extended... 

In this study, a genetic algorithm optimization technique is applied, to minimize the total harmonic current distortion (THCD) in induction motors fed by high power inverters, based on an approximate model. That is, having defined a desired fundamental output voltage, optimal pulse patterns (switching angles) are determined to produce the fundamental output voltage while minimizing the THCD. The complete results for two cases of 3 and 5 switching instants in the first quarter period of PWM waveform are presented. In the sequel, considering that the torque pulsation is mainly affected by the presence of low-order harmonics, the fifth, seventh, 11th, and 13th order harmonics (in the case of 5... 

In this paper the aim is to minimize the total harmonic distortion (THD) in PWM inverters while suppressing chosen harmonics concurrently and maintaining the fundamental component of the output voltage at a required level. This is reformed as an optimization task and the optimal pulse patterns are accomplished using genetic algorithm (GA) optimization technique to minimize a predefined fitness function. The complete solutions that suppress the 5 th and 7 th harmonics and optimize the THD are given. A practical limitation on the determination of sequential switching angles has been considered as a set of constraints in derivation of the results. © 2006 IEEE  

This study presents a powerful application of genetic algorithm (GA) for the minimization of the total harmonic current distortion (THCD) in high-power induction motors fed by voltage source inverters, based on an approximate harmonic model. That is, optimal pulse patterns (switching angles) are determined to have the THCD minimized and the fundamental output voltage regulated concurrently. As the minimization of THCD corresponds to the minimization of harmonic copper losses of the motor windings, GA optimization technique has been utilized, in comparison with conventional optimization methods due to its capabilities of searching the entire solution space with more probability of finding the...