Loading...
Search for: sanati--kiana
0.108 seconds

    The Assessment of Joint's Rigidity Effect on the Nonlinear Dynamic Behaviour of Steel Frames with Semi-Rigid Connections

    , M.Sc. Thesis Sharif University of Technology Sanati, Kiana (Author) ; Mofid, Massoud (Supervisor)
    Abstract
    In this thesis project the effect of joint rigidity on the behavior of steel braced frames has been investigated. In order to carry out this study on the efficiency of semi-rigid connections, a series of 3-bay braced frames ranging from 6- to 20-story with extended end-plate and flush end-plate connections have been selected and designed. This study has been extended by evaluating the role of the mentioned connections on seismic performance of selected semi-rigid frames under seven famous earthquake records. Having taken a particular performance level, in this case, “life safety” the target displacement and also the lateral load pattern for each frame have been calculated. Then using a... 

    Comparing Performance of M.V, E.G.P and M.V.S Based on Genetic Algorithm in Iranian Capital Market

    , M.Sc. Thesis Sharif University of Technology Sanati, Ali (Author) ; Bahramgiri, Mohsen (Supervisor)
    Abstract
    The portfolio selection problem is always one of the most important problems of finance and investments due to its great implication and vital role in financial institutions. Many of researches in this area are based on the mean-variance model, originally proposed by Markoitz. In the last two decades, however, researchers and investors have attracted to some new models that import some new factors other than mean and variance in the portfolio decision problem, such as different risk measures, etc. In this research we compare performances of mean-variance, Elton-Gruber-Padberg (EGP) and mean-variance-skewness based on genetic algorithm in Tehran Stock Exchange. Moreover, in order to find the... 

    SH-wave Propagation in phononic Crystals of Periodic Nanostructures with Deformable Interfaces

    , M.Sc. Thesis Sharif University of Technology Sanati, Mahsa (Author) ; Mohammadi Shodja, Hossein (Supervisor)
    Abstract
    The aim of this study is to investigate the propagation of anti-plane shear waves in an elastic medium composed of periodic nanolayers (metamaterials) with deformable interfaces.Some of interesting properties of metamaterials are band-gaps and negative refraction angle.In nanolayered mediums the effect of interface becomes significant and classical continuum theory is not sufficient individualy. In this research by introducing 4 interface parameters and adding some equations to classical continuum theory, the possibilty of discontinuity of traction and displacement across the interface is provided and the effect of interface is considered. Then, a functional representing the energy of the... 

    Design and Fabrication of Advanced Electrode Materials Based on Metal-organic Frameworks and Double Layered Hydroxides Using Hollow Copper Hydroxide Nanotubes Scaffold; Application to Nonenzymatic Glucose Sensor

    , M.Sc. Thesis Sharif University of Technology Khaki Sanati, Elnaz (Author) ; Shahrokhian, Saeed (Supervisor)
    Abstract
    One of the remarkable subject in advanced electrochemistry is, design and architecting new advanced materials with new electrochemical capabilities. One of the notable capabilities is electrocatalysis. Extensive researches are carrying out into the design and preparation of electrocatalyst materials to take advantage of these materials in fabrication of electrochemical sensors and storage/conversion devices. In this field nonoporous materials attracted a lot of attentions due to their unique features. In order to make use of the nanoporous materials as the electrocatalysts, these materials must be fabricated into continuous supported thin films on the electrode surface, which is the... 

    Advanced on-site glucose sensing platform based on a new architecture of free-standing hollow Cu(OH)2 nanotubes decorated with CoNi-LDH nanosheets on graphite screen-printed electrode

    , Article Nanoscale ; Volume 11, Issue 26 , 2019 , Pages 12655-12671 ; 20403364 (ISSN) Shahrokhian, S ; Khaki Sanati, E ; Hosseini, H ; Sharif University of Technology
    Royal Society of Chemistry  2019
    Abstract
    The planned design of nanocomposites combined with manageable production processes, which can offer controllability over the nanomaterial structure, promises the practical applications of functional nanomaterials. Hollow core-shell nanostructure architectures represent an emerging category of advanced functional nanomaterials, whose benefits derived from their notable properties may be hampered by complicated construction processes, especially in the sensing domain. In this regard, we designed a highly porous three-dimensional array of hierarchical hetero Cu(OH)2@CoNi-LDH core-shell nanotubes via a quick, very simple, green, and highly controllable three-step in situ method; they were... 

    Direct growth of metal-organic frameworks thin film arrays on glassy carbon electrode based on rapid conversion step mediated by copper clusters and hydroxide nanotubes for fabrication of a high performance non-enzymatic glucose sensing platform

    , Article Biosensors and Bioelectronics ; Volume 112 , 2018 , Pages 100-107 ; 09565663 (ISSN) Shahrokhian, S ; Khaki Sanati, E ; Hosseini, H ; Sharif University of Technology
    Elsevier Ltd  2018
    Abstract
    The direct growth of self-supported metal-organic frameworks (MOFs) thin film can be considered as an effective strategy for fabrication of the advanced modified electrodes in sensors and biosensor applications. However, most of the fabricated MOFs-based sensors suffer from some drawbacks such as time consuming for synthesis of MOF and electrode making, need of a binder or an additive layer, need of expensive equipment and use of hazardous solvents. Here, a novel free-standing MOFs-based modified electrode was fabricated by the rapid direct growth of MOFs on the surface of the glassy carbon electrode (GCE). In this method, direct growth of MOFs was occurred by the formation of vertically... 

    Band-structure calculation of SH-waves in 1D hypersonic nano-sized phononic crystals with deformable interfaces

    , Article Mechanics of Materials ; Volume 171 , 2022 ; 01676636 (ISSN) Jam, M.T ; Shodja, H. M ; Sanati, M ; Sharif University of Technology
    Elsevier B.V  2022
    Abstract
    Nanoscopic interface deformations between the layers in a superlattice have a great impact on its phononic band-structure. This work aims to study the SH-wave band-structure in one-dimensional (1D) multilayer hypersonic nano-sized phononic crystals with consideration of local deformations at the interfaces of the layers. At this scale, the traditional theory of elasticity is unable to capture the realistic forbidden and permitted frequencies. Thus, in light of surface/interface elastodynamics theory for nanostructures with deformable interfaces, a mixed variational method which accounts for the notion of interface elasticity, deformability, and inertia is introduced in the present work. For... 

    Analysis of near well-bore behavior of gas condensate reservoir in production stage

    , Article Petroleum Science and Technology ; Volume 30, Issue 24 , 2012 , Pages 2594-2603 ; 10916466 (ISSN) Allahyari, M ; Aminshahidy, B ; Sanati, A ; Taghikhani, V ; Sharif University of Technology
    2012
    Abstract
    The formation of condensate banking in the near well-bore region will lead to the reduction in gas relative permeability and loss of well deliverability. This loss is investigated by conducting a series of fine grid numerical compositional simulation with the gas condensate and dry gas reservoir data. Also, a method for calculation of condensate blockage skin factor is introduced in which the skin factor is calculated using dry gas and gas condensate simulation production data. The authors also found that absolute permeability and pressure drawdown of the producing well have significant influence on the well gas deliverability and condensate blockage skin factor  

    Incremental Dynamic Analysis in Regular Concrete Structures with Seismic Base Isolators

    , M.Sc. Thesis Sharif University of Technology Haji Reza Zadeh Sanati, Saeed (Author) ; khaloo, Alireza (Supervisor)
    Abstract
    Although the issue of separation is studied frequently in the last few decades, in presence of numerous parameters and unknown effects of earthquakes and soil condition, scientists confront with remarkable difficulties. It was supposed that performance of structures which are secluded from soil remains in the elastic region and doesn’t bear nonlinearity. But according to recent studies, scientist assert that nonlinear performance might be possible as a result of various soil condition and ingredients of earthquake(magnitude and frequency). General procedure for seismic improvements of structures includes increasing the strength and resistance, capability of structure to absorb energy and... 

    Design and Build of Small USVs by Capability of Swarm Control

    , M.Sc. Thesis Sharif University of Technology Sanati Baygi, Mohammad Reza (Author) ; Seif, Mohammad Saeed (Supervisor)
    Abstract
    This research addresses the design, simulation, and experimental implementation of small intelligent Unmanned Surface Vehicles (USVs) for swarm-based operation and autonomous navigation. The primary objective is to establish an experimental framework for validating swarm guidance algorithms and assessing how theoretical control strategies transfer to physical vessels. In the theoretical phase, a catamaran dynamic model was developed to represent planar motion (surge, sway and yaw). Using this model, a leader–follower coordination scheme—adopted here as a swarm control strategy—was formulated to describe interactions between a leader and its followers under a set of representative scenarios.... 

    Colorimetric assay for exon 7 SMN1/SMN2 single nucleotide polymorphism using gold nanoprobes

    , Article BioImpacts ; Volume 3, Issue 4 , 2013 , Pages 185-194 ; 22285652 (ISSN) Ahmadpour Yazdi, H ; Hormozi Nezhad, M. R ; Abadi, A ; Sanati, M. H ; Kazemi, B ; Sharif University of Technology
    2013
    Abstract
    Introduction: Proximal spinal muscular atrophy (SMA) is one of the most significant neurodegenerative diseases amongst the autosomal-recessive genetic disorders which is caused by the absence of protein survival of motor neuron (SMN). A critical nucleotide difference in SMN2 compared to SMN1 gene leads to an inefficient protein. Hence, homozygous lack of SMN1 provides a progressive disease. Due to the high prevalence, up to now, several molecular diagnostic methods have been used which most of them are lengthy, expensive, and laborious. Methods: In the present study, we exploited a gold nanoprobe-based method for semi-quantitative SMN1 gene dosage analysis compared to SMN2. The assay was... 

    Colourimetric-based method for the diagnosis of spinal muscular atrophy using gold nanoprobes

    , Article IET Nanobiotechnology ; Volume 9, Issue 1 , Feb , 2015 , Pages 5-10 ; 17518741 (ISSN) Ahmadpour Yazdi, H ; Hormozi Nezhad, M. R ; Abadi, A. R ; Sanati, M. H ; Kazemi, B ; Sharif University of Technology
    Institution of Engineering and Technology  2015
    Abstract
    Although numerous molecular methods for spinal muscular atrophy (SMA) detection have been exploited, most of hem are laborious, time consuming and costly. Recently, gold nanoparticles (AuNPs) have attracted attention in the field of colourimetric bioanalysis, because AuNP aggregation can be tracked with the naked eye as well as ultraviolet-visible (UV-vis) peak analysis. Here, based on a non-cross linking platform, a colourimetric-based method was used to evaluate the capability of thiolated oligo-AuNPs (Au nanoprobes) to distinguish between normal individuals, carriers and those with SMA. In this platform, removal of the repulsive force of the Au nanoprobes using high salt concentration... 

    Manufacturing of hydrogel biomaterials with controlled mechanical properties for tissue engineering applications

    , Article Acta Biomaterialia ; Volume 62 , 2017 , Pages 42-63 ; 17427061 (ISSN) Vedadghavami, A ; Minooei, F ; Mohammadi, M. H ; Khetani, S ; Rezaei Kolahchi, A ; Mashayekhan, S ; Sanati Nezhad, A ; Sharif University of Technology
    2017
    Abstract
    Hydrogels have been recognized as crucial biomaterials in the field of tissue engineering, regenerative medicine, and drug delivery applications due to their specific characteristics. These biomaterials benefit from retaining a large amount of water, effective mass transfer, similarity to natural tissues and the ability to form different shapes. However, having relatively poor mechanical properties is a limiting factor associated with hydrogel biomaterials. Controlling the biomechanical properties of hydrogels is of paramount importance. In this work, firstly, mechanical characteristics of hydrogels and methods employed for characterizing these properties are explored. Subsequently, the most... 

    Graphene oxide negatively regulates cell cycle in embryonic fibroblast cells

    , Article International Journal of Nanomedicine ; Volume 15 , 2020 , Pages 6201-6209 Hashemi, E ; Akhavan, O ; Shamsara, M ; Ansari Majd, S ; Sanati, M. H ; Daliri Joupari, M ; Farmany, A ; Sharif University of Technology
    Dove Medical Press Ltd  2020
    Abstract
    Background: Unique properties of graphene and its derivatives make them attractive in the field of nanomedicine. However, the mass application of graphene might lead to side effects, which has not been properly addressed in previous studies, especially with regard to its effect on the cell cycle. Methods: The effect of two concentrations (100 and 200 μg/mL) of nano-and microsized graphene oxide (nGO and mGO) on apoptosis, cell cycle, and ROS generation was studied. The effect of both sizes on viability and genotoxicity of the embryonic fibroblast cell cycle was evaluated. MTT and flow cytometry were applied to evaluate the effects of graphene oxide (GO) nanosheets on viability of cells.... 

    Microfluidic-based multi-organ platforms for drug discovery

    , Article Micromachines ; Volume 7, Issue 9 , 2016 ; 2072666X (ISSN) Rezaei Kolahchi, A ; Khadem Mohtaram, N ; Pezeshgi Modarres, H ; Mohammadi, M. H ; Geraili, A ; Jafari, P ; Akbari, M ; Sanati Nezhad, A ; Sharif University of Technology
    MDPI AG  2016
    Abstract
    Development of predictive multi-organ models before implementing costly clinical trials is central for screening the toxicity, efficacy, and side effects of new therapeutic agents. Despite significant efforts that have been recently made to develop biomimetic in vitro tissue models, the clinical application of such platforms is still far from reality. Recent advances in physiologically-based pharmacokinetic and pharmacodynamic (PBPK-PD) modeling, micro- and nanotechnology, and in silico modeling have enabled single- and multi-organ platforms for investigation of new chemical agents and tissue-tissue interactions. This review provides an overview of the principles of designing... 

    Skin diseases modeling using combined tissue engineering and microfluidic technologies

    , Article Advanced Healthcare Materials ; Volume 5, Issue 19 , 2016 , Pages 2459-2480 ; 21922640 (ISSN) Mohammadi, M. H ; Heidary Araghi, B ; Beydaghi, V ; Geraili, A ; Moradi, F ; Jafari, P ; Janmaleki, M ; Valente, K. P ; Akbari, M ; Sanati Nezhad, A ; Sharif University of Technology
    Wiley-VCH Verlag  2016
    Abstract
    In recent years, both tissue engineering and microfluidics have significantly contributed in engineering of in vitro skin substitutes to test the penetration of chemicals or to replace damaged skins. Organ-on-chip platforms have been recently inspired by the integration of microfluidics and biomaterials in order to develop physiologically relevant disease models. However, the application of organ-on-chip on the development of skin disease models is still limited and needs to be further developed. The impact of tissue engineering, biomaterials and microfluidic platforms on the development of skin grafts and biomimetic in vitro skin models is reviewed. The integration of tissue engineering and... 

    Impacts of graphene oxide contamination on a food web: threats to somatic and reproductive health of organisms

    , Article Ecotoxicology and Environmental Safety ; Volume 285 , 2024 ; 01476513 (ISSN) Hashemi, E ; Giesy, J. P ; Liang, Z ; Akhavan, O ; Tayefeh, A. R ; Joupari, M. D ; Sanati, M. H ; Shariati, P ; Shamsara, M ; Farmany, A ; Sharif University of Technology
    2024
    Abstract
    Contamination of aquatic food webs with nanomaterials poses a significant ecological and human health challenge. Ingestion of nanomaterials alongside food disrupts digestion and impairs physiological processes, with potential consequences for organism fitness and survival. Complex interactions between nanomaterials and biota further exacerbate the issue, influencing life-history strategies and ecosystem dynamics. Accumulation of nanomaterials within autotrophic and detritus-based food webs raises concerns about biomagnification, especially for top-level consumers and seafood-dependent human populations. Understanding the extent and impact of nanomaterial contamination on aquatic biota is... 

    Controlling differentiation of stem cells for developing personalized organ-on-chip platforms

    , Article Advanced Healthcare Materials ; Volume 7, Issue 2 , 2018 ; 21922640 (ISSN) Geraili, A ; Jafari, P ; Sheikh Hassani, M ; Heidary Araghi, B ; Mohammadi, M. H ; Ghafari, A. M ; Hassanpour Tamrin, S ; Pezeshgi Modarres, H ; Rezaei Kolahchi, A ; Ahadian, S ; Sanati Nezhad, A ; Sharif University of Technology
    Wiley-VCH Verlag  2018
    Abstract
    Organ-on-chip (OOC) platforms have attracted attentions of pharmaceutical companies as powerful tools for screening of existing drugs and development of new drug candidates. OOCs have primarily used human cell lines or primary cells to develop biomimetic tissue models. However, the ability of human stem cells in unlimited self-renewal and differentiation into multiple lineages has made them attractive for OOCs. The microfluidic technology has enabled precise control of stem cell differentiation using soluble factors, biophysical cues, and electromagnetic signals. This study discusses different tissue- and organ-on-chip platforms (i.e., skin, brain, blood–brain barrier, bone marrow, heart,...