Sharif Digital Repository

The complexity of the optimal phase control problem in wireless MIMO systems with scalar feedback quantization and equal-gain transmission is studied. The problem is shown to be NP-hard when the number of receive antennas grows linearly with the number of transmit antennas. For the case where the number of receive antennas is constant, the problem can be solved in polynomial time. An optimal algorithm is explicitly constructed. For practical purposes, a low-complexity algorithm based on local search is presented. Simulation results show that its performance is nearly optimal  

Dental resin composites are widely used as restorative materials due to their natural aesthetic and versatile properties. However, there has been limited research on the degradation mechanisms of these composites in gastric acid environments, which would be common in patients with gastroesophageal reflux. This study aims to investigate the degradation behavior of dental composites immersed in simulated oral environments, including acid, saliva, and water. Mechanical and morphological properties of the composites, upon immersion in the simulated environments, were thoroughly examined using hardness testing and SEM imaging. Qualitative analyses of the ions leached from the polymer matrix and... 

Mulitphysics processes have been commonly identified in geotechnical engineering practice. Researchers and field engineers often carry out multiphysics simulations to understand complex engineering responses. In field practice, a back analysis is typically required along with the simulations to calibrate the most representative model parameters. This would intensify the problem as it requires further simulations to assess the parameter sensitivity. Therefore, an efficient back analysis for multiphysics processes still remains a challenge in practice due to the numerical complexity and the low computational efficiency. With recent advances in AI techniques, opportunities have opened up for... 

Very recently, two-dimensional (2D) iodinene, a novel layered and buckled structure has been successfully fabricated (Qian et al 2020 Adv. Mater. 32 2004835). Motivated by this latest experimental accomplishment, for the first time we conduct density functional theory, first-principles calculations to explore the structural, electronic, and optical properties of monolayer, few-layer and bulk iodinene. Unlike the majority of monoelemental 2D lattices, iodinene is predicted to be an intrinsic semiconductor. On the basis of calculations using the generalized gradient approximation of Perdew-Burke-Ernzerhof for the exchange-correlation functional and the Heyd-Scuseria-Ernzerhof (HSE06)... 

Natural gas hydrate, a crystalline solid existing under high-pressure and low-temperature conditions, has been regarded as a potential alternative energy resource. It is globally widespread and occurs mainly inside the pores of deepwater sediments and sediments under permafrost area. Hydrate production via well depressurization is deemed well-suited to existing technology, in which the pore pressure is lowered, the natural gas hydrate is dissociated into water and gas, and the water and gas are produced from well. This method triggers multiphysics processes such as fluid flow, heat transfer, energy adsorption, chemical reaction and sediment deformation, all of which are dependent on the... 

Shallow landslides can be mitigated through the hydro-mechanical reinforcement provided by vegetation. Several critical parameters, such as plant spacing and plant age, play a significant role in influencing bioengineered slope stability facilitated by vegetation. However, the coupling of these effects on the stability of vegetated slope has been ignored. The objective of this study is to investigate the hydro-mechanical impact of vegetation growth and spacing on the stability of bioengineered slopes based on the predictions of a calibrated numerical model against field measurements. The impact of vegetation is investigated, with specific attention given to different plant spacing and growth... 

Perovskite solar cells have been constructed under the standard procedure by employing soluble tetratriphenylamine-substituted Zn phthalocyanine as hole transporting material. Solution processed device construction was carried out under ambient conditions of 50–60% ambient humidity. Triphenylamine substitution played the double role of imparting solubility to the core metal phthalocyanine as well as to introduce electron-rich ligands, which could enhance the role of Zn phthalocyanine as hole transporter. Indeed, the obtained material was functional. The present data highlight tetratriphenylamine-substituted Zn phthalocyanine as hole transporting material but also highlight the importance of... 

Deposition of asphaltenes upon precipitation is a main flow assurance concern, which propelled the development of various experimental and modeling techniques to accurately predict its occurrence. This work develops an integrated approach combining thermodynamic and deposition modules with a multiphase flow simulator to simultaneously model asphaltenes precipitation and deposition in wellbores. The Peng-Robinson equation of state and the modified Miller-Flory-Huggins theory are used to calculate the thermodynamic properties of the oil and asphaltenes precipitation, respectively. The deposition module is based on conservation laws for asphaltenes transport and is linked to the flow simulator... 

Asphaltenes, and their related issues, have been the focus of many literature investigations. However, in-depth analysis of asphaltenes structure and its relation to asphaltenes stability has been considered by fewer studies. In this research, extensive analysis of the structure of asphaltenes extracted from light, medium, and heavy oils is provided, together with analysis of three subfractions of the medium oil asphaltene having the least, intermediate, and highest solubilities. To this end, elemental analysis, EDX, mass spectroscopy, FTIR, NMR, XRD, and SEM results were collected. Higher hydrogen content and hydrogen/carbon atomic ratio, lower aromatic nature and olefinic entities were... 

Asphaltene deposition is a problematic challenge for oil production. Changes in key parameters like pressure and fluid composition during natural depletion and different gas injection scenarios may result in asphaltene precipitation and deposition. In this work, a model is developed by application of mass balance equations, momentum equation, asphaltene deposition and permeability reduction models. An algorithm is developed to perform iterative procedure to solve the numerical equations that contains highly coupled variables. Indeed, an equation is introduced to calculate the saturation of the precipitated asphaltene phase. Model parameters were determined by genetic algorithm which is a... 

Blind source separation (BSS) techniques have revealed to be promising approaches for the noninvasive extraction of fetal cardiac signals from maternal abdominal recordings. From previous studies, it is now believed that a carefully selected array of electrodes well-placed over the abdomen of a pregnant woman contains the required 'information' for BSS, to extract the complete fetal components. Based on this idea, previous works have involved array recording systems and sensor selection strategies based on the Mutual Information (MI) criterion. In this paper the previous works have been extended, by considering the 3-dimensional aspects of the cardiac electrical activity. The proposed method... 

The response of a structure-foundation system subjected to loading is a function of the interaction between them. If the response is to be analyzed accurately, the effect of roughness at the interface needs to be considered. This study is an investigation of the interface behavior of concrete (rock-like) specimens with four different surface roughnesses, experimentally and numerically. To provide roughness at the interface, an innovative three-dimensional (3D) printing technology was used to create roughness on the surface of concrete specimens. A series of uniaxial compression, interface normal compression, monotonic, and one-way cyclic shear tests was performed. The disturbed state concept... 

Thermal elongation of energy piles (EPs) depends on the end restraints to displacement. The EP head is restrained by a working load and non-energy piles (NEPs) within an energy pile group, depending on the cap rigidity. The existence of both EPs and NEPs in non-symmetrical thermally loaded energy pile groups imposes different restraints on EP heads, resulting in different pile elongations. This would induce load redistribution between the piles, thereby influencing the serviceability of energy pile groups in soft soil. In this paper, a 3-D numerical parametric study was conducted after back-analysing a centrifuge test on a floating elevated energy pile group subjected to cyclic... 

Land use regression (LUR) has not been applied thus far to ambient alkylbenzenes in highly polluted megacities. We advanced LUR models for benzene, toluene, ethylbenzene, p-xylene, m-xylene, o-xylene (BTEX), and total BTEX using measurement based estimates of annual means at 179 sites in Tehran megacity, Iran. Overall, 520 predictors were evaluated, such as The Weather Research and Forecasting Model meteorology predictions, emission inventory, and several new others. The final models with R2 values ranging from 0.64 for p-xylene to 0.70 for benzene were mainly driven by traffic-related variables but the proximity to sewage treatment plants was present in all models indicating a major local... 

In this study, water activities for the ternary systems of PEG6000 + sodium citrate (Na3Cit) + H2O and PEG6000 + potassium citrate (K3Cit) + H2O have been measured using an improved isopiestic method over the entire homogeneous mixing range at 298.15 K. From these measurements, values of the vapor pressure of solutions were also determined. The experimental data for the activity of water, collected in this work, were accurately correlated with local composition based models of the NRTL, modified NRTL, Wilson and modified Wilson. The results showed that these models can accurately correlate the water activity data generated in this work. © 2007 Elsevier B.V. All rights reserved  

In this work, a modified free-volume (FV) model based on the UNIQUAC-Nonrandom factor (UNIQUAC-NRF) model developed by Haghtalab and Asadollahi was proposed. While the combinatorial part of the proposed model for activity coefficient takes the same form as that of the entropic free-volume (entropic-FV) model, the residual part is similar to that of the UNIQUAC-NRF model. The proposed model, i.e., the FV-UNIQUAC-NRF model overcomes the main shortcoming of the original UNIQUAC-NRF model in predicting the lower critical solution temperature (LCST) for polymer solutions. The appearance of the LCST is believed to be attributed to the existence of the free volume differences between polymer and... 

Purpose: The aims of the present study were to examine electromyographic (EMG) activity of six bilateral trunk muscles during maximal contraction in three cardinal planes and to determine the direction of contraction that gives maximal activation for each muscle, both for healthy subjects and back-pain patients. Methods: Twenty-eight healthy subjects and 15 back-pain patients performed maximum voluntary contractions in three cardinal planes. Surface EMG signals were recorded from rectus abdominis, external oblique, internal oblique, latissimus dorsi, iliocostalis lumborum, and multifidus bilaterally. Root mean square values of the EMG data were calculated to quantify the amplitude of EMG... 

The main purpose of this work is to present a free-volume combinatorial term in predicting vapor-liquid equilibrium (VLE) and solid-liquid equilibrium (SLE) of polymer/solvent and light and heavy hydrocarbon/hydrocarbon mixtures. The proposed term is based on a modification of the original Freed Flory-Huggins model, replacing the molar volume with a free-volume (FV) term. Using an extensive database for athermal polymer solutions at finite dilution, the single parameter of the model has been well adjusted. The results obtained from the model proposed in this work were favorably compared with those obtained from the well-established entropic-FV based models, i.e., the original entropic-FV... 

The generalized quasi-chemical (GEM-QC) model proposed by Wang and Vera is modified to correlate better the phase equilibrium and to overcome the shortcoming of the original model to predict the lower critical solution temperature (LCST) of binary polymer solutions. This shortcoming is mainly because the GEM-QC model does not consider the effect of free-volume, which is important in systems containing molecules with large size differences. The proposed modification is based on replacing the combinatorial term of the GEM-QC model by a term proposed by Kontogerogis et al., which includes the effect of the free-volume. The main advantage of the free volume generalized quasi-chemical (GEM-QC-FV)...