Loading...
Search for: falamarzi--m
0.137 seconds

    Zeolitic imidazolate framework-derived Ag/C/ZnO for rapid reduction of organic pollutant

    , Article Journal of the Iranian Chemical Society ; Volume 16, Issue 5 , 2019 , Pages 1105-1111 ; 1735207X (ISSN) Falamarzi, M ; Akbarzadeh, E ; Gholami, M. R ; Sharif University of Technology
    Springer Verlag  2019
    Abstract
    One of the appealing usages of metal–organic frameworks is their application in manufacturing of metal oxide and metal oxide nanocomposites. In the present study, we used zeolitic imidazolate framework (ZIF-8) as precursor to prepare a new Ag/C/ZnO catalyst. The as-prepared samples were characterized using X-ray diffraction, Fourier-transform infrared, scanning electron microscopy and transmission electron microscopy analysis. Improved catalytic performance of as-prepared Ag/C/ZnO was confirmed by reduction of organic pollutants including p-nitrophenol, methylene blue and rhodamine-B in the presence of NaBH 4 in aqueous media. The synergistic effect between Ag and ZnO was proposed as the... 

    Design and analysis of the optical properties of modified 10-fold photonic quasi crystal fiber

    , Article Iranian Journal of Physics Research ; Volume 15, Issue 1 , 2015 , Pages 19-23 ; 16826957 (ISSN) Falamarzi, M ; Bahrampour, A ; Sharif University of Technology
    Isfahan University of Technology  2015
    Abstract
    In this paper, we have investigated the Penrose tiling photonic quasi crystal fiber with 10-fold symmetry. Due to low birefringence of this fiber, we have proposed two different asymmetric structure so as so obtain high birefringence and low beat length. By modifying radius of the air holes near core and changing the shape of air holes in cladding (from circle to elliptic), these new structures have been introduced. As a consequence, we have obtained a high birefringence of 710-3, confinement loss 102 dB/Km and a beat length of less than 210-3 mm  

    Investigation on Optical Properties of Photonic Quasi-Crystal Fiber

    , M.Sc. Thesis Sharif University of Technology Falamarzi, Mohsen (Author) ; Bahrampour, Alireza (Supervisor)
    Abstract
    Photonic quasi-crystals fibers as well as photonic crystal fibers have very interesting features, such as endlessly single mode, ultraflattened dispersion and high birefringence. Due to the wavelength dependence of their cladding and the ability to manipulate the air holes in the cladding can improve physical properties of fibers. Recently photonic quasi-crystal fibers have been studied due to interesting structure and observation of improved physical properties in them than the photonic crystal fibers and their applications in communication systems. In this thesis and in the first section, we have studied and reviewed the various optical properties of photonic quasi-crystal fiber with fold... 

    Thesis Title Synthesis and Characterization of Metal Nano Oxids and Investigation of their Catalytic Activity

    , M.Sc. Thesis Sharif University of Technology Falamarzi Askarani, Mehrdad (Author) ; Gholami, Mohammad Reza (Supervisor)
    Abstract
    In this project, the catalytic properties of CuO and ZnO were investigated in reduction reactions.MOFs were used as a precursor to preparation of these metal oxides. Gold and silver nanoparticles were used to improve the catalytic properties of the prepared metal oxides. Structural characteristics of nanocatalysts were stydied by SEM, TEM, XRD and FT-IR techniques. The prepared nanocomposites were applied in the catalytic reduction of paranitrophenol in the presence of sodium borohydride and the kinetics and mechanism were investigated according to the structure of the prepared catalysts  

    Optimization of Maintenance and Repair Planning for Gas Turbines in the Oil and Gas Industry

    , M.Sc. Thesis Sharif University of Technology Falamarzi, Amir Hossein (Author) ; Rafiee, Majid (Supervisor) ; Mostafavi, Mostafa (Supervisor)
    Abstract
    This research responds to the problem of how to optimize maintenance and repair planning for oil and gas industry gas turbines. With three questions driving the study—how to optimize maintenance planning, what are the drivers of its success, and what methodologies are currently available to be adopted—the research critically discusses existing methods and analytical procedures. The Nourabad case study in the Fars Province supports the empirical aspect through application of IPCMMS software data and historical performance records in five top-performing turbine subsystems. The core methodology integrates condition-based maintenance (CBM) concepts with a modified failure rate model from Rykov... 

    Probability of missed detection as a criterion for receiver placement in MIMO PCL

    , Article IEEE National Radar Conference - Proceedings, 7 May 2012 through 11 May 2012, Atlanta, GA ; 2012 , Pages 0924-0927 ; 10975659 (ISSN) ; 9781467306584 (ISBN) Majd, M. N ; Chitgarha, M. M ; Radmard, M ; Nayebi, M. M ; Sharif University of Technology
    IEEE  2012
    Abstract
    Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

    An efficient method for the ring opening of epoxides with aromatic amines by Sb(III) chloride under microwave irradiation

    , Article Journal of Chemical Research ; Issue 4 , 2008 , Pages 220-221 ; 03082342 (ISSN) Ghazanfari, D ; Hashemi, M. M ; Mottaghi, M. M ; Foroughi, M. M ; Sharif University of Technology
    2008
    Abstract
    SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

    Resource allocation for uav-enabled integrated sensing and communication (isac) via multi-objective optimization

    , Article ICASSP, IEEE International Conference on Acoustics, Speech and Signal Processing - Proceedings ; Volume 2023-June , 2023 ; 15206149 (ISSN); 978-172816327-7 (ISBN) Rezaei, O ; Naghsh, M. M ; Karbasi, M ; Nayebi, M. M ; Sharif University of Technology
    Institute of Electrical and Electronics Engineers Inc  2023
    Abstract
    In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit... 

    MIMO radar signal design to improve the MIMO ambiguity function via maximizing its peak

    , Article Signal Processing ; Volume 118 , 2016 , Pages 139-152 ; 01651684 (ISSN) Chitgarha, M. M ; Radmard, M ; Nazari Majd, M ; Karbasi, S. M ; Nayebi, M. M ; Sharif University of Technology
    Elsevier  2016
    Abstract
    One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

    Detection-localization tradeoff in MIMO radars

    , Article Radioengineering ; Volume 26, Issue 2 , 2017 , Pages 581-587 ; 12102512 (ISSN) Nazari Majd, M ; Radmard, M ; Chitgarha, M. M ; Bastani, M. H ; Nayebi, M. M ; Sharif University of Technology
    2017
    Abstract
    Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

    Antenna placement and power allocation optimization in MIMO detection

    , Article IEEE Transactions on Aerospace and Electronic Systems ; Vol. 50, Issue 2 , April , 2014 , pp. 1468-1478 Radmard, M ; Chitgarha, M. M ; Majd, M. N ; Nayebi, M. M ; Sharif University of Technology
    2014
    Abstract
    It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

    Ambiguity function of MIMO radar with widely separated antennas

    , Article Proceedings International Radar Symposium ; 16 -18 June , 2014 ; ISSN: 21555753 Radmard, M ; Chitgarha, M. M ; Nazari Majd, M ; Nayebi, M. M ; Sharif University of Technology
    2014
    Abstract
    There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

    Choosing the position of the receiver in a MISO passive radar system

    , Article European Microwave Week 2012: "Space for Microwaves", EuMW 2012, Conference Proceedings - 9th European Radar Conference, EuRAD 2012 ; 2012 , Pages 318-321 ; 9782874870293 (ISBN) Chitgarha, M. M ; Majd, M. N ; Radmard, M ; Nayebi, M. M ; Sharif University of Technology
    2012
    Abstract
    By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only... 

    Adaptive filtering techniques in passive radar

    , Article Proceedings International Radar Symposium, Dresden ; Volume 2 , June , 2013 , Pages 1067-1078 ; 21555753 (ISSN) ; 9783954042234 (ISBN) Chitgarha, M. M ; Radmard, M ; Majd, M. N ; Nayebi, M. M ; Sharif University of Technology
    2013
    Abstract
    One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared  

    Ambiguity function based receiver placement in multi-site radar

    , Article 2016 CIE International Conference on Radar, RADAR 2016, 10 October 2016 through 13 October 2016 ; 2017 ; 9781509048281 (ISBN) Radmard, M ; Chitgarha, M. M ; Nazari Majd, M ; Nayebi, M. M ; Sharif University of Technology
    2017
    Abstract
    It has been shown that using multiple antennas in a radar system improves the performance considerably, since multiple target echoes are received from different aspect angles of the target. In this way, the target detection is improved. However, when using multiple antennas, some problems, such as designing the transmit signals, synchronization, etc. emerge that should be solved. One of such problems is the receiver placement. Receiver placement deals with choosing a proper position for the receive antenna in order to optimize the whole system's performance. In this paper, a receiver placement procedure based on improving the radar ambiguity function is proposed for the case of a multisite... 

    Improving MIMO radar's performance through receivers' positioning

    , Article IET Signal Processing ; Volume 11, Issue 5 , 2017 , Pages 622-630 ; 17519675 (ISSN) Chitgarha, M. M ; Radmard, M ; Nazari Majd, M ; Nayebi, M. M ; Sharif University of Technology
    Institution of Engineering and Technology  2017
    Abstract
    By employing the MIMO (multiple-input-multiple-output) technology in radar, some new problems emerged, that, in order to benefit the MIMO gains in radar, it was necessary to solve them suitably. One of such obstacles is determining the positions of receive antennas in a MIMO radar system with widely separated antennas (WS MIMO radar), since it is shown that the antennas' positions affect the whole system's performance considerably. In this study, a proper receivers' positioning procedure is proposed. To do this end, four criteria are developed based on the proposed MIMO detector and the MIMO ambiguity function. The simulations verify that the proposed positioning procedure improves the... 

    Silylation of hydroxy groups with HMDS under microwave irradiation and solvent-free conditions

    , Article Phosphorus, Sulfur and Silicon and Related Elements ; Volume 177, Issue 2 , 2002 , Pages 289-292 ; 10426507 (ISSN) Mojtahedi, M. M ; Saidi, M. R ; Bolourtchian, M ; Heravi, M. M ; Sharif University of Technology
    2002
    Abstract
    Phenols and alcohols are silylated with hexamethyldisilazane (HMDS) under microwave irradiation in solvent-free condition in good to excellent yields  

    An intelligent solvent selection approach in carbon capturing process: a comparative study of machine learning multi-class classification models

    , Article Results in Engineering ; Volume 23 , 2024 ; 25901230 (ISSN) Pazuki, M. M ; Hosseinpour, M ; Salimi, M ; Boroushaki, M ; Amidpour, M ; Sharif University of Technology
    2024
    Abstract
    Carbon capture is crucial for mitigating climate change and achieving global emissions reduction targets. Among various technologies, absorption-based methods using aqueous solvents are among the most common and efficient, offering high capture rates and retrofit capabilities for existing industrial facilities. However, selecting the optimal solvent is challenging due to its direct impact on the performance, efficiency, and cost-effectiveness of the carbon capture process. This research introduces a novel multi-class classification methodology for solvent selection in carbon capture. Leveraging a dataset of 656 data points, including features such as temperature, pressure, molar ratio, and... 

    Agriculture for Sustainable Development to Empower Smallholder Farming Communities

    , Article Journal of Agricultural Sciences - Sri Lanka ; Volume 19, Issue 3 , 2024 , Pages 462-474 ; 13919318 (ISSN) Abdullah, R ; Najim, M. M. M ; Esham, M ; Sharif University of Technology
    2024
    Abstract
    Purpose: Intensive actions implemented to alleviate poverty created many challenges. Millions of people face acute food insecurity; hence, food production needs to be increased to feed the existing and increasing population through sustainable agricultural practices. Sustainable agricultural development is the only way forward to assist humanity. Research Method: TExisting literature on sustainable agriculture was reviewed, explored, understood, described, evaluated, and synthesized and their relationships to sustain smallholder farmers were analyzed. Findings: Technological innovations in increasing resource use efficiency, modern breeding techniques, and renewable energy sources aid in... 

    Dynamic analysis of carbon nanotubes under electrostatic actuation using modified couple stress theory

    , Article Acta Mechanica ; Vol. 225, Issue 6 , June , 2014 , pp. 1523-1535 ; Online ISSN: 1619-6937 Fakhrabadi, M. M. S ; Rastgoo, A ; Ahmadian, M. T ; Mashhadi, M. M ; Sharif University of Technology
    2014
    Abstract
    Modified couple stress theory is a size-dependent theorem capturing the micro/nanoscale effects influencing the mechanical behaviors of the micro- and nanostructures. In this paper, it is applied to investigate the nonlinear vibration of carbon nanotubes under step DC voltage. The vibration, natural frequencies and dynamic pull-in characteristics of the carbon nanotubes are studied in detail. Moreover, the effects of various boundary conditions and geometries are scrutinized on the dynamic characteristics. The results reveal that application of this theory leads to the higher values of the natural frequencies and dynamic pull-in voltages