Sharif Digital Repository

In recent years, 3D printing technology has found widespread applications in various industries such as aerospace, medical, and the production of complex parts. Among different 3D printing technologies, coaxial printing has been developed to overcome the limitations of single-material printing and enables the combination of multiple materials to create new properties that are a combination of the individual properties of the materials used. These advantages include the creation of conductive fibers, shock-absorbing structures, and hollow structures. Research indicates that the successful production of coaxial structures mainly depends on three key factors, the compatibility of core/shell... 

iN This thesis, Design and implementation of a low voltage, low power Delta-Sigma Modulator (DSM) is presented. System level considerations have been discussed thoroughly. In addition a systematic design flow in the context of continuous time delta sigma modulators is provided. While voltage-domain signal processing becomes more difficult in deep sub-micron processes, a finer time resolution is achievable. Time-domain quantizers can ameliorate the design challenges of flash quantizers which arises from lower supply voltages and higher fraction of comparator metastable region. VCO based quantizer such as voltage to frequency and voltage to phase considered as time domain quantizers can be a... 

Ethernet is among the most popular forms of data networking in the world. It has been widely used for local area networks and recently, it has also become very popular in metro area networks. As the usage of Ethernet grows, security and privacy of data transport using Ethernet becomes more important. As a result, there have been a lot of developments in improving security of Ethernet. In this thesis, we first provide a brief introduction of data security concepts. Then we briefly review important encryption standards. We focus on IEEE MACsec standard to provide the required security for Ethernet data transport. We have implemented the core encryption/decryption algorithms using HDL codes. We... 

WO3 have good electrochromic, gas sensor, photocatalyst, phoelectrochemical (PEC) properties. due its properties, tungsten oxide have many application in technology and industry. In this thesis, pure WO3 thin film and MWCNT-WO3 nanocomposite thin films with different weight percent of MWCNT/WO3 utilize for energy domain, particular hydrogen production with phoelectrochemical reactions spiliting water. For this purpose, initially WO3 thin films were deposited on glass and ITO substrates using sol-gel dip-coating method. Optical and surface properties of the films dried at 100ºC and annealed at 400 ºC had been investigated. UV-Visible spectrophotometer, atomic force microscopy (AFM), X-ray... 

World population growth, depletion of fossil fuels resources depletion and increased air pollution resulting from their consumption, human society has had to replace fossil fuels with renewable sources. In this context, the production of hydrogen using solar energy is feasible candidate to replace fossil fuels, which can be produced by water splitting in a photoelectrochemical (PEC) cell using an appropriate photocatalyst. This clean production method has been attended by many researchers in recent years. The most common photocatalyst for the conversion of sunlight to hydrogen by splitting water is Titanium dioxide (TiO2). But high energy gap and fast electron-hole recombination rate in TiO2... 

The low female labor force participation rate in the Iranian labor market relative to the global average and even to countries that do not differ significantly from the socio-economic characteristics of our country is one of the important questions of the Iranian labor market. In this study, we seek to answer the question of whether the economic participation rate of married women will increase if the gender gaps in wages, job findings and job losses among women and men are eliminated in the Iranian labor market. To answer this question using household expenditure and income data and labor force data, we show that between the two categories of occupations, in terms of the share of women's... 

Fatigue crack growth can have harmful effects on the reliability rotary machine. While an early warning to crack, can be used to extend the life of these expensive machines and increase reliability.Structural Vibration Condition Monitoring as a primary fault detection method, achieved to a lot amazing result and for this reason studies vibration behavior of cracked rotational shaft is a big issue for engineers of dynamic machine.In this research, first check the fault detection methods based on structural vibration condition monitoring, mode shape methods were extracted. Then by modeling rotational shaft in computer and creation of crack on it, fault detection quality of these methods have... 

It is important to provide an appropriate and economically method with technical and engineering considerations to stabilize excavated underground spaces. The necessity of this, especially for the construction of underground metro stations located in the cities which faces many problems, is more evident. In this research, it has been tried to introduce an optimal method according to the type of area for the construction of the underground station. In order to obtain stress and strain condition in structural elements and surface deformations due to different stages of excavating, numerical modeling in FLAC3D has been used. By examining the parameters that affect the sustainability of this... 

In the present study, the effects of increasing the value of shale gas production, either due to increased production or price increases, have been studied on economic variables such as employment, wage, property value and the number of births. In this regard, the data for each of these variables was used at the county level in the United States of America between 2000 and 2011. In order to estimate the desired effects, counties are divided into two types of boom and non-boom counties. The findings indicate that increasing natural gas production will lead to more employment and wage growth in boom counties than non-boom counties. Also, during the period of increasing production, the value of... 

Co-movement between inflation and nominal interest in response to an interest rate shock, dubbed neo-fisherianism, has been the subject of contentious debate since the advent of non-inflationary ZLB environment. We design an economic model rich with banking features to understand the economic responses to permanent and long-term interest rate shocks. We find that responses to a permanent positive interest rate shock depend on the monetary authorities’ speculation of the new long-term inflation rate, with the most probable outcome being a permanent increase in inflation. Responses to a long-term positive interest rate shock depict an increase and then decrease in inflation. We also discover... 

In this study, we aim to learn representations from microscopic cell images that effectively capture the features of drugs affecting the cells, allowing us to identify effective drugs for treating a disease. We employ two parallel learning paths using predictive and generative models. Specifically, we have achieved a predictive model on the RxRx19a dataset that, unlike previous models, is interpretable, optimized, and robust to dras- tic changes in drug properties. Additionally, we have developed the first generative model on this dataset, which not only generates high-quality images but also discovers a meaningful latent space. This latent space divides the representation into relevant... 

Influence of excavating the Tehran metro line 7 tunnel on surface settlement, stresses and deformations induced in Towhid tunnel is investigated using numerical modeling. Construction of Metro tunnel as the new one must be carried out without imposing any damage to the Towhid tunnel as the existing tunnel. Towhid tunnel is a set of twin tunnels along the Chamran highway in Tehran. The tunnels were constructed using sequential excavation method and lined with cast in place reinforced concrete; on the other side metro line 7 is being constructed using 2 EPB tunnel boring machines and lined with reinforced concrete segments. This research consists of the study of the effects of pillar width,... 

Foam injection for enhanced oil recovery is concerned by petroleum engineers because it decreases adverse effects of fingering and gravity segregation caused by the injected fluid .Obviously foam stability is an important factor in the efficiency of this process. So investigating it is an imperative. One of the ways that less studied and can improve foam stability is using of nanoparticles. In this project effect of nanoparticles on foam stability and displacement mechanism during foam flooding has been discussed.
Study consisted of two sets of experiments. In the first part, the static foam stability in the presence of silica nanoparticles has been investigated. Also influence of... 

Miscible displacement in fluid flowing through a porous medium plays an important role in many environmental and industrial applications; for instance, miscible displacements in enhanced oil recovery processes and pollutant spreading in groundwater. A large number of numerical approaches have been developed to solve the advection-dispersion equation that describes the behavior of miscible displacement in porous media. Most of these numerical models suffer from numerical dispersion. Random walk seems to be an effective method to overcome this problem especially in heterogeneous media. Here, a random walk model was developed and used for simulating miscible displacement in heterogeneous porous... 

Due to the increasing spread of metal industries and the need for raw material as feed for electric furnaces in order to produce cast iron and steel, as well as scrap deficiency and rising prices, the use of sponge iron as a substitute for scrap was considered in this project Therefore, in order to achieve the chemical analysis of the sorel ingot that is special for spherical graphite cast iron production with low manganese and chromium content, the direct reduction process was carried out using tunnel kiln method on low-manganese iron ore concentrate.After the investigation on direct reduction parameters including the saggers and coal grading,the produced sponge iron has melted in...