Sharif Digital Repository

Recent advancement in wireless communications, electronics, low power design and also tendency to use high performance low cost products have led to emergence of Wireless Sensor Networks (WSNs). As the main purpose of a WSN is information gathering and it’s transmission to the sink node, the main problem is to deliver information correctly with minimum energy consumption. Besides, whereas the majority of developed applications for WSNs are event-critical applications, achieving reliable data transfer as the main factor of dependability and quality of service seems vital. However, data transmission is unreliable over multi-hop WSN due to the unreliability of wireless links and node failures. ... 

During the operation of a nuclear power plant, the reactor pressure vessel (RPV) is exposed to a variety of pressure and thermal stresses and neutron radiations. This will cause the loss of the initial strength of the reactor vessel component. During the occurrence of some of accidents, an excessive cooling of the coolant inside the RPV takes place which in the term is called overcooling transients. In addition, in some of these events, a break in a section of the circuit will reduce the water level at the core of the reactor. By reducing the water level, the existing emergency makeup water systems are activated and inject water into the reactor. The temperature of the added water is much... 

Nowadays, video on demand causes a drastic increase in network traffic that it is expected that network traffic surpasses 45 exabytes per month until 2022; consequently, utilizing distributed memories known as caches across the network to alleviate the communication load during peak hours is inevitable. Coded caching is a promising approach to mitigate and smooth traffic during peak hours in the communication network in a way that it creates coded multicasting opportunities in addition to delivering content to users locally. However, it suffers from imposed delay resulting from coding that makes this approach infeasible for delay-sensitive contents, namely video streaming applications. So... 

Power amplifiers are used as the last block of transmitters. This block can be categorized as the one of most important part in communication systems. However, in transmitter systems which require high power to create stable link with the receivers, fabrication process like CMOS are unable to provide such level of power. Thus, designers employ another group of integrated circuits which names MMIC that offers this capability to designers. MMIC is the abbreviation of Microwave Integrated Circuit which is implemented in compound substrates like GaAs. Monolithic microwave integrated circuits enable the implementation of amplifiers in small size, large number, with high precision and appropriate... 

Platinum nanotubes were deposited inside the pores of polycarbonate template with the pore size of 200 nm by electrochemical methods. In this regard a solution containing of 0.05 M H2PtCl6 and 0. 1 M H2SO4 in doubly distilled water was utilized. The electrodeposition process was studied by electrochemical techniques such as voltammetry and chronoamperometry methods. It was observed that the process was conducted in several stages including; nucleation and growth in steady state regime. Furthermore, it was concluded that electrodeposition was affected by mass transport restriction and was controlled by a diffusion process. In this regard, all the voltammograms were shifted to more negative... 

Today Ethernet is the predominant technology for implementing Local Area Networks. Its privileges encourage service providers to extend Ethernet from Local Area Networks to Metropolitan Area Networks or even Wide Area Networks. Ethernet benefits such as low operational costs, well interoperability, plug-n-paly characteristic and rapid provisioning on demand make Ethernet ideal for Metropolitan Area Networks.But Ethernet by itself has some weakness like flat structure that makes it unfit for use in Metropolitan Area Networks. A suitable solution for taking advantages of Ethernet benefits in service provider network is using Ethernet in access network and applying multi-point to multi-point... 

Vehicular ad-hoc networks have attracted the attention of many researchers during the last years due to the emergence of autonomous vehicles and the safety concerns regarding their use in near future. One of the major applications in this domain is the usage of vehicle to vehicle communication for warning message dissemination in dangerous situations to prevent more damage. A number of schemes have been proposed regarding the selection of forwarding nodes in this application and there is a need for developing frameworks for analysis and comparison of the schemes in fair situation. Most of the proposed frameworks make use of simulation techniques for the analysis of schemes. However, due to... 

Paper and cardboard waste pulping consume large volumes of water, so the discharge of this effluent without proper treatment can have far-reaching environmental consequences. The color and variable COD concentration of wastewater in this industry make treating this wastewater complicated. Therefore, this study aims to reduce the COD of the wastewater treatment plant of a pulp and paper mill under different laboratory conditions to achieve environmental standards in Iran.In this study, coagulation-flocculation and the Fenton process on the wastewater entering the treatment plant were investigated first. It was found that coagulation and flocculation by 750-1250 ppm of alum coagulant and ten... 

Increasing population growth and scarcity of fresh water resources have created the challenge of water supply, especially in the Mena region. Thus, many countries in the region have turned to innovation in the development of high-energy seawater desalination technologies. Utilizing the waste heat of refineries in the desalination industry can reduce costs and preserve the environment. In this article, effective ways to use the waste heat of other flue recovery steam of Bandar Abbas oil refinery are investigated. The integration of the heat recovery system consisting of recuperative heat exchangers and heat pipes with thermal desalination plants is investigated by multi-stage flash and... 

In order to investigaton of dynamics behavior and determination of the aeroelastic stability of the turbomachine blade. the turbomachine blade is modeled by using the beam model, taking into account all degrees of freedom, the effect of warping, rotation and seting angle. For aerodynamic modeling, the Smith and Whitehead models are used which are valid in subsonic flow. The validity of the derived formulation is confirmed through comparison with those obtained from the finite element software and the available results in the literature. Then, by using the state feedback controller, the effect of sensor and piezoelectric actuator on the vibrations reduction of the structure and increasing the... 

In this study, counterflow heat transfer around a rotating cylinder, heated and cooled cylinders, as well as through converging and diverging channels with hyperbolic, elliptical, and forward- and backward-facing step geometries, is numerically investigated. The simulations are performed using the two-fluid model based on the Gorter–Mellink formulation, with the primary objective of achieving a deeper understanding of superfluid helium behavior and improving the design of thermal heat exchangers. To this end, a novel algorithm is developed to couple the momentum equations of the two components with the pressure field. Unlike many previous studies, common simplifying assumptions are avoided,...