Sharif Digital Repository

In this paper, the performance of some popular direct interconnection networks, namely the mesh, torus and hypercube, are studied with adaptive wormhole routing for different traffic patterns. We investigate the effect of the number of virtual channels and depth of their buffers on the performance of such strictly orthogonal topologies under uniform, hot-spot and matrix-transpose traffic patterns for generated messages, while the total buffer size associated to each physical channel is kept constant. In addition we analyze the effect of escape channel buffer length on the performance of a fully adaptive routing algorithm. It is shown that the optimal number of virtual channels and buffer... 

As the increasing demands of military detection, wireless communication and remote sensing make the spectrum even more crowded, radar sequence design meeting spectral compatibility requirement is a challenging and urgent problem. This study is devoted to designing optimised phase-coded sequences which keep spectral-compatible with the overlaid electromagnetic radiators and at the same time optimise the signal-to-interference-plus-noise ratio (SINR). First, an intelligent dynamic spectrum information around the radar system is achieved by a radio environmental map. The information is introduced to form a constrained optimisation process aimed at improving the spectral compatibility and the... 

In this paper, the parallel implementations of different iterative polynomial root finding methods on a processor with SIMD processing capability are reported. These methods are based on the construction of a sequence of approximations that converge to the set of roots. We have chosen four widely used methods namely Newton's, Durand-Kerner's, Aberth-Ehrlich's, and QD and implemented them using the SIMD instruction set of the Pentium processor with C++ and assembly language. Experiments show that a speedup of 3 or higher can be achieved, depending on the order of polynomial, required accuracy, and the method employed. © 2005 IEEE  

The present work describes sensing application of modified TiO 2 nanotubes having carbon-Pt nanoparticles for simultaneous detection of dopamine and uric acid. The TiO 2 nanotubes electrode was prepared using anodizing method, followed by electrodeposition of Pt nanoparticles onto the tubes. Carbon was deposited by decomposition of polyethylene glycol in a tube furnace to improve the conductivity. The C-Pt-TiO 2 nanotubes modified electrode was characterized by cyclic voltam-metry and differential pulse voltammetry methods. The modified electrode displayed high sensitivity towards the oxidation of dopamine and uric acid in a phosphate buffer solution (pH 7.00). The electro-oxidation currents... 

In this study a novel Pt/Ni nanostructure consisting of nano-bushes and nanocubes was fabricated onto TiO 2 nanotubes. The scanning electron microscopy images showed that a large amount of well-dispersed nano-architectures had uniformly covered all over the surface which made an electrode with high surface area. It was obviously seen that the nanocube structures mainly consists of Ni had been grown on top of each other while the Pt colonies represented bush-like structures. As a non-enzymatic glucose biosensor, the Pt/Ni TiO 2 nanotubes modified electrode exhibited an excellent performance. The proposed biosensor had two linear ranges for detection of glucose from 0 to 0.12 mM (correlation... 

An electro-catalysis non-enzymatic electrode is proposed based on alloyed Pt/Ni nanowire arrays (NWAs) for the detection of glucose. The Pt/Ni NWAs were prepared by pulse electrodeposition of Pt and Ni within a nano-pore polycarbonate (PC) membrane followed by a chemical etching of the membrane. The electrode structure is characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The resulting Pt/Ni NWAs electrode shows high electrocatalytic activities towards the oxidation of glucose in alkaline solution. Consequently, a sensitive amperometric detection of glucose is achieved under 0.45 V vs. SCE with a low detection limit of 1.5 μM within a wide linear... 

A nanowire arrays system consisting of an ordered configuration of Pt, Ni and Co was constructed in single-bath solution through pulse electrodeposition. This structure was evaluated as a potential amperometric non-enzymatic sensor to detect glucose in alkaline solution. We observed a strong and fast amperometric response at low applied potential of 0.4 V vs. SCE over linear ranges of 0-0.2 mM and 0.2-8 mM glucose with sensitivities of 1125 and 333 μA mM-1 cm-2, respectively. We also observed a low detection limit for glucose of 1 μM. Correlation of the electronic and geometric modifications with the electrochemical performance characteristics enhanced catalytic activity of the electrode by... 

A simple modified TiO2 nanotubes electrode was fabricated by electrodeposition of Pd, Pt and Au nanoparticles. The TiO2 nanotubes electrode was prepared using the anodizing method, followed by modifying Pd nanoparticles onto the tubes surface, offering a uniform conductive surface for electrodeposition of Pt and Au. The performance of the modified electrode was characterized by cyclic voltammetry and differential pulse voltammetry methods. The Au/Pt/Pd/TiO2 NTs modified electrode represented a high sensitivity towards individual detection of dopamine as well as simultaneous detection of dopamine and uric acid using 0.1 M phosphate buffer solution (pH 7.00) as the base solution. In both case,... 

The catalytic activity of Pt/Ni/TiO 2 nanotubes electrode toward glucose has been studied. Fabrication of Pt/Ni nanostructures was done in a single-bath solution through electrochemical pulse method by changing the deposition potential between -0.3 and -4 V vs. SCE, respectively. The resulting modified electrode represented high conductivity due to the effective presence of metallic components and uniform surface area caused by dispersion of Pt and Ni nanostructures. The scanning electron microscopy images also confirmed that a large amount of metals colonies were well-dispersed at the edge of the TiO 2 nanotubes. In addition, the Pt/Ni TiO 2 nanotubes modified electrode exhibited an... 

Hydroxyapatite (HA) coatings were deposited on commercially pure titanium plates using a hydrothermal-electrochemical deposition method in an electrolyte containing calcium and phosphate ions. The deposition conditions used in this study were the followings: electrolyte temperature (33-80 °C), current density (1-8 mA/cm2), and deposition time (10-120 min). Needle-like and granular crystals of apatite coating were created with different concentrations of calcium (0.0021-0.042 M) and phosphate (0.00125-0.025 M) salts. The size of HA crystals of the coating was considerably changed with different concentration of calcium and phosphate salts, temperature of the electrolyte, and deposition time.... 

Zeolitic imidazole frameworks (ZIFs) provide an exciting platform to design and fabricate non-precious-metal carbon-based catalysts for oxygen reduction/evolution reaction (ORR/OER). Herein, we elaborately design a facile enzyme-assisted synthetic strategy that enables to tailor the ZIFs precursors into structural stable decussation shape, which derived Co nanoislands grafted on decussate N-doped carbon nanoleaves (D-Co@NC) can well retain the interpenetrating nanostructure. Benefiting from the combined advantages of compositions and interpenetrating nanostructures, D-Co@NC possesses 5.2 times higher exposed electrochemical active area than the conventional dodecahedral one, thus endowing... 

Considering the interaction of flexural moment and shear force in the steel frames with haunch or intermediate beam length and eccentrically braced frames with intermediate link length is a major concern of the structural analysis and design. This article contains two stages. In the first stage, to investigate the moment–shear interaction for the highly ductile steel I-sections, a study is carried out using finite element analysis and a simple and practical relationship is developed. In the second stage, a simple approach based on virtual work method for assemblage of interconnected rigid bodies is employed to consider collapse mechanisms with mixed hinges. Using this approach, the... 

Considering the interaction of flexural moment and shear force in the steel frames with haunch or intermediate beam length and eccentrically braced frames with intermediate link length is a major concern of the structural analysis and design. This article contains two stages. In the first stage, to investigate the moment–shear interaction for the highly ductile steel I-sections, a study is carried out using finite element analysis and a simple and practical relationship is developed. In the second stage, a simple approach based on virtual work method for assemblage of interconnected rigid bodies is employed to consider collapse mechanisms with mixed hinges. Using this approach, the... 

Dye-sensitized upconversion nanoparticles (UCNPs) have gained significant interest in biological applications. However, previous attempts to utilize these dye-sensitized UCNPs in the aqueous environment suffer from dramatic decline in the upconversion luminescence (UCL) intensity and problems with nanoparticles aggregation and water quenching. By employing indocyanine green (ICG) as a hydrophobic amplifier and energy harvester for UCNPs, we use a general, facile, and kinetically controlled mixing technology—flash nanoprecipitation (FNP)—to prepare aqueous stable ICG-sensitized UCNPs encapsulated by a biocompatible block copolymer poly (ethylene glycol)-b-poly (lactic-co-glycolic acid... 

Catalytic activity of carbon/Pt nanoparticles modified TiO 2 nanotubes electrode was studied by using dopamine contained solutions. The TiO 2 nanotubes electrode was prepared using anodizing method in aqueous solution. The electrochemical pulse method was then applied for electrodeposition of Pt nanoparticles onto the TiO 2 nanotubes. Further modification was achieved by decomposition of polyethylene glycol in a tube furnace to have a carbon/Pt nanoparticles modified TiO 2 nanotubes electrode. The final modified electrode could successfully detect the electro-oxidation of dopamine in a ImM contained solution using cyclic voltametry method. Also, a high sensitivity towards the oxidation of... 

Let G be a graph on n vertices with r := [n/2] and let γ 1 ≥ · · · ≥ γ n be adjacency eigenvalues of G. Then the Ḧuckel energy of G, HE(G), is defined as [Equation presented] The concept of Hückel energy was introduced by Coulson as it gives a good approximation for the π-electron energy of molecular graphs. We obtain two upper bounds and a lower bound for HE(G). When n is even, it is shown that equality holds in both upper bounds if and only if G is a strongly regular graph with parameters (n, k, γ, μ) = (4t2 + 4t + 2, 2t2 + 3t + 1, t2 + 2t, t2 + 2t + 1), for positive integer t. Furthermore, we will give an infinite family of these strongly regular graph whose construction was communicated... 

The floating photovoltaic (FPV) array, which consists of tens or hundreds of rows of floating photovoltaic systems, exhibits great economic and environmental benefits. An FPV array arranged in the ocean will be subjected to the combined action of wind, waves, and currents during the installation, service, and maintenance processes; however, systematic research in this field is still lacking. As a representative of the FPV array, this study on the hydrodynamic characteristics of a single-row FPV system is a fundamental prerequisite for the safe design of large-scale FPV arrays in the near future. In this paper, based on the potential theory, a numerical model of a single-row FPV system with... 

Rapid assessment of structural safety and performance right after the occurrence of significant earthquake shaking is crucial for building owners and decision-makers to make informed risk management decisions. Hence, it is vital to develop online and pseudo-online health monitoring methods to quantify the health of the building right after significant earthquake shaking. Many Bayesian inference–based methods have been developed in the past which allow the users to estimate the unknown states and parameters. However, one of the most challenging part of the Bayesian inference–based methods is the determination of the parameter noise covariance matrix. It is especially difficult when the number... 

Online selection of the appropriate model and identifying its parameters based on measured vibrational data are among the challenging issues in dynamic system identification. After a severe earthquake, quick monitoring and assessment of structural health status play a crucial role in effective critical risk management for the building owners and decision-makers. The Bayesian multiple modeling approach is a suitable tool for optimal model class selection, which is used in this article mainly for improving data fitting precision, decreasing dimensions of structural unknown vector through removing unnecessary parameters, detecting the occurrence and type of predominant phenomenon related to... 

Online selection of the appropriate model and identifying its parameters based on measured vibrational data are among the challenging issues in dynamic system identification. After a severe earthquake, quick monitoring and assessment of structural health status play a crucial role in effective critical risk management for the building owners and decision-makers. The Bayesian multiple modeling approach is a suitable tool for optimal model class selection, which is used in this article mainly for improving data fitting precision, decreasing dimensions of structural unknown vector through removing unnecessary parameters, detecting the occurrence and type of predominant phenomenon related to...