Sharif Digital Repository

Dye-sensitized upconversion nanoparticles (UCNPs) have gained significant interest in biological applications. However, previous attempts to utilize these dye-sensitized UCNPs in the aqueous environment suffer from dramatic decline in the upconversion luminescence (UCL) intensity and problems with nanoparticles aggregation and water quenching. By employing indocyanine green (ICG) as a hydrophobic amplifier and energy harvester for UCNPs, we use a general, facile, and kinetically controlled mixing technology—flash nanoprecipitation (FNP)—to prepare aqueous stable ICG-sensitized UCNPs encapsulated by a biocompatible block copolymer poly (ethylene glycol)-b-poly (lactic-co-glycolic acid... 

Sulfur-containing gaseous contaminant treatment is a key issue in the healthy and sustainable development of industry, especially SO2 and H2S occur with natural gas extraction and fossil fuel burning. Traditionally, the commercial method for H2S or SO2 requires numerous desiccants and enormous energy consumption. Encouragingly, electrochemical coupling system, which provide an efficient, sustainable, and economic pathway for sulfur-containing gaseous contaminants removal, can convert H2S and SO2 to recyclable substance in a moderate environment and simultaneously transfer the energy contained in them to other more valuable product. The current review discusses the mechanism and principle of... 

The global shift toward solar energy has resulted in the advancement of research into the manufacture of high-performance solar cells. It is critical to accurately model and identify the parameters of solar cells. Numerous models of solar cells have been presented thus far, including the single-diode, the double-diode, and the three-diode models. Every model contains a number of unidentified parameters, and numerous approaches for determining their optimal values have been published in the literature. The purpose of this article is to propose an efficient optimization technique, dubbed the Chimp Optimization Algorithm (ChOA), for estimating the model parameters of solar networks. The... 

The effect of bisulfite (HSO3–) in nCaO2/Fe(III)/HSO3– system on improving HO• generation and trichloroethene (TCE) removal was innovatively reported. The enhancement mechanism of HSO3– for TCE removal in nCaO2/Fe(III)/HSO3– system was caused not only by the complexing and reducing effects on promoting the conversion of Fe(III) to Fe(II), but also due to the reaction with O2 in water to produce SO4–• for accelerating TCE degradation. A double effect of nCaO2 as an oxidant source to generate HO• and as a O2 source to promote SO4–• generation was revealed. A pseudo-second-order kinetic model of TCE removal was determined and 94.6% TCE degradation was achieved within 60 min at the... 

We propose GraphOS, a system that allows a client that owns a graph database to outsource it to an untrusted server for storage and querying. It relies on doubly-oblivious primitives and trusted hardware to achieve a very strong privacy and efficiency notion which we call oblivious graph processing: the server learns nothing besides the number of graph vertexes and edges, and for each query its type and response size. At a technical level, GraphOS stores the graph on a doubly-oblivious data structure, so that all vertex/edge accesses are indistinguishable. For this purpose, we propose Omix++, a novel doubly-oblivious map that outperforms the previous state of the art by up to 34×, and may be... 

A simple modified TiO2 nanotubes electrode was fabricated by electrodeposition of Pd, Pt and Au nanoparticles. The TiO2 nanotubes electrode was prepared using the anodizing method, followed by modifying Pd nanoparticles onto the tubes surface, offering a uniform conductive surface for electrodeposition of Pt and Au. The performance of the modified electrode was characterized by cyclic voltammetry and differential pulse voltammetry methods. The Au/Pt/Pd/TiO2 NTs modified electrode represented a high sensitivity towards individual detection of dopamine as well as simultaneous detection of dopamine and uric acid using 0.1 M phosphate buffer solution (pH 7.00) as the base solution. In both case,... 

Hydroxyapatite (HA) coatings were deposited on commercially pure titanium plates using a hydrothermal-electrochemical deposition method in an electrolyte containing calcium and phosphate ions. The deposition conditions used in this study were the followings: electrolyte temperature (33-80 °C), current density (1-8 mA/cm2), and deposition time (10-120 min). Needle-like and granular crystals of apatite coating were created with different concentrations of calcium (0.0021-0.042 M) and phosphate (0.00125-0.025 M) salts. The size of HA crystals of the coating was considerably changed with different concentration of calcium and phosphate salts, temperature of the electrolyte, and deposition time.... 

Considering the interaction of flexural moment and shear force in the steel frames with haunch or intermediate beam length and eccentrically braced frames with intermediate link length is a major concern of the structural analysis and design. This article contains two stages. In the first stage, to investigate the moment–shear interaction for the highly ductile steel I-sections, a study is carried out using finite element analysis and a simple and practical relationship is developed. In the second stage, a simple approach based on virtual work method for assemblage of interconnected rigid bodies is employed to consider collapse mechanisms with mixed hinges. Using this approach, the... 

Considering the interaction of flexural moment and shear force in the steel frames with haunch or intermediate beam length and eccentrically braced frames with intermediate link length is a major concern of the structural analysis and design. This article contains two stages. In the first stage, to investigate the moment–shear interaction for the highly ductile steel I-sections, a study is carried out using finite element analysis and a simple and practical relationship is developed. In the second stage, a simple approach based on virtual work method for assemblage of interconnected rigid bodies is employed to consider collapse mechanisms with mixed hinges. Using this approach, the... 

Let G be a graph on n vertices with r := [n/2] and let γ 1 ≥ · · · ≥ γ n be adjacency eigenvalues of G. Then the Ḧuckel energy of G, HE(G), is defined as [Equation presented] The concept of Hückel energy was introduced by Coulson as it gives a good approximation for the π-electron energy of molecular graphs. We obtain two upper bounds and a lower bound for HE(G). When n is even, it is shown that equality holds in both upper bounds if and only if G is a strongly regular graph with parameters (n, k, γ, μ) = (4t2 + 4t + 2, 2t2 + 3t + 1, t2 + 2t, t2 + 2t + 1), for positive integer t. Furthermore, we will give an infinite family of these strongly regular graph whose construction was communicated... 

The floating photovoltaic (FPV) array, which consists of tens or hundreds of rows of floating photovoltaic systems, exhibits great economic and environmental benefits. An FPV array arranged in the ocean will be subjected to the combined action of wind, waves, and currents during the installation, service, and maintenance processes; however, systematic research in this field is still lacking. As a representative of the FPV array, this study on the hydrodynamic characteristics of a single-row FPV system is a fundamental prerequisite for the safe design of large-scale FPV arrays in the near future. In this paper, based on the potential theory, a numerical model of a single-row FPV system with... 

It has long been an aspirational goal to create artificial structures that allow fast permeation of water but reject even the smallest hydrated ions, replicating the feat achieved by nature in protein channels (e.g., aquaporins). Despite recent progress in creating nanoscale pores and capillaries, these structures still remain distinctly larger than protein channels. We report capillaries made by effectively extracting one atomic plane from bulk crystals, which leaves a two-dimensional slit of a few angstroms in height. Water moves through these capillaries with little resistance, whereas no permeation could be detected even for such small ions as Na + and Cl − . Only protons (H + ) can... 

Rapid assessment of structural safety and performance right after the occurrence of significant earthquake shaking is crucial for building owners and decision-makers to make informed risk management decisions. Hence, it is vital to develop online and pseudo-online health monitoring methods to quantify the health of the building right after significant earthquake shaking. Many Bayesian inference–based methods have been developed in the past which allow the users to estimate the unknown states and parameters. However, one of the most challenging part of the Bayesian inference–based methods is the determination of the parameter noise covariance matrix. It is especially difficult when the number... 

Online selection of the appropriate model and identifying its parameters based on measured vibrational data are among the challenging issues in dynamic system identification. After a severe earthquake, quick monitoring and assessment of structural health status play a crucial role in effective critical risk management for the building owners and decision-makers. The Bayesian multiple modeling approach is a suitable tool for optimal model class selection, which is used in this article mainly for improving data fitting precision, decreasing dimensions of structural unknown vector through removing unnecessary parameters, detecting the occurrence and type of predominant phenomenon related to... 

Online selection of the appropriate model and identifying its parameters based on measured vibrational data are among the challenging issues in dynamic system identification. After a severe earthquake, quick monitoring and assessment of structural health status play a crucial role in effective critical risk management for the building owners and decision-makers. The Bayesian multiple modeling approach is a suitable tool for optimal model class selection, which is used in this article mainly for improving data fitting precision, decreasing dimensions of structural unknown vector through removing unnecessary parameters, detecting the occurrence and type of predominant phenomenon related to... 

Rapid assessment of structural safety and performance right after the occurrence of significant earthquake shaking is crucial for building owners and decision-makers to make informed risk management decisions. Hence, it is vital to develop online and pseudo-online health monitoring methods to quantify the health of the building right after significant earthquake shaking. Many Bayesian inference–based methods have been developed in the past which allow the users to estimate the unknown states and parameters. However, one of the most challenging part of the Bayesian inference–based methods is the determination of the parameter noise covariance matrix. It is especially difficult when the number... 

Pesticides are indispensable in agricultural development, but their effectiveness is often hindered by natural factors like rain-off and degradation. Herein, tebuconazole nanopesticides (TEB NPs) with leaf-adhesive, water-stable, and small-sized were successfully prepared by flash nanoprecipitation using the biodegradable polyethylene glycol-b-poly (lactic-co-glycolic acid) as a carrier. The nanopesticides could be efficiently deposited on plant leaves with uniform distribution and exhibited a 14° lower contact angle with foliage compared to commercial suspensions. The encapsulation of TEB within the polymer enhanced its resistance to photolysis, resulting in a 5-h extension of its... 

Seven different types of gasification-based coal conversion processes for producing mainly electricity and in some cases hydrogen (H2), with and without carbon dioxide (CO2) capture, were compared on a consistent basis through simulation studies. The flowsheet for each process was developed in a chemical process simulation tool "Aspen Plus". The pressure swing adsorption (PSA), physical absorption (Selexol), and chemical looping combustion (CLC) technologies were separately analyzed for processes with CO2 capture. The performances of the above three capture technologies were compared with respect to energetic and exergetic efficiencies, and the level of CO2 emission. The effect of air... 

In this paper, the performance of some popular direct interconnection networks, namely the mesh, torus and hypercube, are studied with adaptive wormhole routing for different traffic patterns. We investigate the effect of the number of virtual channels and depth of their buffers on the performance of such strictly orthogonal topologies under uniform, hot-spot and matrix-transpose traffic patterns for generated messages, while the total buffer size associated to each physical channel is kept constant. In addition we analyze the effect of escape channel buffer length on the performance of a fully adaptive routing algorithm. It is shown that the optimal number of virtual channels and buffer... 

Protecting large-scale networks, especially Software-Defined Networks (SDNs), against distributed attacks in a cost-effective manner plays a prominent role in cybersecurity. One of the pervasive approaches to plug security holes and prevent vulnerabilities from being exploited is Moving Target Defense (MTD), which can be efficiently implemented in SDN as it needs comprehensive and proactive network monitoring. The critical key in MTD is to shuffle the least number of hosts with an acceptable security impact and keep the shuffling frequency low. In this paper, we have proposed an SDN-oriented Cost-effective Edge-based MTD Approach (SCEMA) to mitigate Distributed Denial of Service (DDoS)...