Sharif Digital Repository

The present paper studies the failure of concrete from the mesoscopic point of view. Biphasic cubic concrete samples containing spherical aggregates embedded in a homogenized mortar have been simulated using standard finite element method. Linear elasticity and damage-plasticity hypotheses are considered for the aggregates and mortar, respectively. Various triaxial loading conditions are assumed for each sample to generate adequate discrete failure points within the stress space. In the next step, the approximated failure surfaces of specimens are constructed using the Delaunay triangulation technique. The effects of mesostructural features such as aggregate grading curve, aggregate... 

This paper presents the design and implementation of a bidirectional distributed amplifier (BDDA) in a 0.18- boldsymbol mu ext{m} CMOS process. The performance of the BDDA is theoretically analyzed, and the optimum number of gain stages ( n-{ ext {opt}} ), maximum achievable power gain ( G-{P} ), and circuit bandwidth are formulated. In addition, a new formula for proper choice of the number of DA stages (i.e., n ) is offered where dc-power consumption of the circuit ( P-{ ext {dc}} ) is also considered. This formula optimizes G-{P}/P-{ ext {dc}} , and it is preferred over the conventional n-{ ext {opt}} formula. To validate the theoretical analyses, a 2-12-GHz BDDA with high output 1-dB... 

Feature vector extraction, based on local image texture, is a primitive algorithm for many other applications, like segmentation, clustering and identification. If these feature vectors are a good match to the human visual system (HVS), we can expect to get the appropriate results by using them. Gabor filters has been used for this purpose successfully. In this paper we introduce a novel refinement, with the use of Matching Pursuit (MP) to improve the Gabor based texture feature extractor. With this improvement, we show that the separability of different textures will increase. Another consideration in this work is computation complexity. Therefore, we limit the basis function set to reduce... 

In this study, the thermal buckling analysis of hybrid laminated plates made of two-layered functionally graded materials (FGMs) that are integrated with surface-bonded piezoelectric actuators referred to as (P/FGM)s are investigated. Material properties for both substrate FGM layers and piezoelectric layers are temperature-dependent. Uniform temperature rise as a thermal load and constant applied actuator voltage are considered for this analysis. By definition of four new analytic functions, the five coupled governing stability equations, which are derived based on the first-order shear deformation plate theory, are converted into fourth-order and second-order decoupled partial differential... 

Droplet-based microfluidics offers significant advantages, such as high throughput and scalability, making platforms based on this technology ideal candidates for point-of-care (POC) testing and clinical diagnosis. However, the efficiency of co-encapsulation in droplets is suboptimal, limiting the applicability of such platforms for the biosensing applications. The homogeneity of the bioanalytes in the droplets is an unsolved problem. While there is extensive literature on the experimental setups and active methods used to increase the efficiency of such platforms, passive techniques have received less attention, and their fundamentals have not been fully explored. Here, we develop a novel... 

The Cúk converter operating in discontinuous capacitor voltage mode (DCVM) inherently benefits from PFC features as unity power factor can be achieved by using a constant duty cycle and switching frequency. In this paper, the switch network modeling technique is applied to the Cúk converter operating in DCVM in order to develop its small-signal model under the assumption that it is fed by a dc voltage source. Afterwards, the model is extended to derive the small-signal behavior of the converter while operating as a PFC converter. The validity of the proposed model is confirmed by both simulation and experimental results  

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit... 

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive...