Sharif Digital Repository

Optical networks-on-chip are introduced as an alternative for electrical interconnects in many-core systems, due to their low delay and power consumptions, as well as their high bandwidths. Despite these advantages, physical characteristics of the photonic components are highly sensitive to thermal variations, which results in optical data misrouting through the optical networks at the presence of temperature fluctuation. In this paper, we propose a thermally-resilient all-optical communication approach which improves reliability, as well as performance of the optical networks. For this purpose, we take advantages of auxiliary waveguides and a novel wavelength assignment approach to avoid... 

Coping with the intrinsic limitations of electrical networks-on-chip, optical on-chip interconnect is emerged as a promising paradigm for future high performance multi-core designs. However, optical networks-on-chip (ONoCs) are drastically vulnerable to on-chip thermal fluctuation. Specifically, electrical power consumed by processing cores induces temperature drift, which may cause false paths for optical data communication through the network. Therefore, customizing electrical power distribution throughout the chip plays a critical role for reliable data communication in ONoCs. On the other hand, chip-scale distribution of electrical power is directly affected by mapping various... 

Integrated silicon photonic networks have attracted a lot of attention in the recent decades due to their potentials for low-power and high-bandwidth communications. However, these promising networks, as the future technology, are drastically susceptible to thermal fluctuations, which may paralyze wavelength-based operation of these networks. In this regard, precise addressing of thermally induced faults in optical networks-on-chip (ONoCs), as well as revealing practical methods to tackle this challenge will be a break-even point toward implementation of this technology. In this paper, thermal variation is investigated through analyzing on-chip power distribution, which is addressed by power... 

With the growing number of cores, high-performance systems face power challenges due to dominating communication power. Thus, attaining energy efficient high-bandwidth inter-core communication nominates photonic network-on chip as the most promising interconnection paradigm. Although photonic networks pave the way for extremely higher performance communications, their intrinsic susceptibility to thermal fluctuations intimidates reliability of system. This necessitates the development of methodologies to analyze and model thermal effects on network behavior. In this paper, we model temperature fluctuations of optical chips and analyze photonic networks in a holistic approach. We present a... 

There have been significant advances in fabrication of high-density microelectrode arrays using silicon micromachining technology in neural signal recording systems. The interface between microelectrodes and chemical environment brings great interest to researchers working on extracellular stimulation. This interface is quite complex and must be modeled carefully to match experimental results. Computer simulation is a method to increase the knowledge about these arrays and to this end the finite element method provides a strong environment for investigation of relative changes of the electrical field extension surrounding an electrode positioned in chemical environment. In this paper FEM... 

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit... 

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only... 

One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared  

It has been shown that using multiple antennas in a radar system improves the performance considerably, since multiple target echoes are received from different aspect angles of the target. In this way, the target detection is improved. However, when using multiple antennas, some problems, such as designing the transmit signals, synchronization, etc. emerge that should be solved. One of such problems is the receiver placement. Receiver placement deals with choosing a proper position for the receive antenna in order to optimize the whole system's performance. In this paper, a receiver placement procedure based on improving the radar ambiguity function is proposed for the case of a multisite... 

By employing the MIMO (multiple-input-multiple-output) technology in radar, some new problems emerged, that, in order to benefit the MIMO gains in radar, it was necessary to solve them suitably. One of such obstacles is determining the positions of receive antennas in a MIMO radar system with widely separated antennas (WS MIMO radar), since it is shown that the antennas' positions affect the whole system's performance considerably. In this study, a proper receivers' positioning procedure is proposed. To do this end, four criteria are developed based on the proposed MIMO detector and the MIMO ambiguity function. The simulations verify that the proposed positioning procedure improves the... 

Phenols and alcohols are silylated with hexamethyldisilazane (HMDS) under microwave irradiation in solvent-free condition in good to excellent yields  

Carbon capture is crucial for mitigating climate change and achieving global emissions reduction targets. Among various technologies, absorption-based methods using aqueous solvents are among the most common and efficient, offering high capture rates and retrofit capabilities for existing industrial facilities. However, selecting the optimal solvent is challenging due to its direct impact on the performance, efficiency, and cost-effectiveness of the carbon capture process. This research introduces a novel multi-class classification methodology for solvent selection in carbon capture. Leveraging a dataset of 656 data points, including features such as temperature, pressure, molar ratio, and...