Sharif Digital Repository

Optical computing has emerged as a promising candidate for real-ime and parallel continuous data processing. Optical devices that perform spatial and spatiotemporal transformations of optical signals are of great interest for a wide range of applications including ultrafast all-optical information processing and analog optical computations. Although plasmonic metasurfaces(for analog computing applications) was investigated in the past, they are not realizable. Consequently the silicon photonics is a good alternative for realizing these applications.Firstly, the optical computing and its important features explained and a common architecture was introduced. in addition, another two structures... 

Nowadays, metal matrix composites due to their magnificent properties, has met diverse applications in automobile, aerospace and military industries. Decreasing the reinforcement size from micro-meter to nano-meter, properties of these structures will be improved significantly. Better properties will lead to better applications for them in the future. Thus, the main objective of the current project was investigation on the mechanical properties of metal matrix nanocomposites produced with shock wave sintering. In order to gain this aim, first the sintering of nanoparticles was modeled. A new model was proposed to consider the neighboring particles effects. Using the model, sintering of many... 

This thesis works on certain type of underactuated mechanical systems with nonholonomic constrain, namely wheeled robots.Since this robots has different types, this work focuses specifically on three-wheeled robot. At first we know kinematic characteristics of robot system and equations of motion.To control this system, at first we will change equations to chain form, then control it by using known methods. It will be shown that between the known methods for convergence to a fixed point,irregular transformation is the best way for control systems in chain form.Also, with dynamic feedback linearization we can control robot on a trajectory that has a continuous third order derivatives. Then... 

Taghizadeh Manzari, M. (MehrdadThe main goals of this project are studding the effect of carbon nanotube on the properties of PA6/PA66 matrix and miscibility of PA6/PA66 blend. So PA6/PA66/CNT nanocomposites were compounded by melt mixing method and samples were prepared by injection molding. Due to study miscibility of PA6 and PA66, we used DMTA test and found that PA6 and PA66 are miscible because of existing one pick on DMTA graph. Also DSC test results confirmed that PA6 and PA66 are miscible. Moreover, according to DMTA results, modulus will be rose by increasing CNT content. Mechanical test showed same results in this case. Adding 1%CNT to matrix caused 10% improvement in modulus and... 

High-quality online services demand reliable and fast packet delivery at the network layer. However, clear evidence documents the existence of compromised routers in the ISP and enterprise networks, threatening network availability and reliability. A compromised router can stealthily drop, modify, inject, or delay packets in the forwarding path to launch Denial-of-Service, surveillance, man-in-the-middle attacks, etc. So researches tried to create intrusion detection methods to identify adversarial routers and switches. To this end, data-plane fault localization (FL) aims to identify faulty links and is an effective means of achieving high network availability. FL protocols use... 

Confining nematic liquid crystal between two curved boundary conditions while the nematic molecules have a degenerate planar anchoring leads to complex and beautiful textures of molecular disparagement(defect) in the bulk and on the surfaces. Such the liquid crystal shells are made with double-emulsion techniques in microfluidic devices have provided applications for micro-scale colloidal linkers.In this work, we have numerically minimized the elastic energy in one-constant approximation in present of Fournier’s degenerate surface potential with finite element method. The nematic shell is confined between two spherical surfaces that we have studied the final energies and their related... 

A liquid crystal is a state of matter composed of highly anisotropic building blocks. When liquid crystals are exposed to surfaces with given shapes and anchoring conditions, the orientation of their molecules gets spatially disordered and topological defects may form in the system. The interplay between liquid crystals and the geometry and topology of the colloidal particles has motivated extensive recent studies.In this thesis, we present the numerical modeling results for two faceted colloidal particles in a thermotropic nematic liquid crystal. To obtain the equilibrium nematic field with a finiteelement method, we numerically minimize the free energy of the system that based on the... 

Providing high bandwidth network infrastructures for ever increasing need of data transport is of great importance. The underling infrastructure for many communication services such as GSM/3G/4G mobile networks and Internet services is Synchronous Digital Hierarchy (SDH) optical transport systems. SDH are standardized protocols that multiplex multiple lower rate digital bit streams, such as E1 and Ethernet, and transfer them synchronously over optical fiber using lasers or LEDs. In addition to high data transfer rates, flexible network management and protection mechanisms have great importance, hence are part of SDH standards. In order to obtain flexible network architecture and protected... 

Development of Smart Grid and deployment of smart meters in large scale has raised a lot of concerns regarding customers’ privacy. Consequently, several schemes have been proposed to overcome the above mentioned issue. These schemes mainly rely on data aggregation as a method of protecting users’ privacy from the grid operators. However, the main problem with most of these schemes is the fact that they require a large amount of processing power at the meter side. This, together with the fact that smart meters don’t usually have a powerful processor, can cause the unavailability of smart meter data at the required time for operators of the grid, and at the same time disables smart meters from... 

Secure routing is a major key to service maintenance in wireless ad hoc networks. Ad hoc nature exposes the network to several types of node misbehavior or attacks. Wormhole attack is one of the most severe active attacks to mobile ad hoc networks. Noting the resource limitations in such networks, nodes may have a tendency to behave selfishly. Selfish behavior can have drastic impacts on network performance. We have proposed a Misbehavior-Tolerant Multipath Routing protocol (MTMR) which detects and punishes all types of misbehavior such as selfish behavior, wormhole, sinkhole and grey-hole attacks. The protocol utilizes a proactive approach to enforce cooperation. In addition, it uses a... 

With the increasing tendency of consumers to purchase from online stores and the remarkable growth of this industry in recent years, timely and cost-efficient delivery of goods to the final customer has become one of its major challenges. Accordingly, last-mile delivery has attracted significant attention from both researchers and practitioners. This study addresses a vehicle routing problem that considers customers’ ability to pick up their orders from selected centers and their possible presence at different locations within the planning horizon. This thesis aims to enhance customer satisfaction and reduce distribution costs by employing two innovative vehicle routing approaches. The first... 

Dynamic spectrum access with the aid of cognitive radio (CR) technology is a viable solution to spectrum scarcity. There are many military and emergency applications that require the use of cognitive radio ad-hoc networks (CRAHNs). In these net- works, nodes must first find each other in a wide spectrum and then exchange their desired data. The process of finding each other in a multichannel environment is a challenging task and is usually known as rendezvous. Since rendezvous is the first step in communication, disrupting will disable the nodes from establishing proper communication sessions. That results in a drastic degrade in the performance of the network. Therefore, it is important to... 

Spray-wall impingement is one of the phenomenon that associated in different subject such as spray cooling, combustion chamber and gas turbine. With the impingement of spray to the wall, liquid film begins to form. Wall film characteristics is still an important subject to study. Due to the various stages of liquid film formation from injection of spray till spray-wall impingement, the investigation of this phenomenon is far more complicated. This paper is meant to provide detailed data on spray-wall impingement and wall film formation physics with the help of computational analysis of OpenFOAM . A Lagrangian-Eulerian method based on discrete phase model (DPM) was employed to model... 

We prove that if an n-dimensional complete minimal submanifold M in hyperbolic space has sufficiently small total scalar curvature then M has only one end. We also prove that for such M there exist no nontrivial L^2 harmonic 1-forms on M  

One of the most promising strategies for fighting cancer is the drug delivery process using synthetic nanoparticles. Once in biological milieu, the nanoparticle surfaces get covered with a layer of biomolecules called the “Protein Corona”. The protein corona formation changes the nanoparticles interaction with the human body dictating a new fate for them. The protein corona composition is not only dependent on the nanoparticle itself, but also it is affected by the health condition of patients as recently discovered through the experimental studies. Here, the effect of disease on the protein corona formation is discussed through the molecular dynamics simulations. A multiscale simulation...