Sharif Digital Repository

Inverse method and artificial neural network were employed in modeling the rheological behavior of the AZ61 Mg alloy. The hot deformation behavior of these alloys was investigated by compression tests in the temperature range 250-350 °C and strain rate range 0.0005-0.1 s-1. Investigation of stress-strain curves and microstructure of the compression specimen illustrate occurrence of dynamic recrystallization. To determining parameters of two suggested constitutive equations global optimization technique, genetic algorithm, was used. The predicted results by inverse method and ANN depicted a good agreement with the experimental data even if the ANN results has shown the best predicted... 

Colorectal cancer (CRC) ranks as the third most aggressive tumor globally, and it can be categorized into two forms: colitis-mediated CRC and sporadic CRC. The therapeutic approaches for CRC encompass surgical intervention, chemotherapy, and radiotherapy. However, even with the implementation of these techniques, the 5-year survival rate for metastatic CRC remains at a mere 12–14%. In the realm of CRC treatment, gene therapy has emerged as a novel therapeutic approach. Among the crucial molecular pathways that govern tumorigenesis, STAT3 plays a significant role. This pathway is subject to regulation by cytokines and growth factors. Once translocated into the nucleus, STAT3 influences the... 

In the present study, polylactic acid (PLA)/polyethylene glycol (PEG)/multiwalled carbon nanotube (MWCNT) electrospun nanofibrous scaffolds were prepared via electrospinning process and their applications for the anticancer drug delivery system were investigated. A response surface methodology based on Box-Behnken design (BBD) was used to evaluate the effect of key parameters of electrospinning process including solution concentration, feeding rate, tip-collector distance (TCD) and applied voltage on the morphology of PLA/PEG/MWCNT nanofibrous scaffolds. In optimum conditions (concentration of 8.15%, feeding rate of 0.2 mL/h, voltage of 18.50 kV and TCD of 13.0 cm), the minimum experimental... 

The electro-mechanical impedance (EMI) method has been accepted as an effective technique for detecting damages in the Structural health monitoring (SHM). EMI at any point of the structure depends on material properties, geometry and boundary conditions that all appears in dynamic stiffness of the structure. In spite of the expensive experimental methods for measuring the mechanical impedance, or the cheaper one electromechanical impedance, of structures, various analytical methods could be substitutions for them. In this paper, an analytical method is developed to obtain the EMI response of L-shaped beams through calculating the dynamic stiffness of the structure. To verify the model, an... 

Using the general structure of the vacuum polarization tensor Πμν(k0,k) in the infrared (IR) limit, k0→0, the ring contribution to the QED effective potential at finite temperature and the nonzero magnetic field is determined beyond the static limit, (k0→0, k→0). The resulting ring potential is then studied in weak and strong magnetic field limits. In the weak magnetic field limit, at high temperature and for α→0, the improved ring potential consists of a term proportional to T4α5/2, in addition to the expected T4α3/2 term arising from the static limit. Here, α is the fine structure constant. In the limit of the strong magnetic field, where QED dynamics is dominated by the lowest Landau... 

Hereby a simple, low-cost and scalable route is being presented for preparation of binder-free electrodes of reduced graphene oxide (RGO) on Ni foam (Ni/Gr). In this regard, the Ni foams are dipped in graphene oxide (GO) slurry. Next, the GO loaded Ni foams are kept in a freeze dryer for 24 h and heated up to 800 °C in an inert atmosphere. In this approach, the amount of active materials can be easily optimized for capacitive deionization (CDI). The characterization of Ni/Gr electrodes revealed a 3D porous assembly of RGO on Ni substrate which is helpful for the fast ion diffusion and rapid electron transport. The electrochemical performance of the prepared electrodes is investigated in both... 

In this study, a thorough analysis of image reconstruction in an active millimetre-wave (MMW) cylindrical imaging system is performed. To improve the system's performance in terms of the total cost as well as the coupling effect, sparse multistatic arrays are desired. Nevertheless, the existing reconstruction methods fail to operate in sparse multi-static antenna-array systems. Therefore, to address these shortcomings, in this study, at first, the existing MMW mono-static cylindrical image reconstruction methods are modified in both single-frequency and wideband reconstruction platforms. Moreover, in order to further improve the image quality and the system cost, a sparse multi-static... 

Asynchronous data fusion is inevitable in track-to-track fusion for tracking high-speed targets. For low-speed targets, e.g., the movement of clouds, synchronization is insignificant and, depending on the application, may be disregarded. Real-time asynchronous fusion is a demanding task in sensor networks when the sensors are not synchronous in sampling-rate or in sampling-phase. In the method proposed in this paper, an estimator in the fusion center estimates the actual time of the sample with respect to the time-reference of the fusion center upon receiving the data from a sensor. Then, the computer of the fusion center uses predictions to transfer all the received data to the data... 

By the advancement in technology on one side, and governmental as well as social demands for lowest rate of driving accidents and reliable communication among vehicles on the other side, particularly in highways, vehicular ad-hoc networks (VANETs) are of special interest as a reliable approach to this aim. VANET is typically defined as the communication network for wireless communicating between vehicles in a region. One of the most important challenges in such networks is reliable routing of data packages among the vehicle users. Several VANET routing topologies are published in the literature; however, there is still a lack of reliable scheme. This is due to the nature of users behaviour... 

This paper addresses the problem of optimal power allocation in multiuser OFDM ad-hoc networks. Our objective is to maximize the weighted rate-sum of users under total transmit power constraint. Maximizing a weighted rate-sum is more amenable whereas appropriate weight assignment to different users, guarantees fairness among users. We propose a distributed algorithm for optimal power allocation based on reaching a consensus among users for power allocation. The proposed algorithm is tractable in the sense of computational complexity and requires only local information at each node. Simulation results and the analysis of the algorithm are presented to support the proposed idea. © 2006 IEEE  

The authors regret We have found, there is a problem with the image orders in the last version of the article that is being published online. In the accessible version, the caption of the images are exactly in the true orders, but the images are shifted up and they are not shown in their exact positions. This Corrigendumm is being released for revision of the image orders, like what they were in the accepted version of the manuscript. The materials are shown in the following pages. The authors would like to apologise for any inconvenience caused. [Formula presented] Scheme 1. Binder-free fabrications of the PPOGrCNT on nickel foam (Ni/PPOGrCNT electrode). [Formula presented] Fig. 1. (a)... 

Polyethylene oxide (PEO)/chitosan (CS)/graphene oxide (GO) electrospun nanofibrous scaffolds were successfully developed via electrospinning process for controlled release of doxorubicin (DOX). The SEM analysis of nanofibrous scaffolds with different contents of GO (0.1, 0.2, 0.5 and 0.7 wt.%) indicated that the minimum diameter of nanofibers was found to be 85 nm for PEO/CS/GO 0.5% nanofibers. The π-π stacking interaction between DOX and GO with fine pores of nanofibrous scaffolds exhibited higher drug loading (98%) and controlled release of the DOX loaded PEO/CS/GO nanofibers. The results of DOX release from nanofibrous scaffolds at pH 5.3 and 7.4 indicated strong pH dependence. The... 

In this paper, by applying a new permutation to the full-diversity block circular delay diversity (BCDD) space-frequency codes (SFCs), we show that their performance could be enhanced. Furthermore, we propose a new method for performing the permutation in the absence of partial channel state information at the transmitter. This new permutation, which is done based on artificial delay and power profiles (ADPPs), could improve the performance of the BCDD SFCs more than 3 dB as simulation results demonstrate  

A joint theoretical and experimental study of the kinetic and mechanism of the rearrangement of allyl p-tolyl ether was performed in order to study the kinetic and mechanism of the reaction. Experimental studies were performed in gas phase over a temperature range of 493.15-533.15 K. The experimental Arrhenius parameters of this reaction were measured to be Ea = 36.08 kcal mol-1, ΔS# = -7.88 cal mol-1 K-1, and Log A = 11.74, experimentally. Using GC for the mixture of the reaction with and without cyclohexene demonstrated that the reaction is clean without any radical intermediates. The experimental results show that the studied reaction is unimolecular and proceeds through a concerted... 

Polyphosphate reduced graphene oxide on Ni foam (PPO-RGO/NF) is synthesized by varying weight ratios of Na5P3O10 (PO): graphene oxide (GO) with a simple, scalable and low cost method through freeze-drying of the PO-GO/NF followed by thermal treatment of the prepared electrodes. The resulting samples are characterized using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), X-ray fluorescence spectroscopy (XRF), Brunauer-Emmett-Teller (BET), and raman spectroscopy methods. The results show that the weight ratio of PO:GO, considerably affect the... 

Due to the continuous depletion of freshwater resources, there is an urgent need to develop versatile and cost-effective approaches for water and wastewater treatment. Accordingly, this work has provided an excellent solution, first by providing a new semi-automated pilot-scale electrochemical setup for the production of sodium ferrate and second, by in-detail evaluation of the application of ferrate for the complete degradation of trifluralin (TRF) as one of the most dangerous and widely used agricultural herbicides worldwide. This reactor was manufactured in a user-friendly way using cheap and readily available materials for ease of scale-up in the industry. Under optimal conditions, using... 

We show that in the family of degree d⩾ 2 rational maps of the Riemann sphere, the closure of strictly postcritically finite maps contains a (relatively) Baire generic subset of maps displaying maximal non-statistical behavior: for a map f in this generic subset, the set of accumulation points of the sequence of empirical measures of almost every point in the phase space, is equal to the largest possible one, that is the set of all f-invariant measures. We also introduce an abstract setting to study non-statistical dynamics and sufficient conditions for their existence in a general family of maps. These sufficient conditions are related to the notions of “statistical instability” and...