Sharif Digital Repository

This paper investigates the behaviour of C-shaped and L-shaped angle shear connectors embedded in solid concrete slabs. An effective finite element model is proposed to simulate the push out tests of these shear connectors that encompass nonlinear material behaviour, large displacement and damage plasticity. The finite element models are validated against test results. Parametric studies using this nonlinear model are performed to investigate the variations in concrete strength and connector dimensions. The finite element analyses also confirm the test results that increasing the length of shear connector increases their shear strength proportionately. It is observed that the maximum stress... 

Abstract: In this investigation, monodisperse CuGaS2 nanoparticles intended for use as visible-light-absorbing materials were synthesized using a facile one-step heating method that involved dissolving the precursors copper chloride, gallium acetylacetonate, and thiourea in a solvent consisting of either oleylamine alone or a combination of oleylamine, oleic acid, and 1-octadecene. The shapes of the resulting nanoparticles were either elongated, polygonal, or a mixture of both, depending on whether the crystal structure of the nanoparticles was predominantly wurtzite, predominantly chalcopyrite, or a more balanced mixture of both wurtzite and chalcopyrite (i.e., the nanoparticles were... 

Wheat stands as the foremost cultivated crop in Pakistan, dominating in terms of acreage and production among cereals. The morphology of wheat grains has been a target of selection since the dawn of agriculture and remains a paramount focus in contemporary breeding efforts. This study sought to examine alterations in grain morphology using digital imaging across 64 bread wheat cultivars grown in Pakistan under both well-watered and water-limited conditions, while also exploring their link with the TaCWI gene. The analysis revealed a substantial range of variation in grain morphology encompassing more than 15fifteen descriptors among the cultivars. Historically significant wheat cultivars,... 

Background: Diesel mainly consists of paraffin and thio-aromatic compounds. Sulfur present in diesel exhaust is the major challenge for oil refineries. Sulfur is an oxidizing element that discharges as acute pollutant in the environment, having adverse effects on human and animal life. Introduction: The scope of this review paper is to discuss and highlight the recent advancements in the process of desulfurization of diesel oil to explore the less energy-intensive and more economical process. Methods: Recently, different techniques are widely used for desulfurization of diesel oil to remove sulfur containing compounds from diesel. These techniques mainly involve hydrodesulfurzation,... 

Background: Water contamination by noxious heavy metals due to urbanization is a global environmental problem. Heavy metal ions pollution makes the water unsuitable for drinking and is also highly toxic to human beings and eco-system. The remediation of heavy metals is therefore very crucial. Methods: Adsorbents based on biopolymer and eco-friendly polymer composites have been developed and fabricated to remediate and remove heavy metals from the ecosystem. Results: In recent years biocomposites have been successful as cost-effective adsorbents for the remediation of various contaminants with their eco-friendly nature and sustainability. Conclusion: This review article gives an overview on... 

This study investigates numerically the behavior of tilted angle shear connectors embedded in solid concrete slabs. Two different tilted angle connectors were used, titled angle with 112.5 and 135 degrees between the angle leg and steel beam flange. A nonlinear finite element model was developed to simulate and validate the experimental push-out tests. Parametric studies were performed to investigate the variations in concrete strength and connector's dimensions. The results indicate that the ultimate strength of a tilted angle shear connector is directly related to the square root of the concrete compressive strength. The effects of variations in the geometry of tilted angle connectors on... 

The aim of this paper is to examine the characteristics and conduct of boards in non-financial Malaysian firms, with a particular emphasis on the companies’ financial leverage, using panel data spanning from 2012 to 2018. Overall, the study reveals that the relationship between board attributes and a firm’s financial leverage is significant, but mixed. Notably, we find that extremely small or large boards are ineffective in maintaining the optimal financial leverage level that benefits all stakeholders. Our study concludes that board independence is negatively correlated with financial leverage, whereas the tenure of board members is negatively associated with financial leverage.... 

An accurate examination of deformability of rock samples in response to any change in stresses is deeply dependent on the reliable determination of properties of the rock as analysis inputs. Although Young’s modulus (E) can provide valuable characteristics of the rock material deformation, the direct determination of E is considered a time-consuming and complicated analysis. The present study is aimed to introduce a new hybrid intelligent model to predict the E of granitic rock samples. Hence, a series of granitic block samples were collected from the face of a water transfer tunnel excavated in Malaysia and transferred to laboratory to conduct rock index tests for E prediction. Rock index... 

An accurate examination of deformability of rock samples in response to any change in stresses is deeply dependent on the reliable determination of properties of the rock as analysis inputs. Although Young’s modulus (E) can provide valuable characteristics of the rock material deformation, the direct determination of E is considered a time-consuming and complicated analysis. The present study is aimed to introduce a new hybrid intelligent model to predict the E of granitic rock samples. Hence, a series of granitic block samples were collected from the face of a water transfer tunnel excavated in Malaysia and transferred to laboratory to conduct rock index tests for E prediction. Rock index... 

The microfluidic device, known simply as microfluidics, is an emerging technology that has become a significant tool for pharmaceutical businesses to process and analyze materials for developing, optimizing, testing, and delivering various drugs in advanced nanocarriers. Technically, microfluidics is a technique to handle small solution volumes (nanoliters to picoliters) in microchambers of different geometries and dimensions ranging from a few nanometers to hundreds of micrometers. Each year, many pharmaceutical drug delivery systems have failed clinical translation because of scale-up problems. Now, scientists are trying to find some suitable alternatives and more robust methodologies to... 

A one-pot method was used to synthesize CuInxGa1-xS2 nanoparticles by substituting In3+ with Ga3+. The samples with composition of gallium ranging from 0% to 100% were synthesized by solving copper chloride, indium trichloride, gallium acetylacetonate, and thiourea as precursors in 1-octadecene, oleylamine, and oleic acid as noncoordinating, coordinating, and capping agent solvents, respectively. Depending on the chemical composition and synthesis conditions, the morphology of the as-synthesized nanoparticles obtained was trigonal, semitrigonal, hexagonal, and quasi-spherical. X-ray photoelectron spectroscopy and X-ray diffraction confirmed that Ga3+ substituted In3+ without any segregation... 

Magnetic spinel ferrite nanoparticles (MSF-NPs) are potential candidates for biomedical applications, especially in cancer diagnosis and therapy due to their excellent physiochemical and magnetic properties. In the current study, MSF-NPs were fabricated by sol-gel auto combustion method. The crystal structure and surface morphology were confirmed by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The magnetic properties were studied by VSM (vibrating sample magnetometer). As increasing Gd3+ concentration, the saturation magnetization values decreased from (17.8-2.3) emu/g, while the coercivity decreased from (499-133) Oe at room temperature. Finally, the fabricated MSF-NPs... 

For the 4th IUPAP International Conference of Women in Physics, we report on activities in science and engineering in Iran, and conditions for women in physics, in the three years since the 3rd IUPAP International Conference of Women in Physics was held in 2008. Iran has made prominent advancements and astonishing progress in laser technology, biotechnology, nanotechnology, genetics, computer software and hardware, and robotics. Iranian scientists have been very productive in several experimental fields, such as pharmaceutical, organic, and polymer chemistry. Conditions for women in physics have improved greatly in recent years. A project to improve the environment for learning physics, and... 

The lead is a heavy metal with hazardous impacts on environment and human life. Lead-free perovskite solar cells have attracted much attention in recent years, due to eco-friendly characteristics. Meanwhile, Pb-containing cells showed the highest efficiencies among the various types of cells. Hence, designing novel Pb-free solar cells with comparable or better performance than the Pb-containing ones is highly required. In this work, a lead-free methyl-ammonium-germanium-iodide (MAGeI3)-based perovskite solar cell with ITO/TiO2/MAGeI3/Spiro-OMeTAD/Ag multilayer nanostructure has been proposed and its main characteristics including open-circuit voltage (VOC) and power conversion efficiency (η)... 

Core/shell structure of ZnO nanowires coated with a monolayer of TiO 2 is investigated using Density Functional Theory (DFT). The electronic states of the semiconductor is calculated and compared before and after coating of the TiO2 monolayer on a ZnO [101 0] surface. The effect of TiO2 coating induce surface states changes and shifts the conduction and valence band edges to higher energies. Our results, in qualitative agreement with the experimental work of Matt Law et al. (J. Phys. Chem. B, 110, 22652), show an increase in open circuit voltage and a decrease in short circuit current in ZnO/TiO2 core shell dye sensitized solar cells. Regarding the semiconductor density of states (DOS), TiO2... 

Due to the important role of commitment and trust in the relationship marketing, the factors which can directly result in a committed relationship along with the factors which can influence the commitment through influencing trust, according to the model of commitment and trust by (Morgan & Hunt, 1994) have been introduced and their level of importance has been investigated here. The article uses fuzzy cognitive maps (FCMs) in the proposed model to find the most important paths leading to relationship commitment. The FCM analyzes the responses of a group of 30 people including general practitioners in dentistry, managers of dental departments in some of the public clinics and hospitals who... 

Conventionally, a film of TiO2 particles of 300 nm size is employed in Dye-sensitized solar cells (DSCs) as the back reflector film to enhance the light harvesting. Perfect reflectance of silver in visible and near infrared motivates to investigate its potential as the material for the light back reflector film in DSCs. In this study, light back reflector films consisting of 300 nm-sized silver particles, as well as vacuum evaporated silver flat film, were fabricated and compared to 300 nm-sized rutile-type TiO2 particulate reflector film to study their optical aspects. Conventional TiO2 rutile-type particulate film demonstrates slightly lower performance... 

Monolithic dye-sensitized solar cells are conventionally fabricated using carbon composite layer as the counter electrode. In the current research, the brittle carbon composite layer is replaced with a metal foil, aiming to decrease the device series resistance and using less catalyst material in counter electrode. This metallic structure has also an advantage of mechanical strength and decreases the fabrication complexity. The counter electrode is prepared by electrodepositing Cr film followed by electrodepositing Pt nanoparticles on a metal foil. As the porous spacer layer, different composite layers of SiO2, TiO2, and Al2O3 are investigated and the best results are obtained for TiO2... 

Nowadays, the need for green energy resources is being felt more than at any other time due to the critical level of carbon emission and its considerable effects on the environment. Hydrogen as a promising substitute for fossil fuels can be produced via water splitting reactions and be applied in a carbon-free cycle. As one of the main pillars of the 4th industrial revolution, additive manufacturing (AM) technologies are attractive trends toward fabrication of the electrolyzers and electrodes with high surface area and customized architecture in an automated, time-saving, and waste-reducing manner. This review is devoted to electrocatalytic water splitting reports in which additive... 

Microbial fuel cells (MFCs) have been a potential green energy source for a long time but one of the problems is that either the technology must be used on a large scale or special equipment have been necessary to keep the fuel cells running such as syringe pumps. Paper-based microbial fuel cells do not need to have a syringe pump to run and can run entirely by themselves when placed in contact with the fluids that are necessary for it to run. Paper-based microbial fuel cells are also more compact than traditional MFCs since the device doesn't need any external equipment to run. The goal of this paper is to develop a microbial fuel cell that does not require a syringe pump to function. This...