Sharif Digital Repository

Usually the digital phase shifters are used to steer the beam of a phased array antenna, and the accuracy of beam steering and other properties of the radiation pattern is dependent on the number of bits of the phase shifter and its resolution. In this paper the results of simulations, accomplished using a number of phase feeding methods in order to reduce the phase quantization error effects are presented and three new methods are introduced and compared with the previous works. Copyright 2006 IEICE  

In spite of the high success rate of existing total knee replacement implants, the aseptic loosening of components, particularly the tibial one, is a matter of concern. To control the short- and long-term loosening mechanisms, the tibial stem material shall have diverse stiffness properties in different regions and directions, such that it encourages osseointegration and prevents bone resorption. The previous studies in the literature have failed to provide designs which could satisfy these two requirements concurrently. The purpose of this study was to design heterogeneous and anisotropic porous titanium tibial stems, based on radial and axial functionally graded cellular (FGC) structures,... 

Predicting temperature distributions in the work-rolls during the hot slab rolling process is of great importance to mill designers. This is because the temperature distribution and the dimensional accuracy of the slab being rolled are both dependent on the work-roll temperature. In addition, the life of the roll is also a function of its own temperature distribution. In this paper, the unsteady state heat transfer equations with time dependent boundary conditions are coupled with a two-dimensional finite element method to predict the work-roll temperature distribution during the continuous hot slab rolling process. To achieve an accurate temperature field, the effects of various factors... 

Hot deformation behaviour of Ti–8Al–1Mo–1V alloy (Ti-811) was investigated through the hot compression tests at the temperatures of 950–1075 °C and at strain rates of 0.001–1 s−1. The flow curves of the Ti-811 alloy were successfully modelled by means of the sinh equation and constitutive equations were proposed for isothermal hot compression of Ti-811 alloy. According to the date of flow curves, the values were calculated for the strain rate sensitivity, stress exponent and activation energy. The amounts of the strain rate sensitivity, stress exponent, and activation energy were calculated as 0.19, 3.95 and 730 kJ mol−1 for α + β region and 0.21, 3.6 and 194 kJ mol−1 for β region,... 

La0.3Sr0.7FeO3-δ (LSF) perovskite was prepared according to two methods: (1) applying new phenolic derivative of serine amino acid (L) as chelating agent, and (2) in absence of L as ligand-free perovskite (LFP). The newly prepared aminophenolic ligand L was fully characterized by 1H and 13C NMR, IR as well as elemental analysis while the LSF perovskite samples were characterized using the IR spectra, powder x-ray diffraction (PXRD) patterns, and SEM micrographs. The PXRD pattern obtained for the perovskite prepared by L (PPP) indicated on the presence of pure perovskite phase. The hydrogen permeation through PPP and LFP membranes with thickness of 1.0mm were measured as a function of... 

New indeno- and naphtho-fused thiophenes were synthesized from reaction of 2-bromo-1-indanone and 2-bromo-1-tetralone with arylthioacetamides in good yields  

Side-channel attacks are a group of powerful attacks in hardware security that exploit the deficiencies in the implementation of systems. Timing side-channel attacks are one of the main side-channel attack categories that use the time difference of running an operation in different states. Many powerful attacks can be classified into this type of attack, including cache attacks. The limitation of these attacks is the need to run the spy program on the victim’s system. Various studies have tried to overcome this limitation by implementing these attacks remotely on JavaScript and WebAssembly. This paper provides the first comprehensive evaluation of timing side-channel attacks on JavaScript... 

In this study, a three-dimensional mathematical model, based on a nonuniform droplet concentration distribution, has been developed to simulate gas absorption in a venturi scrubber. The mass transfer process was illustrated by assuming the liquid phase as a combination of droplets and film. The flow, just as the annular two-phase flow, includes a flow of liquid film layer on the walls and a flow of gas and liquid drops in the core. Peclet number was determined using experimental data reported by Viswanathan et al. (1984) for distribution of droplets across the cross section of the scrubber. The mathematical model for gas absorption was justified by comparing the theoretical predictions with... 

A novel and cost effective method of bio-separation developed recently is magnetic separation technology. In this study, super paramagnetic Fe3O4 nanoparticles are used for separation of bovine serum albumin (BSA) protein from plasma/serum samples at optimized conditions. The synthesis of chitosan hydrogel networks by two variant approaches that involve (1) crosslinking of chitosan with formaldehyde and (2) formation of carboxy methyl chitosan mediated complex, was investigated and the percent of gelation, swelling ratio and equilibrium water content were calculated. The results revealed the formation of better quality hydrogel from the first approach. In step 1, to quantify the BSA... 

A systematic change of HZSM-5 (HZ5) as a catalyst of the methanol to aromatics (MTA) reaction was undertaken by employing a fixed-bed tubular-type reactor under ambient pressure, applying a weight hourly space velocity (WHSV) of 2 h-1 at 375 °C, as the first report on the application of low-Si/Al-ratio alkaline-[Mo,Na]-HZSM-5 in the MTA process. To characterize the surface and textural properties of the catalysts, powder X-ray diffraction (PXRD), nitrogen adsorption/desorption, temperature-programmed desorption of ammonia (NH3-TPD), pyridine-infrared spectroscopy (Py-IR), thermogravimetric analysis (TGA), and energy-dispersive X-ray (EDX) methods were employed. Gas chromatography (GC) and... 

Coiled carbon nanotubes (CCNTs) have increasingly become a vital factor in the new generation of nanodevices and energy-absorbing materials due to their outstanding properties. Here, the multiobjective optimization of CCNTs is applied to assess their mechanical properties. The best trade-off between conflicting mechanical properties (e.g., yield stress and yield strain) is demonstrated and the optimization of the geometry enables us to find the astonishing CCNTs with a stretchability of 400%. These structures have been recognized for the first time in the field. We derived several highly accurate analytical equations for the yield stress and yield strain by the implementation of... 

Growth arrest-specific gene 6 (GAS6) is a growth factor-like cytokine whose function is related with vitamin K. This protein interacts with receptor tyrosine kinase proteins such as Tyro3, Axl, and TAM Receptor family, therefore affecting the tumorigenic processes via different mechanisms. GAS6-antisense 1 (GAS6-AS1) is a long non-coding RNAs (lncRNAs) that is transcribed from a genomic regions nearby GAS6. This lncRNA is also implicated in the pathobiology of cancer. We intended to judge the role of GAS6 and GAS6-AS1 in the pathogenesis of breast cancer through appraisal of their expression levels in breast cancer tissues and their paired neighboring non-cancerous samples. Expression of... 

The low erosion resistance of titanium and its alloys has prevented their widespread application as joint implants. In addition, one essential requirement for the implants to bond with the living bone is the formation of a bone-like apatite on their surfaces in the host body. To enhance the erosion resistance of the surface, a diffused layer of TiB2 was formed at 1000uC on the commercial pure titanium. Hydroxyapatite was then coated on the boronised titanium by means of dip coating in a sol-gel solution. In order to confirm the biocompatibility of the specimens, they were soaked in a simulated body fluid for several days. The surface morphology of the specimens after exposure was studied by... 

Dibenzazocines were prepared via tandem dinucleophilic addition of phenols to quinolinium salts in good yields. The procedure is efficient, simple and the substrates are easily available  

As global population growth and technological advancements increase the demand for natural resources, the optimal use of water and energy is becoming essential, especially as these resources face overconsumption and climate change-related scarcity. Educating children about resource conservation is critical for fostering environmental awareness in future generations. In response, we developed a game-based learning environment that uses Virtual Reality (VR) and adaptive learning algorithms to teach children aged 7-9 about water and energy conservation. Sixteen children (8 boys and 8 girls) participated in two - 15-minute VR sessions on separate days. Between these sessions, participants... 

Observing eye movements can unveil people's focus and intentions during social interactions. To ensure appropriate engagement, social robots must direct their gaze accurately and anticipate actions. Our initial study aimed to train deep neural networks to replicate children's gaze patterns in social scenarios. Additionally, we aimed to assess the model's effectiveness when implemented on a Nao robot in real-world settings. We developed two video clips (one animated and one live-action) portraying social situations and employed eye-tracking technology to gather data from 12 children. Subsequently, we used the Transformer Network to analyze and model gaze patterns. Our models achieved 62-70%... 

In this research, the samples of a low carbon steel sheet were rolled up to a thickness prestrain of 67% at three different temperatures consisted of room, blue brittleness, and subzero temperature. Microhardness, SEM, and tensile tests were carried out to evaluate the static recrystallization kinetics defined by the Avrami equation, microstructural evolution, and mechanical properties. It was found that the Avrami exponent is altered with change in prestrain temperature and it achieves the value of 1 to 1. 5. Moreover, it was indicated that prestraining at subzero temperature followed by annealing at 600 °C leads to considerable enhancement in tensile properties and kinetics of static... 

A coiled carbon nanotube (CCNT) can be formed from the distortion of parent toroidal carbon nanotube with a uniform pitch length and a uniform spring rise angle. In this research molecular dynamics simulation was carried out to assess the tensile properties of three CCNT having indexes of (3,3), (4,4), and (5,5). The results indicated that Stone-Wales defects are necessary for thermodynamic stability of the CCNTs. The stress-strain curves showed that the yield stress, yield strain, and failure strain are decreased with increase in temperature. The force-displacement curves revealed that the spring constant of these materials is highly depended on the tube diameter and rising angle, while it... 

During the recent years, some Mg based alloys have extensively been considered as a new generation of degradable and absorbable bio-medical materials. In this work, the Mg–2Zn–1Gd–1Ca (wt%) alloy as a new metallic bio-material was produced by the casting process followed by the heat treatment. The samples of the alloy were solution treated at temperatures of 500, 550, and 600 °C and then quench aged at temperatures of 125, 150, and 175 °C. The results of SEM-EDS examinations indicated that the alloy microstructure consists of α-Mg matrix and the Ca2Mg6Zn3 and Mg3Gd2Zn3 secondary phases. With regard to the results of Vickers hardness test, the temperatures of 500 °C and 150 °C were selected... 

Robotic blimps have a wide range of applications, such as monitoring activities in their surroundings, advertising, and performing on stages. They also have remarkable capacities to be used as a social robot. In this research, a manually operated social robotic blimp has been developed intending to interact with children as a social agent and attract adults’ attention as an entertainer in indoor public environments. Since the appearance of a social robot has a significant impact on its acceptance, first, we acquired opinions of several participants on the shape of a desired floating robot. The results revealed that a simple spherical structure adequately draws people’s attention. After...