Sharif Digital Repository

The aim of the present study is to investigate the effects of using hybrid fibers on rheological, mechanical and durability properties of the high-strength Self-Consolidating Concrete (SCC). For this purpose, two types of fibers including hooked-end steel fibers and polypropylene fibers were used. In this study, a total of eleven mixtures were used: one as a control mix, one containing 0.5% steel fibers, four containing 0.5% hybrid fibers (steel and polypropylene), one containing 1.0% steel fibers and the four containing 1.0% hybrid fibers (steel and polypropylene). For investigating the rheological properties, slump flow, J-ring and V-funnel tests were performed. Mechanical properties were... 

Concrete-filled GFRP and PE tubes are composite systems using the polymeric tubes as confinement for the marine structures to extend their service life. However, elevated temperatures and thermal cycles in marine environments can affect the behavior of such composite systems. In this investigation, the effect of elevated temperatures and thermal cycles on the performance of concrete-filled pultruded GFRP tubes (CFPGT) and concrete-filled polyethylene tubes (CFPT) is assessed, respectively. For this, different parameters such as concrete core strength (30 and 60 MPa), exposure temperature (25, 100, 200, 300, and 400°C), time exposure (60 and 120 min.), number of thermal cycles (50, 100, and... 

Different parts of this research are focused on developing FO membranes and improving their performance. For this purpose, thin film composite (TFC) membranes with fixed composition of polyethersulfone/polyamide (PES/PA) have been used to investigate the effect of nanocomposites containing transition metal dichalcogenides (TMDs) on their performance. The support layer in all cases is PES, which is prepared through the phase inversion process and does not contain any nanofillers. The modification process takes place in the polyamide layer by dispersing the desired nanoparticles in the aqueous monomer solution necessary to form this active layer. Identification and characterization of... 

The first part of this thesis describes the synthesis and characterization of several Mn, Fe and Mo complexes containing tridentate Schiff base and oxazoline ligands and their reactivities as catalysts in the oxidation of organic compounds like olefins and sulfides, as well. The crystal structures of newly prepared cis-dioxo-bis[2-(2′-hydroxyphenyl)-oxazolinato]molybdenum(VI), cis-[MoO2(phox)2] and (N-hydroxyphenyl-salicylidenamine)(acetylacetonato)ethanol iron(III), [FeIII(N-OPh-sal)(acac)EtOH] complexes have been described by X-ray crystallography. Due to the difficulties in the preparation of suitable single crystals of novel... 

This thesis deals with the front-End of an Integrated RFID Reader operated in 860MHz to 960MHz, which integrates a RF transceiver including PA, LNA and Mixer. In the receiver part, a power amplifier was fabricated and measured and in the transmitter part, LNA and Mixer were designed. There is a growing interest in utilizing CMOS technologies for RF power amplifiers (PAs). Although several advances have been made recently to enable full integration of PAs in CMOS, it is still among the most difficult challenges in achieving a truly single-chip radio system in CMOS. This is exacerbated by supply voltage reduction due to CMOS technology scaling and on-chip passive losses due to the conductive... 

Inert gold become catalytically active when dispersed in the form of nanoparticles. Isolated gold nanoparticles have demonstrated high catalytic activity for both oxidation and reduction reactions. In order to obtain high catalytic activity, gold nanoparticles are generally dispersed on support materials, among which oxides are commonly used. However, a substantial decrease in activity and selectivity of the immobilized catalysts is frequently observed due to the heterogeneous nature of these support materials in reaction media. In the course of our study on the metal-based catalysis for synthesis of organic compounds, we herein report that rod-shaped Au nanoparticles in aqua solution... 

The 2-(2′-hydroxyphenyl)-oxazoline ligand (Hphox) is generated from 1:1 condensation of methyl salicylate with 2-aminoethanol. Novel [Ru(Hphox)2(H2O)2] (Hphox = 2-(2′-hydroxyphenyl)-oxazoline ) complex has been synthesized and characterized by physic-chemical methods. Oxidation of sulfides catalyzed by the mixed-ligand ruthenium(II) complex [Ru(Hphox)2(H2O)2]using urea-hydrogen peroxide (UHP) as oxidant was investigated under mild condition within 1 h. The results showed that mixed-ligand ruthenium(II) complex was effective catalyst in oxidation of sulfides in whichsulfoxideswere the only products. Using this catalytic system in the oxidation of alkanes, ketones were obtained as the main... 

In this work, synthesized Fe3O4 magnetic nanoparticles andcoated with SiO2 to prepare magnetic core-shell nanoparticles. Then immobilized Schiff baseof iron and vanadium complexes on magnetic core-shell nanoparticles was prepared as a recoverable magnetic nano catalysts. These catalysts were named Fe3O4@SiO2@L1@Fe, Fe3O4@SiO2@L2@Fe and Fe3O4@SiO2@L3@V. Furthermore,olefines epoxidation, sulfides and alcohols oxidation were studied with using iron and vanadium magnetic nano catalysts. The supported catalysts were characterized by atomic absorption, FT-IR and UV–Vis spectra.The catalytic performance of the synthesized iron catalyst was tested for the epoxidation of cyclohexene, styrene and... 

This thesisconsiders new fundamental approaches to yield heterogeneous catalysts in to three sections. The first section described the immobilization of the molybdenum-Schiff base complexes in pores of SBA-15 in two different methodologies depending on the actual structure of the complexes., (i) stepwise formation of the complex by initial covalent anchoring of one of the components and consecutive solid phase synthesis consisting of the condensation of the other components of the salen complex (iii) one-step complex immobilization by covalent binding through the ligand.Based on the first methodology, we report the preparation of ordered mesoporous silica SBA-15 containing a molybdenum... 

In nature, catalysis is of vital importance in a wide variety of biochemical processes catalyzed by metalloenzymes. The functions performed by the metalloenzymes and their significance have inspired a range of biomimetic studies, and intense efforts have been concentrated on the synthesis of low molecular weight complexes to model the spectroscopic features of such enzymes. Concomitantly, a challenging frontier in the field of biomimetic chemistry is the development of highly reactive model compounds that are able to effect rapid and selective substrate conversion. Some important catalytic transformations that have gained attention in recent years involve the carbon-carbon coupling, olefin... 

The selective oxidation of sulfides to sulfoxides is an important method in organic synthesis because sulfoxides are useful synthetic intermediates for the construction of various chemically and biologically significant molecules. To date, the most important method of preparation involves the oxidation of sulfides. Various oxidizing agents are used for this purpose. Oxovanadium(IV)(Salen) and oxovanadium(V)(Salen)Cl were synthesised and screened in the vanadium-catalysed oxidation of sulfides to solfuxides with urea hydrogen peroxide(UHP) as terminal oxidant. Both complexes showed good activity and selectivity trough the catalytic reaction.characterized by elemental analyses, IR, 1H and 13C... 

Fully integrated frequency synthesizer is one of the important system-on-chips building blocks. Among this circuit’s remarkable applications, Bioelectronics field is very common. In these applications, advanced microelectronic circuits are used in order to diagnosis and treatment of diseases. The aim of this thesis is design and implementation a wideband frequency synthesizer in a 0.18um CMOS technology. The main usage of this circuit is in a fully integrated implantable biomedical sensory chip. This circuit generates two necessary local signals in sensory chip to stimulus cells and process the information.
Frequency synthesizer is based on phased locked loop (PLL) circuit and produce... 

New dioxomolybdenum(VI) complex has been synthesized by reacting N-hydroxyphenyl-[5-(triphenylphosphonium)methyl]salicylideneamine chloride (PPh3-H2sap) as a water soluble ligand and [MoO2(acac)2] in ethanolic solution. The water soluble ligand (PPh3-H2sap) was prepared by reaction of 2-aminophenol with (3-formyl-4-hydroxybenzyl)triphenylphosphonium chloride as a water solublesalicylaldehyde derivative. The resulting complex with the formula [MoO2(PPh3-H2sap)(EtOH)] which contains an ethanol molecule in sixth site of coordination, was characterized by elemental analyses, 1H NMR,31P NMR, IR and UV-Vis spectroscopic studies. This complex was tested as a catalyst for the homogeneous... 

In most radio receivers like superheterodyne receivers, a weak desired incoming signal is accompanied with many interferer signals that are much more powerful than the desired signal itself. These interferers, also called blockers, can cause a great disturbance in the functionality of the receiver. Due to gain compression and an increase in the noise figure (NF) of the receiver, the blockers should be filtered before the arrival at the output of the LNA. Because of the low quality factors of the available on chip inductors and in order to eliminate the out of band interferer signals and image frequency (in superheterodyne receivers), usually an external surface acoustic wave (SAW) filter is... 

A web-based system is designed and implemented at cira.civil.sharif.edu as a risk communication tool to incentivize the society to take seismic risk mitigation measures. Risk denotes the expected monetary and social losses herein. The objective of this system is to raise the awareness of two groups of audience, i.e., the general public and policymakers,about the significant seismic risk in Iran. To address the general public, the system employs the notion of risk perception to put the results of sophisticated earthquake engineering risk analyses into perspective. The system also treats the epistemic uncertainty in the user input due to general public’s lack of technical knowledge through the...