Sharif Digital Repository

Dye sensitizers loaded on TiO2 decrease the electron excitation energy, thereby improving the photocatalytic performance by causing an increase in sensitivity under visible light irradiation. Three dye sensitizer precursors, Mordant Orange 1, N3 (red dye) and Cobalt (II) Phthalocyanine Tetrasulfonate (CoPcTs), were utilized to load the photocatalyst. The rate of the electron trapping process on platinum is clearly compatible with the migration rate of boundary electrons. Consequently, the migration of boundary electrons from the conduction band towards electron acceptors is increased by loading platinum onto the titanium dioxide. In this research, TiO2 was synthesized from a titanium... 

Enterocytozoon bieneusi is one of the most prevalent microsporidia species, responsible for more than 90% of human and animal microsporidiosis. Microsporidia species, particularly E. bieneusi, are frequently reported from waterborne and foodborne outbreaks. Therefore, early detection is crucial in clinics and outbreak investigations. This study aimed to design a loop-mediated isothermal amplification (LAMP) for rapid detection of E. bieneusi. Total DNA was extracted from 30 E. bieneusi –positive samples, which had been confirmed with nested PCR. LAMP primers were designed based on the identical fragment of small subunit ribosomal RNA (SSU rRNA) gene. LAMP reactions were performed at 63 °C... 

Advancements in material science and engineering, especially in the field of porous nanomaterials lead to new types of therapeutics and technologies. Among different types of porous nanomaterials, metal–organic frameworks (MOFs) have been considered the most promising inorganic nanomaterials due to their significant stability and ease of functionalization. To date, very limited research has been done on developing nanocomposites based on MOFs and MXenes. The current experiment has been performed to design a novel UiO-66 MOF and MXene nanocomposite, modified with Rosmarinus officinalis (RO) leaf extracts for co-delivery of doxorubicin (DOX)/clustered regularly interspaced short palindromic... 

Accurate system identification (SI) is essential for flight controller design of unmanned aerial vehicles and microaerial vehicles (MAVs). SI can be performed either in frequency or time domain using flight test data. As flight testing is often costly and may even lead to catastrophic events before some flight stability analysis is at hand, a low-cost 5 degree-of-freedom free motion platform (FMP) is designed and used for initial identification of MAVs via wind tunnel testing. A typical MAV is constructed as a test case and equipped with inertial sensors for testing and validation purposes. The proposed FMP allows for both rotational as well as translational motions that in turn provide for... 

Distributed generation connected with AC, DC, or hybrid loads and energy storage systems is known as a microgrid. Campus microgrids are an important load type. A university campus microgrids, usually, contains distributed generation resources, energy storage, and electric vehicles. The main aim of the microgrid is to provide sustainable, economical energy, and a reliable system. The advanced energy management system (AEMS) provides a smooth energy flow to the microgrid. Over the last few years, many studies were carried out to review various aspects such as energy sustainability, demand response strategies, control systems, energy management systems with different types of optimization... 

In this study, a series of highly swelling hydrogels based on sodium alginate (NaAlg) and polymethacrylamide (PMAM) was prepared through free radical polymerization. The graft copolymerization reaction was performed in a homogeneous medium and in the presence of ammonium persulfate (APS) as an initiator andN,N′-methylenebisacrylamide (MBA) as a crosslinker. The crosslinked graft copolymer, alginate-graft-polymethacrylamide (Alg-g-PMAM), was then partially hydrolyzed by NaOH solution to yield a hydrogel, hydrolyzed alginate-graft-polymethacrylamide (H-Alg-g-PMAM). During alkaline hydrolysis, the carboxamide groups of Alg-g-PMAM were converted into hydrophilic carboxylate anions. Either the... 

Malaysian secondary schools are facing a shortage of male teachers. Almost 70% of the teaching profession is dominated by female teachers. There is an obvious gap in the reason why teaching is not preferred by the male gender. This study intends to find the determinants of career success among male teachers with the hope of revealing the career success factors that are associated with male teachers. A survey was done among 140 male teachers in secondary schools in the state of Malacca, Malaysia. Results showed that 4out of 5 of the determinants factors are significantly explaining career success among the teachers (Emotional Intelligence, Person-Job-Fit, Career Adaptability & Work-Life... 

The influence of manufacturing parameters such as compacting pressure, heat treatment and microstructure on the static and dynamic properties of Fe-1.75 Ni-1.5 Cu-0.5 Mo-0.6 C was investigated. Wear and fatigue tests were carried out on reciprocate wearing and tension compression mode, respectively. The results show that delamination wear mechanism of sintered steel is similar to that of conventional wrought or cast materials. But, in sintered material, open porosity acts as sites of generation and collection of wear debris or formation of subsurface cracks. Wear rate is decreased and fatigue strength is increased by heat treatment. © 2002 Elsevier Science Ltd. All rights reserved  

The control of a brachiation robot has been the primary objective of this study. A brachiating robot is a type of a mobile arm that is capable of moving from branch to branch similar to a long-armed ape. In this paper, to minimize the actuator work, Pontryagin's minimum principle was used to obtain the optimal trajectories for two different problems. The first problem considers “brachiation between fixed branches with different distance and height,” whereas the second problem deals with the “brachiating and catching of a moving target branch”. Theoretical results show that the control effort in the proposed method is reduced by 25% in comparison with the “target dynamics” method which was... 

Reducing the size of the technology increases leakage power in Network-on-Chip (NoC) routers drastically. Power-gating, particularly in NoC routers, is one of the most efficient approaches for alleviating the leakage power. Although applying power-gating techniques alleviates NoC power consumption due to high proportion of idleness in NoC routers, since the timing behavior of packets is irregular, even in low injection rates, performance overhead in power-gated routers is significant. In this paper, we present SMART, a Scalable Mapping And Routing Technique, with virtually no area overhead on the network. It improves the irregularity of the timing behavior of packets in order to mitigate... 

In a MIMO (Multiple Input Multiple Output) radar system, proper design of transmit signal and receive filter is an advantageous tool to improve the detection performance. Thus, in this paper, we consider the problem of transmit code and receive filter design, in order to maximize the Signal to Noise Ratio (SNR) at the receiver while enforcing a similarity constraint between the transmit space-time code (STC) and a reference STC which has a desirable ambiguity function. We will show that by solving such constrained optimization problem through successive iterations, our proposed method leads to satisfactory results  

Background: Human papillomavirus (HPV)-associated malignancy remain a main cause of cancer in men and women. Cancer immunotherapy has represented great potential as a new promising cancer therapeutic approach. Here, we report Mesenchymal stem cells (MSCs) as a carrier for the delivery of oncolytic Newcastle disease virus (NDV) for the treatment of HPV-associated tumor. Methods: For this purpose, MSCs obtained from the bone marrow of C57BL mice, then cultured and characterized subsequently by the flow cytometry analysis for the presence of cell surface markers. In this study, we sought out to determine the impacts of MSCs loaded with oncolytic NDV on splenic T cell and cytokine immune... 

The present study tries to use the methanol-silver nanofluid filled thermosyphon heat exchanger and compares the effectiveness as well as energy saving with pure methanol. Experimental results show that using methanol-silver nanofluid, leads to energy saving around 8.8-31.5% for cooling and 18-100% for reheating the supply air stream in an air conditioning system  

Most of the publications regarding the maxim covering location problem (MCLP) address the case where the decision is to be made for one period. In this paper, we deal with a rather untouched version of MCLP which is called dynamic MCLP (DMCLP). In order to solve this problem, a simulated annealing (SA) has been presented. The proposed solution algorithm is capable of solving problems with up to 2500 demand nodes and 200 potential facilities with a fair amount of exactness. Our experiments showed that the proposed approach finds solutions with errors less than one percent  

The effect of the asymmetric water entry over a submerged part of a ship on the hydrodynamic impact is investigated numerically. A wedge body is considered and the problem is assumed to be two-dimensional. The results of symmetric and asymmetric impacts are compared. The effect is found significant in the numerical simulation. The maximum hydro-dynamic pressure at a heel angle of 10 degrees becomes about 95% more than that of the symmetric entry. The result of the present work proves the importance of asymmetrical hydrodynamic impact loading for structural design of a ship. Besides, the numerical procedure is not limited to a wedge type cross section and it is possible to apply it for any... 

The effect of ihe asymmetric water entry over a submerged part of a ship on the hydrodynamic impact is investigated numerically. A wedge body is considered 10 study and the problem is assumed to be two-dimensional. The Results of symmetric and asymmetric impacts are compared together. The effect is found significant in the numerical simulation. The maximum hydrodynamic pressure at a heel angle of 10 degrees becomes about 95% more than that of the symmetric entry. The result of the present, work proves the importance of asymmetrical hydrodynamic impact leading for structural design of a ship. Besides, the numerical procedure is not limited to a wedge type cross section and it is possible to... 

The aim of the present study was to evaluate the photocatalytic degradation of anthracene using Fe-doped TiO2 nanoparticles in the presence of UV. The structure and morphology of Fe-doped TiO2 nanoparticles were studied by X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The applied nanoparticles were synthesized by the sol–gel method. The effect of influential parameters on the degradation of anthracene, including pH, time, nanopar-ticles dosage, and the concentration of anthracene was studied. Using the UV/Fe-doped TiO2 system, the optimum experimental values were obtained to be as follows: pH = 7, contact time = 60 min, anthracene concentration =... 

In recent years, there have been significant improvements in various forms of image outlier detection. However, outlier detection performance under adversarial settings lags far behind that in standard settings. This is due to the lack of effective exposure to adversarial scenarios during training, especially on unseen outliers, leading to detection models failing to learn robust features. To bridge this gap, we introduce RODEO, a data-centric approach that generates effective outliers for robust outlier detection. More specifically, we show that incorporating outlier exposure (OE) and adversarial training can be an effective strategy for this purpose, as long as the exposed training... 

This paper resolve the salinity-dependent interactions of polar components of crude oil at calcite-brine interface in atomic resolution. Molecular dynamics simulations carried out on the present study showed that ordered water monolayers develop immediate to a calcite substrate in contact with a saline solution. Carboxylic compounds, herein represented by benzoic acid (BA), penetrate into those hydration layers and directly linking to the calcite surface. Through a mechanism termed screening effect, development of hydrogen bonding between –COOH functional groups of BA and carbonate groups is inhibited by formation of a positively-charged Na+ layer over CaCO3 surface. Contrary to the common... 

Heavy metal poisoning of soil from oil spills causes serious environmental problems worldwide. Various causes and effects of heavy metal pollution in the soil environment are discussed in this article. In addition, this study explores new approaches to cleaning up soil that has been contaminated with heavy metals as a result of oil spills. Furthermore, it provides a thorough analysis of recent developments in remediation methods, such as novel nano-based approaches, chemical amendments, bioremediation, and phytoremediation. The objective of this review is to provide a comprehensive overview of the removal of heavy metals from oil-contaminated soils. This review emphasizes on the integration...