Sharif Digital Repository

In this paper, we present a mathematical model for the idea of using more than one optical phase conjugate (OPC) module for coherent optical orthogonal frequency division multiplexing (CO-OFDM) systems in long-haul fiber optic channels. The four-wave mixing (FWM) formulation is derived for three different scenarios in which different numbers of OPC modules are used. The simulation results reveal that using more than one OPC modules leads to a much better BER performance operating on a typical OFDM system  

In this study, the authors evaluate the performance of asynchronous optical multi-carrier code division multiple access (MC-CDMA) for intensity modulated/direct detection systems to be used in next-generation optical access networks. The proposed system employs Gold sequence in frequency-domain to provide asynchronous resource sharing. In long-reach passive optical networks, fibre impairments degradation to the performance of ordinary optical CDMA can be avoided by frequency-domain digital compensation methods in the proposed MC-CDMA. In comparison with orthogonal frequency division multiple access, peak-to-average power ratio in the proposed MC-CDMA is reduced and asynchronous resource... 

In this paper, we present a design methodology with implementational insight and evaluate the performance of a multicarrier code-division multiple access (MC-CDMA) system using intensity modulation/direct detection scheme suitable for an indoor visible light communication (VLC) environment. The proposed system is a CDMA system based on an orthogonal frequency division multiplexing (OFDM) platform. To overcome the light-dimming issue, we use a newly proposed methodology, namely, polarity reversed optical OFDM (PRO-OFDM). A unipolar signal is either added to the minimum current or subtracted from the maximum current in the LED linear current range to provide various amounts of dimming. The... 

In this paper, we present and discuss the physical implementation and testing of a Spectrally-Encoded Spread-Time Code Devision Multiple Access (SE/ST-CDMA) transceiver. The proposed design is suitable for multiple-access and anti jamming wireless communication systems. The design and implementation takes into account the ability to automatically detect and mitigate tone jammers by altering the corresponding Gold sequence codes assigned uniquely to each user and setting the corresponding code's chip to zero. A simple real-time anti jamming mechanism capable of dealing with frequency hopping jammers is also proposed. The simulation results are provided in terms of Bit Error Rate (BER) versus... 

Synchronization of fractional-order hyperchaotic complex systems is an interesting phenomenon since it has several applications in applied sciences. Based on the complexity of hyperchaotic dynamical systems and unpredictability of hidden attractors, which may exist in their phase spaces and could be beneficial in secure communications, a scheme to derive the analytical formula of the control functions is stated to study active control synchronization. Further comparison of this analytical formula with numerical experiments yields an interesting agreement. A novel fractional-order complex Sprott system is proposed to study this kind of synchronization and its dynamics. A secure communication... 

In this paper, we propose an iterative block equalizer for long-haul Coherent Optical Orthogonal Frequency Division Multiplexing (CO-OFDM) communication systems. The proposed scheme is based on a soft Minimum Mean-Squared Error (MMSE) iterative block equalizer. Two different channel estimation methods are also discubed. The performance and computational complexity of the proposed iterative equalization and channel estimation techniques are evaluated as well. The obtained Bit Error Rate (BER) performance reveal that the iterative equalizer outperforms the linear equalizers by almost two orders of magnitude  

In Cognitive Radio (CR), in order to avoid interference in the Primary Users (PU), some subcarriers need to be deactivated. In systems based on Multicarrier Code Division Multiple Access (MC-CDMA), this causes losing orthogonality among different spreading codes, leading to poor Bit Error Rate (BER) performance. The performance of such system can be improved by using Generalized Hadamard Codes (GHC) instead of conventional Hadamard codes which avoids the loss of orthogonality. This is due to the fact that unlike conventional Hadamard codes, GHC are conjectured to exist for any arbitrary length. In this paper, we propose using a novel spreading code, namely, GHC for synchronous MC-CDMA in CR... 

In this paper, we propose utilizing multiple optical phase conjugate (OPC) modules along fiber spans, in order to improve the performance of coherent optical orthogonal frequency division multiplexing (CO-OFDM) communication systems in long-haul fiber-optic channels. The role of OPC in CO-OFDM systems is investigated by formulating the four-wave mixing (FWM) process generated along a CO-OFDM with two and three OPCs. Analytical results reveal that increasing the number of OPC modules reduces the average FWM power along the transmission link and as a result mitigates the degrading effect of interaction between amplified spontaneous emission noise and FWM. The proposed schemes have also been... 

In this paper, a new analytical method is presented that can be used to determine the behavior of particular steel beam-to-column extended end plate connection in linear and nonlinear regions. A common means of forming a rigid joint between a universal beam and column is to weld an end plate to the beam end and then to bolt it to the column. A physically based analytical method that can predict the behavior of bolted and extended end plate eave connections, using the connection dimensions as input, is presented. This article demonstrates an analytical procedure for the establishment of elastic and plastic parts of the M-χ curve of this form of connection. An analytical method is proposed for... 

In this paper, we evaluate the capacity of Multiple-Input Multiple-Output (MIMO) systems using directional antennas in non-isotropic scattering environments. Our analytical analysis approach results in closed-form approximate formulas in low Signal to Noise Ratio (SNR) regime (in contrast to previous research works which have investigated the same problem by employing experimental or simulation frameworks). We propose an upper bound for the introduced approximate error. Our results show that MIMO systems equipped with directional antennas may have much higher capacity in nonisotropic scattering environments compared to MIMO systems equipped with omni-directional antennas. We also evaluate... 

This paper has been prepared, based on reports regarding extraordinary induced ac voltage on buried gas pipelines in residential and industrial areas of the capital city of Tehran, especially in densely populated central areas. Also, some reports are considered on the existence of ac induced voltage in buried gas pipelines under the overhead transmission lines, for example, one case located 80 Km to the west of Tehran, in an agricultural region of the town of Abyek. In this paper, the results of an extensive theoretical, experimental and practical investigation and implementation of methods carried out during the last two years are introduced. Furthermore, this paper includes evaluation of... 

This paper addresses dynamic cell formation problem (DCFP) which has been explored vastly for several years. Although a considerable body of literature in this filed, two remarkable aspects have been significantly ignored so far, as uncertainty and human-related issues. In order to compensate such a shortage, this paper develops a bi-objective stochastic model. The first objective function of the developed model seeks to minimize total cost of machine procurement, machine relocation, inter-cell moves, overtime utilization, worker hiring/laying-off, and worker moves between cells; while the second objective function maximizes labor utilization of the cellular manufacturing system. In the... 

In this paper, trace locality of reference (LoR) is identified as a mechanism to predict the behavior of a variety of systems. If two objects were accessed nearby in the past and the first one is accessed again, trace LoR predicts that the second one will be accessed in near future. To capture trace LoR, trace graph is introduced. Although trace LoR can be observed in a variety of systems, but the focus of this paper is to characterize it for data accesses in memory management systems. In this field, it is compared with recency-based prediction (LRU stack) and it is shown that not only the model is much simpler, but also it outperforms recency-based prediction in all cases. The paper... 

We propose a novel framework for incorporating unlabeled data into semi-supervised classification problems, where scenarios involving the minimization of either i) adversarially robust or ii) non-robust loss functions have been considered. Notably, we allow the unlabeled samples to deviate slightly (in total variation sense) from the in-domain distribution. The core idea behind our framework is to combine Distributionally Robust Optimization (DRO) with self-supervised training. As a result, we also leverage efficient polynomial-time algorithms for the training stage. From a theoretical standpoint, we apply our framework on the classification problem of a mixture of two Gaussians in Rd, where... 

It is now known that at least 10% of samples with pancreatic cancers (PC) contain a causative mutation in the known susceptibility genes, suggesting the importance of identifying cancer-associated genes that carry the causative mutations in high-risk individuals for early detection of PC. In this study, we develop a statistical pipeline using a new concept, called gene-motif, that utilizes both mutated genes and mutational processes to identify 4211 3-nucleotide PC-associated gene-motifs within 203 significantly mutated genes in PC. Using these gene-motifs as distinguishable features for pancreatic cancer subtyping results in identifying five PC subtypes with distinguishable phenotypes and... 

As noteworthy properties of amine aqueous solutions, the densities and viscosities of aqueous N-Methyldiethanolamine (MDEA) solutions and mixtures of MDEA with 2-Amino-2-methyl-1-propanol (AMP), Diisopropanolamine (DIPA), Monoethanolamine (MEA), and Diethanolamine (DEA) were estimated under CO2 gas loading using Adaptive Neuro-Fuzzy Inference System (ANFIS), Multi-Layer Perceptron Artificial Neural Network (MLPANN), Support Vector Machine (SVM), and Least Square Support Vector Machine (LSSVM). The density and viscosity were estimated as a function of temperature, CO2 loading, pressure, and molecular weight of mixtures. In this regard, the actual data points were collected from the... 

A technique to achieve the globular weld structure using stirring the localized semisolid zone during butt-joining of zinc AG40A (Zamak-3) die cast alloy is reported. Since the semisolid temperature range of this alloy is very narrow, the accurate controlling of weld pool temperature must be considered. By presented process, globular microstructure of the weld zone can be achieved. Moreover the near weld zone would have the globular structure due to semisolid holding. A gas heating system was designed to heat up the nitrogen gas to desired temperature accurately. A heating element was embedded in a castable ceramic block while a stream of gas could pass closely around the hot element length.... 

Mechanical looseness is one of the common faults in rotating machinery. Wearing in the inner surface of the housing and outer race of the rolling element bearing (REB) increases the clearance and mechanical looseness that may lead to abnormal vibration in the machine. Mechanical looseness reduces the equivalent stiffness of the bearings leading to a reduction in the system's natural frequencies. In this study, finite element analysis (FEA) is used for numerical modeling of the mechanical looseness effect on the vibration characteristics of an industrial electrofan. To this aim, the variation of the shaft center displacement resulting from a specific load is investigated in terms of the...