Sharif Digital Repository

This paper focuses on cross-layer transmission based on rateless coding for relay channels. In the proposed method, rateless coding is used at packet level and a separate physical layer coding is used at the physical layer. As rateless codes are originally designed and optimized for erasure channels, using these codes at the physical layer can lead to significant performance degradation. The proposed scheme has the advantage of a cross-layer design which uses a rateless code at the packet level modeled by an erasure channel. Based on the analysis and simulation results provided in this paper, there is an exact tradeoff between physical layer code rate and rateless code depth, and the optimum... 

In this paper, we report on the design and analysis of filters and lenses realized by an array of metallic posts integrated in a parallel-plate waveguide (PPWG). The design methodology of these components is inferred from the modal analysis of a spoof surface plasmonic waveguide composed of metallic posts arranged in a 1D periodic structure inside PPWG. Samples of the proposed devices are analyzed using a full-wave analysis method and their performance is assessed. We show that the mentioned structure can be used to realize all-metallic band-pass filters and lenses for mm-wave and terahertz applications  

The focus of the paper is on cross-layer transmission based on rateless coding for relay networks. In the proposed method, rateless coding is used at the packet level and a separate physical layer coding is used at the physical layer. As rateless codes are originally designed and optimized for erasure channels, using these codes at the physical layer can lead to significant performance degradation. The proposed scheme has the advantage of a cross-layer design which uses a rateless code at the packet level modeled by an erasure channel. Based on the analysis and simulation results provided in this paper, the cross-layer scheme results in earlier successful decoding at the destination  

The proliferating utilization of electric drones across diverse operational domains necessitates frequent recharging of these aerial vehicles, imposing a substantial burden on the power distribution grid. This surge in demand exacerbates peak consumption levels within the distribution network, consequently leading to increased energy losses. Hence, there is an imperative need for a strategic management plan aimed at mitigating energy loss within the network. This study proposes an intelligent power management system tailored for efficiently handling the energy requirements of a large fleet of electric drones. Leveraging a mixed-integer nonlinear programming (MINLP) methodology, the proposed... 

Edit distance is one of the most fundamental problems in combinatorial optimization. Ulam distance is a special case of edit distance where no character is allowed to appear more than once in a string. Recent developments have been very fruitful for obtaining fast and parallel algorithms for both edit distance and Ulam distance. In this work, we present an almost optimal MPC algorithm for Ulam distance and improve MPC algorithms for edit distance. Our algorithm for Ulam distance is optimal in the sense that (1) the approximation factor of our algorithm is 1 + ϵ, (2) the round complexity of our algorithm is constant, (3) the total memory of our algorithm is almost linear (OH(n)), and (4)] the... 

In this paper a new least mean square (LMS) based adaptive weighting algorithm is proposed. It is appropriate for antenna array systems with moving targets and mobile applications. The essential goal of this algorithm is to reduce the complexity of weighting process and to decrease the time needed for adjusting the antenna radiation pattern. The main lobe of antenna will be adjusted in the direction of desired signal (main signal) and nulls pointed in the direction of undesired signals (interference signals). By predicting the relative velocity of source, the next location of the source will be estimated and the array weights will be determined using LMS algorithm before arriving to the new... 

Reducing the computational complexity as well as convergence time is the main task of adaptive antenna array processing. This article proposes an improved algorithm for estimating the weights of adaptive array elements based on Constant Modulus Algorithm (CMA). In this new type of algorithm, those weights that have higher effect on the radiation pattern will be estimated and antenna pattern will be adjusted by changing these weights. In this research, 3 new algorithms are proposed. By simulating these algorithms and comparing them with conventional full weight CMA, finally new algorithm that has a reduced complexity and an acceptable performance at different signal to noise ratios (SNRs) is... 

In order to restrain ferroresonance in coupling capacitor voltage transformers (CCVT), two kinds of ferroresonance suppression circuits (FSCs) , are proposed in this paper: the resonant type, the fastsaturation reactor type which are connected to secondary side of CCVTs. Frequency domain analyses, for voltage ratio magnitude, are carried out for CCVTs to obtain preferable FSC. Furthermore, using surge suppressors such as metal oxide varistors (MOV) to improve the performance of the FSCs is investigated. Time domain simulations demonstrate that ferroresonance can be cleared in few cycles in presence of FSCs. The Electromagnetic Transients Program (EMTP) is used for modeling and fine-tuning... 

The Haptic device is capable of interacting dynamically with the operator by the forces it can exert on human's hand. Controlling the haptic device and constraining it through the desired trajectory is the common task in the most of the training systems. Haptic interface application in virtual Persian handwriting learning system is investigated in this paper. Two different modes of learning is investigated: The full guidance mode, guides the user to follow a prerecorded trajectory by applying proper force to operator's hand; whereas in partial guidance, combination of haptics andvisual feedback guides the operator and prevents deviation from the desired trajectory. © 2009 IEEE  

One of the shortcomings of photoconductive (PC) antennas in terahertz (THz) generation is low effective radiated power in the desirable direction. In this paper, we propose a defective photonic crystal (DPC) substrate consisting of a customized 2D array of air holes drilled into a solid substrate in order to improve the radiation characteristics of THz PC antennas. The effect of the proposed structure on the performance of a conventional THz PC antenna has been examined from several aspects including radiation efficiency, directivity, and field distribution. By comparing the radiation performance of the THz antenna on the proposed DPC substrate to that of the conventional solid substrate, it... 

In this paper, arrays of two different terahertz (THz) antennas based on defective photonic crystal (DPC) substrates are proposed and their radiation characteristics are investigated by using full-wave simulation. We show that employing DPC substrates in THz photoconductive antenna (PCA) arrays reduces the amount of power coupled to the substrate surface waves and, as a result, decreases the mutual coupling between the elements of the antenna array and increases the directivity in the boresight direction. By studying 1 × 2 arrays of bowtie and four-leaf-clover-shaped antennas, we show that either the improvement of directivity in a broad bandwidth or the enhancement of photomixer antenna... 

Theoretical study of NH3(H2O) n=0,1,2,3 adsorption on (8, 0) carbon nanotube was performed at the X3LYP/6-31G* level of density functional theory (DFT). The tube-NH3 interaction was discussed in the terms of binding energy (EB), coupling energy (EC), charge density, molecular orbitals, and dipole moments. The results reveal that addition of water molecules to tube-NH3 system increases the interaction between tube and ammonia molecule  

Edit distance is one of the most fundamental problems in combinatorial optimization to measure the similarity between strings. Ulam distance is a special case of edit distance where no character is allowed to appear more than once in a string. Recent developments have been very fruitful for obtaining fast and parallel algorithms for both edit distance and Ulam distance. In this work, we present an almost optimal MPC (massively parallel computation) algorithm for Ulam distance and improve MPC algorithms for edit distance. Our algorithm for Ulam distance is almost optimal in the sense that (1) the approximation factor of our algorithm is $1+epsilon$1+ϵ, (2) the round complexity of our...