Sharif Digital Repository

The proliferating utilization of electric drones across diverse operational domains necessitates frequent recharging of these aerial vehicles, imposing a substantial burden on the power distribution grid. This surge in demand exacerbates peak consumption levels within the distribution network, consequently leading to increased energy losses. Hence, there is an imperative need for a strategic management plan aimed at mitigating energy loss within the network. This study proposes an intelligent power management system tailored for efficiently handling the energy requirements of a large fleet of electric drones. Leveraging a mixed-integer nonlinear programming (MINLP) methodology, the proposed... 

The focus of the paper is on cross-layer transmission based on rateless coding for relay networks. In the proposed method, rateless coding is used at the packet level and a separate physical layer coding is used at the physical layer. As rateless codes are originally designed and optimized for erasure channels, using these codes at the physical layer can lead to significant performance degradation. The proposed scheme has the advantage of a cross-layer design which uses a rateless code at the packet level modeled by an erasure channel. Based on the analysis and simulation results provided in this paper, the cross-layer scheme results in earlier successful decoding at the destination  

In this paper a new least mean square (LMS) based adaptive weighting algorithm is proposed. It is appropriate for antenna array systems with moving targets and mobile applications. The essential goal of this algorithm is to reduce the complexity of weighting process and to decrease the time needed for adjusting the antenna radiation pattern. The main lobe of antenna will be adjusted in the direction of desired signal (main signal) and nulls pointed in the direction of undesired signals (interference signals). By predicting the relative velocity of source, the next location of the source will be estimated and the array weights will be determined using LMS algorithm before arriving to the new... 

Reducing the computational complexity as well as convergence time is the main task of adaptive antenna array processing. This article proposes an improved algorithm for estimating the weights of adaptive array elements based on Constant Modulus Algorithm (CMA). In this new type of algorithm, those weights that have higher effect on the radiation pattern will be estimated and antenna pattern will be adjusted by changing these weights. In this research, 3 new algorithms are proposed. By simulating these algorithms and comparing them with conventional full weight CMA, finally new algorithm that has a reduced complexity and an acceptable performance at different signal to noise ratios (SNRs) is... 

In order to restrain ferroresonance in coupling capacitor voltage transformers (CCVT), two kinds of ferroresonance suppression circuits (FSCs) , are proposed in this paper: the resonant type, the fastsaturation reactor type which are connected to secondary side of CCVTs. Frequency domain analyses, for voltage ratio magnitude, are carried out for CCVTs to obtain preferable FSC. Furthermore, using surge suppressors such as metal oxide varistors (MOV) to improve the performance of the FSCs is investigated. Time domain simulations demonstrate that ferroresonance can be cleared in few cycles in presence of FSCs. The Electromagnetic Transients Program (EMTP) is used for modeling and fine-tuning... 

In this article, a novel cooperative secondary voltage/frequency control considering time-varying delays and noises in fading channels is presented for an autonomous alternating current (AC) voltage sourced-based converter (VSC)-based microgrid (MG), including inverter-interfaced distributed generations (DGs). Fading phenomenon makes complex random fluctuations on the voltage and frequency of every DG received from its neighbor DGs. In multi-agent cooperative systems, in addition to the total additive noise and time-variant delay, a multiplicative complex random variable is considered to model the main received signal and its replicas due to multipath propagation. The proposed... 

In this research, multi-walled carbon nanotubes (MWCNTs) were modified by dendritic macromonomer. Herein, polyamidoamine with acrylamide end groups was incorporated on MWCNTs. Afterwards, poly(N-isopropylacrylamide), (PNIPAM), was grafted on polyamidoamine in a facile synthesis. Then, doxorubicin as anticancer drug was loaded on this nanocarrier. The drug release was studied at below and above the lower critical solution temperature of PNIPAM, (LCST 32 °C), 27 °C and 37 °C, respectively. At 37 °C (body temperature) the polymer shell dehydrated and the drug release increased. The profile of drug release was expressed by Higuchi's equation which indicated that the drug release mechanism was... 

This paper focuses on cross-layer transmission based on rateless coding for relay channels. In the proposed method, rateless coding is used at packet level and a separate physical layer coding is used at the physical layer. As rateless codes are originally designed and optimized for erasure channels, using these codes at the physical layer can lead to significant performance degradation. The proposed scheme has the advantage of a cross-layer design which uses a rateless code at the packet level modeled by an erasure channel. Based on the analysis and simulation results provided in this paper, there is an exact tradeoff between physical layer code rate and rateless code depth, and the optimum... 

Theoretical study of NH3(H2O) n=0,1,2,3 adsorption on (8, 0) carbon nanotube was performed at the X3LYP/6-31G* level of density functional theory (DFT). The tube-NH3 interaction was discussed in the terms of binding energy (EB), coupling energy (EC), charge density, molecular orbitals, and dipole moments. The results reveal that addition of water molecules to tube-NH3 system increases the interaction between tube and ammonia molecule  

In a MIMO (Multiple Input Multiple Output) radar system, proper design of transmit signal and receive filter is an advantageous tool to improve the detection performance. Thus, in this paper, we consider the problem of transmit code and receive filter design, in order to maximize the Signal to Noise Ratio (SNR) at the receiver while enforcing a similarity constraint between the transmit space-time code (STC) and a reference STC which has a desirable ambiguity function. We will show that by solving such constrained optimization problem through successive iterations, our proposed method leads to satisfactory results  

Weighting elements to achieve radiation patterns with desired characteristics is a classical work in phased array antennas. These characteristics can be low sidelobe level, narrow beamwidth, high directivity, pattern nulling in special angle and etc. For each of these characteristics, different methods have been introduced. Most of methods have been presented for uniform arrays, however there are lots of methods to obtain a desired pattern for antennas with non-uniform element distances. The problem with these methods is complexity or not very good results. In this paper, fast and easy methods based on Least Square Error that leads to good results are presented. In addition, weighting of... 

Distributed generation connected with AC, DC, or hybrid loads and energy storage systems is known as a microgrid. Campus microgrids are an important load type. A university campus microgrids, usually, contains distributed generation resources, energy storage, and electric vehicles. The main aim of the microgrid is to provide sustainable, economical energy, and a reliable system. The advanced energy management system (AEMS) provides a smooth energy flow to the microgrid. Over the last few years, many studies were carried out to review various aspects such as energy sustainability, demand response strategies, control systems, energy management systems with different types of optimization... 

This paper resolve the salinity-dependent interactions of polar components of crude oil at calcite-brine interface in atomic resolution. Molecular dynamics simulations carried out on the present study showed that ordered water monolayers develop immediate to a calcite substrate in contact with a saline solution. Carboxylic compounds, herein represented by benzoic acid (BA), penetrate into those hydration layers and directly linking to the calcite surface. Through a mechanism termed screening effect, development of hydrogen bonding between –COOH functional groups of BA and carbonate groups is inhibited by formation of a positively-charged Na+ layer over CaCO3 surface. Contrary to the common...