Loading...
Search for:
shariyat--mohammad
0.145 seconds
Total 5606 records
Bayesian Modeling of Road Surface Roughness Characteristics for Fatigue Damage Assessment
, M.Sc. Thesis Sharif University of Technology ; Adibnazari, Saeed (Supervisor) ; Shariyat, Mohammad (Supervisor)
Abstract
Road roughness-induced vibrations are the main source of fatigue damage accumulation in vehicles. Hence, road surface profile modeling and simulation are of high importance when it comes to vehicle fatigue damage assessment. This research focuses on uncovering the statistical distributions that describe the characteristics of road loads that affect fatigue damage accumulation. Particle filtering is deployed to estimate the log-volatility of the road surface profile by assuming a random walk behavior for the hidden log-volatility. The skew-normal distribution with three parameters is fitted to the estimated log-volatility. The inferred parameters are used for synthesizing artificial road...
Skew-normal log-volatility model of road surface profile
, Article Mechanical Systems and Signal Processing ; Volume 177 , 2022 ; 08883270 (ISSN) ; Adibnazari, S ; Shariyat, M ; Sharif University of Technology
Academic Press
2022
Abstract
Road roughness-induced vibrations are the main source of fatigue damage accumulation in vehicles. Hence, road surface profile modeling and simulation are of high importance when it comes to vehicle fatigue damage assessment. This research focuses on uncovering the statistical distributions that describe the characteristics of road loads that affect fatigue damage accumulation. Particle filtering is deployed to estimate the log-volatility of the road surface profile by assuming a random walk behavior for the hidden log-volatility. The skew-normal distribution with three parameters is fitted to the estimated log-volatility. The inferred parameters are used for synthesizing artificial road...
Two-dimensional modeling of functionally graded viscoelastic materials using a boundary element approach
, Article Advanced Materials Research, 7 January 2012 through 8 January 2012 ; Volume 463-464 , January , 2012 , Pages 570-574 ; 10226680 (ISSN) ; 9783037853634 (ISBN) ; Bahadori, M. R ; Shariyat, M ; Sharif University of Technology
2012
Abstract
In this paper, a 2D boundary element approach able to model viscoelastic functionally graded materials (FGM) is presented. A numerical implementation of the Somigliana identity for displacements is developed to solve 2D problems of exponentially graded elasticity. An FGM is an advanced material in which its composition changes gradually resulting in a corresponding change in properties of the material. The FGM concept can be applied to various materials for structural and functional uses. Our model needs only the Green's function of nonhomogeneous elastostatic problems with material properties that vary continuously along a given dimension. We consider the material properties to be an...
Modeling of viscoelastic solid polymers using a boundary element formulation with considering a body load
, Article Advanced Materials Research, 7 January 2012 through 8 January 2012 ; Volume 463-464 , January , 2012 , Pages 499-504 ; 10226680 (ISSN) ; 9783037853634 (ISBN) ; Bahadori, M. R ; Shariyat, M ; Sharif University of Technology
2012
Abstract
In this work, a boundary element formulation for 2D linear viscoelastic solid polymers subjected to body force of gravity has been presented. Structural analysis of solid polymers is one of the most important subjects in advanced engineering structures. From basic assumptions of the viscoelastic constitutive equations and the weighted residual techniques, a simple but effective boundary element formulation is implemented for standard linear solid (SLS) model. The SLS model provides an approximate representation of observed behavior of a real advanced polymer in its viscoelastic range. This approach avoids the use of relaxation functions and mathematical transformations, and it is able to...
Boundary integral equation analysis of an inhomogeneous medium made of functionally graded materials
, Article Advanced Materials Research ; Volume 685 , 2013 , Pages 285-289 ; 10226680 (ISSN) ; 9783037856765 (ISBN) ; Bahadori, M. R ; Keshmiri, H ; Shariyat, M ; Sharif University of Technology
2013
Abstract
The present work develops direct graded boundary integral equation formulation for behavior investigation of the inhomogeneous media made of functionally graded materials. The isoparametric boundary elements, the elastostatic governing equations and a weighted residual technique are implemented with the material characteristics that vary continuously along a given dimension. The resulting algorithm is capable of solving the quasistatic problems for elastic functionally graded media with a variety of the boundary conditions and loadings. The inhomogeneous media is made of a ceramic-metal mixture, in which the material properties vary continuously according to a power law graded distribution...
An FEM approach for three - Dimensional thermoviscoelastic stress analysis of orthotropic cylinders made of polymers
, Article Advanced Materials Research, Dubai ; Volume 685 , 2013 , Pages 295-299 ; 10226680 (ISSN) ; 9783037856765 (ISBN) ; Keshmiri, H ; Bahadori, M. R ; Shariyat, M ; Sharif University of Technology
2013
Abstract
The objective of this study is to develop a general finite element formulation associated with an incremental adaptive procedure which established for thermoviscoelastic stress analysis of orthotropic cylinders made of polymers. This paper concerned with development of a numerical algorithm for the solution of the quasistatic initial/boundary value problems involving the linear viscoelastic media with thermal and mechanical deformations. The viscoelastic constitutive equations, represented in an integral form and involving relaxation functions, are transformed into an incremental algebraic relation. An incremental relaxation is then developed for the finite element formulation to deal with...
Experimental accuracy assessment of various high-cycle fatigue criteria for a critical component with a complicated geometry and multi-input random non-proportional 3D stress components
, Article Engineering Failure Analysis ; Volume 90 , 2018 , Pages 534-553 ; 13506307 (ISSN) ; Farrahi, G. H ; Shariyat, M ; Ahmadian, M. T ; Sharif University of Technology
Elsevier Ltd
2018
Abstract
In the present paper, a steering knuckle of a passenger car that serves as a highly critical component from the safety point of view, is considered to evaluate accuracy some of categories of the multiaxial fatigue criteria, through comparing their predictions with the experimental results. This component is subjected to the highest road- and steering-induced random and non-proportional loads that are exerted on several points of the component. The mechanical properties and fatigue strengths are determined experimentally and the fatigue life assessment tests are performed by the authors. Quantometric analyses and scanning electron microscope (SEM) have been employed to detect the failure...
Construction of an Experimental Device for Foaming Agent and an Experimental Study of the Properties of Foaming Agent
, M.Sc. Thesis Sharif University of Technology ; Bazargan, Mohammad (Supervisor)
Abstract
The primary purpose of acidizing operations in the oil and gas industry is to enhance hydrocarbon production. Acidizing has been a common and conventional method for years, especially when production engineers face issues like declining reservoir pressure leading to reduced production rates. Initially, the treatment solution is referred to as matrix acidizing. In acidizing operations, different additives are combined with the acid to control its behavior in the reservoir. These additives may include iron control agents, corrosion inhibitors, friction reducers, and more. Incompatibility among these additives, the acid, and reservoir fluids can lead to severe damage to the reservoir....
Numerical Analysis of An Annular Gas Turbine Combustor
, M.Sc. Thesis Sharif University of Technology ; Farshchi, Mohammad (Supervisor)
Abstract
The goal of this research is the simulation of the annular combustion chamber of the turbine engine utilized by liquid fuel. The achievement to this goal will lead to create numerical tools for parametric study, analysis and combustion chamber designing.For this reason simple geometry has been considered. This simplicity of geometry causes to facilitate in parametric study and decrease in saving time for modeling and meshing. This combustion chamber is a simplified model of engine CF6. In recent study, the k – ε realizable model has been used for turbulence modeling. For non-adiabatic condition, chemical reaction is dissolved by utilizing probability density function along with laminar...
A misbehavior‐tolerant multipath routing protocol for wireless Ad hoc networks [electronic resource]
, Article International Journal of Research in Wireless Systems (IJRWS) ; Vol. 2, Issue 9, pp. , Sep. 2013 ; Pakravan, Mohammad Reza ; Aref, Mohammad Reza ; Sharif University of Technology
Abstract
Secure routing is a major key to service maintenance in ad hoc networks. Ad hoc nature exposes the network to several types of node misbehavior or attacks. As a result of the resource limitations in such networks nodes may have a tendency to behave selfishly. Selfish behavior can have drastic impacts on network performance. We have proposed a Misbehavior-Tolerant Multipath Routing protocol (MTMR) which detects and punishes all types of misbehavior such as selfish behavior, wormhole, sinkhole and grey-hole attacks. The protocol utilizes a proactive approach to enforce cooperation. In addition, it uses a novel data redirection method to mitigate the impact of node misbehavior on network...
Theoretical and Experimental Study to Conversion of AUC to UO2 by Microwave Heating
, Ph.D. Dissertation Sharif University of Technology ; Otukesh, Mohammad (Supervisor) ; Ghannadi Maragheh, Mohammad (Co-Advisor) ; Ghasemi, Mohammad Reza (Co-Advisor)SAR Imaging Using the TomoSAR Technique to Resolve Multiple Scatterers
, M.Sc. Thesis Sharif University of Technology ; Bastani, Mohammad Hassan (Supervisor) ; Karbasi, Mohammad (Co-Supervisor)
Abstract
During the last few years, the study of urban environment structures is considered as a research field of interest in remote sensing. In satellite observations of the earth's surface, continuous imaging in terms of time and space has caused the remote sensing technique to be proposed as a useful and efficient tool for the analysis of urban areas. Obtaining quantitative spatial information from the urban environment in fields such as determining the height of buildings plays an essential role in urban planning, monitoring damage to buildings, establishing communication bases and digital cities. During the last two decades, the use of Tomosar approach in order to reconstruct the structures of...
Estimating Possible Effects of Subsidies in Competition and Development of Fixed Broadband Internet
, M.Sc. Thesis Sharif University of Technology ; Vesal, Mohammad (Supervisor) ; Rahmati, Mohammad Hossein (Supervisor)
Abstract
In this work, the dynamic competition between firms providing internet services is studied. The framework is Markov equilibrium whereby structural parameters are obtained using two-step estimations, allowing for analyzing the situation in case of subsidies for service upgrade. The results show that such subsidy has little effect on the number of firms while increasing the number of fast firms
Estimating Price Elasticity of Natural Gas Demand in Iran's Residential Sector: A Regression Discontinuity Approach
, M.Sc. Thesis Sharif University of Technology ; Rahmati, Mohammad Hossein (Supervisor) ; Vesal, Mohammad (Supervisor)
Abstract
Estimating the price elasticity of gas demand involves complexities depending on the gas market structure and pricing mechanisms in different countries. Distinguishing between supply and demand shocks and block pricing are among the main challenges that can cause endogeneity in elasticity estimates. Iran's domestic gas network, one of the largest and most extensive household gas markets, is divided into five climatic zones based on weather conditions. The pricing steps for these five climates during the five cold months are such that a customer in a warmer climate pays higher prices. Conversely, the pricing steps for the seven warm months are the same for all climates. This policy creates a...
Estimate the Effect of Religiosity on Voter Turnout
, M.Sc. Thesis Sharif University of Technology ; Rahmati, Mohammad Hossein (Supervisor) ; Vesal, Mohammad (Supervisor)
Abstract
The correlation between religious adherence and voter turnout is widely studied. However, whether the relation is causal is an open question. We use Household Expenditures and Income Survey (HEIS) data in Iran, which encompasses nine distinct religious expenditures. These expenditures have low correlation with each other and represent different aspects of religious adherence. We use Imamzadeh (some historical holy shrines) as Instruments to estimate the causal effect of religious expenditures on voter turnout. The results reveal that religious expenditures influence both presidential and parliamentary voter turnout, with a notably stronger impact on presidential elections
Joint Optimization of Computation Offloading and Resource Allocation in Mobile Edge Computing Networks
, M.Sc. Thesis Sharif University of Technology ; Pakravan, Mohammad Reza (Supervisor) ; Hadi, Mohammad (Co-Supervisor)
Abstract
Mobile edge computing (MEC) is a promising technology that aims to resolve cloud computing’s issues by deploying computation resources at the edge of mobile network and in the proximity of users. The advantages of MEC include reduced latency, energy consumption, and load on access and mobile core networks, to name but a few. Despite all the aforementioned advantages, the mobility of mobile network users causes the traditional MEC architecture to suffer from several issues, such as decreased efficiency and frequent service interruption. One of the methods to manage users’ mobility is virtual machine (VM) migration, where the VM containing the user’s task is migrated to somewhere closer to...
Non-Scratch, Antibacterial And Self-cleaning SiO2/TiO2 Nano Composite Coating on Surgical Tools By Sol-Gel
, M.Sc. Thesis Sharif University of Technology ; Ghorbani, Mohammad (Supervisor)
Abstract
In this study TiO2/SiO2 thin films were prepared by sol-gel method from Tetra isopropylortho Titanate(TIPT) as the principle of TiO2 material with Tera ethoxysilane(TEOS) as the principle of SiO2 material to achieve high scratch-resistant , antibacterial and self-cleaning surface area under the effect of various percentage of SiO2 . Film deposition was carried out using a dip-coating technique and heat-treatment was used at 700ºC to achieve crystalline of films with excellent adherence the of substrate.
The surface morphology of the films has been observed by Scanning Electron Microscope (SEM) and the tribological properties of the surface were investigated by Atomic Force Microscope...
The surface morphology of the films has been observed by Scanning Electron Microscope (SEM) and the tribological properties of the surface were investigated by Atomic Force Microscope...
Simulation and Control of an Aromatic Extractive Distillation Column
,
M.Sc. Thesis
Sharif University of Technology
;
Shahrokhi, Mohammad
(Supervisor)
Abstract
In this study steady state and dynamic simulation of an NFM extractive distillation unit for seperation of aromatics and non-aromatic components has been carried out. Column output composition obtained with experimental binary coefficients is compared with those obtainded by UNIFAC equation. The results indicate that using UNIFAC for all binrary coefficients results in an unacceptable error in concentration of benzene. If the experimental binary coefficents of benzene with NFM are used and the rest are calculated by UNIFAC equation, the simulation results will be very close to those obtained via experimental binary coefficients. Also it is shown that considering a constant efficiency for all...
Investigation the Effects of Parking Pricing and Improving Public Transportation Policies on Private Car Use Reduction in Central Business District
, M.Sc. Thesis Sharif University of Technology ; Kermanshah, Mohammad (Supervisor)
Abstract
Nowadays, with population growth and vehicle traffic increase, only providing transportation supply couldn’t answer the transportation demand. One of the most important solutions to reduce traffic is transportation demand management (TDM). In this research, the effects of parking pricing and improving public transportation services on private car demand reduction in city center are examined. The data are collected from private cars users in the city center of Isfahan through interviews. By stated preference method, the impacts of parking price and public transit travel time and other related factors were investigated. For this purpose, binary logit, multinomial logit and nested logit models...
Iran’s Air Quality Modeling Using CMAQ-WRF Coupled Model
, M.Sc. Thesis Sharif University of Technology ; Arhami, Mohammad (Supervisor)
Abstract
Industrialization has brought about air pollution which is one of the most important factors threatening human health. The most efficient method to improve air quality include preventing the emission of pollutants by making laws and regulations. In order to set appropriate regulations, there needs to be a correct understanding of the problem. The purpose of this research is to identify such factors and create a correct understnding of the problem in Iran by constructing a Model of Iranian air qulity. The model used in this research, CMAQ is one of the most comprehensive and state of the art models in transport of pollutnts and chemical reactions in the atmosphere. The inputs into CMAQ...