Sharif Digital Repository

In this paper, using an analytical optimization method, optimum design of multi-layer compound cylinders with different materials in layers is investigated. For this purpose, considering Tresca criterion, maximum shear stress in each layer is minimized. At the optimum condition, the maximum shear stress at all layers occurs simultaneously. The general analytical relations for optimum dimension of layers, residual pressures and radial interferences are derived. The existence condition of the optimum solution is also investigated and the constraints for materials selection are derived too. It is shown that the allowable shear stress ratio of materials must be close to their geometric mean... 

In this paper, a nonlinear model reference adaptive impedance controller is proposed and tested. The controller provides asymptotic tracking of a reference impedance model for the robot end-effector in Cartesian coordinates applicable to rehabilitation robotics or any other human-robot interactions such as haptic systems. The controller uses the parameters of a desired stable reference model which is the target impedance for the robots end-effector. It also considers uncertainties in the model parameters of the robot. The asymptotic tracking is proven using Lyapunov stability theorem. Moreover, the adaptation law is proposed in joint space for reducing the complexity of its calculations;... 

In this paper, employing an analytical method, optimum design of multi-layer compound cylinders is investigated. To this end, considering Tresca criterion, maximum shear stress in each layer is minimized. Analytical relations for optimum values of a layer dimension, residual pressures and radial interferences are derived. A technique for shrink-fitting of layers is also proposed and relationships for radial interferences, residual pressures and required temperature differences during the shrink-fitting process are derived. Three different examples are presented to show the effectiveness of the proposed method. It is shown that increasing the number of layers makes shear stress distribution... 

A new nonlinear model reference adaptive impedance controller is presented for the control of robot manipulators with uncertainties in model parameters such as friction coefficients. This method provides asymptotic tracking of a reference impedance model for the robot end-effector in operational space which is more sensible for the patient compared to the joint space impedance used in previous works. The model uncertainties such as friction coefficients are compensated using an adaptation law. The asymptotic tracking of the reference impedance model is shown using a Lyapunov function. The tracking performance and friction compensation are also demonstrated through simulation on a... 

Nowadays networks-on-chip are emerging as a hot topic in IC designs with high integration. In addition to popular mesh and torus topologies, other structures can also be considered especially in 3D VLSI design. The shuffle-exchange topology is one of the popular interconnection architectures for multiprocessors due to its scalability and self-routing capability. By vertically stacking two or more silicon wafers, connected with a high-density and high-speed interconnect, it is now possible to combine multiple active device layers within a single IC. In this paper we propose an efficient three dimensional layout for a novel 2D mesh structure based on the shuffle-exchange topology. Simulation... 

This research looked into how well the water-based intumescent coating (WBIC) with fumed silica nanoparticles (FSNs) worked to keep steel parts safe from cellulose fire. The adhesion strength of the coatings was evaluated using the pull-off test according to ASTM D4541. Flame retardant performance was studied by a lab-scale simulated big panel test at 950 °C for 1 hour. Thermogravimetric analysis (TGA) and the UL94 test were used to study the thermal stability and burning characteristics of the WBIC. An FESEM, an X-ray diffraction (XRD), and a Fourier transform infrared spectroscopy (FTIR) analysis were used to fully characterize the residual chars of the optimized formulation and the... 

Needle insertion simulation and planning systems (SPSs) will play an important role in diminishing inappropriate insertions into soft tissues and resultant complications. Difficulties in SPS development are due in large part to the computational requirements of the extensive calculations in finite element (FE) models of tissue. For clinical feasibility, the computational speed of SPSs must be improved. At the same time, a realistic model of tissue properties that reflects large and velocity-dependent deformations must be employed. The purpose of this study is to address the aforementioned difficulties by presenting a cost-effective SPS platform for needle insertions into the liver. The study... 

In this paper, an indirect adaptive fuzzy sliding mode controller for a 3-dimensional inverted pendulum as a fully actuated MIMO system is developed. This inverted pendulum, has four degrees of freedom and equations of the system are nonlinear and non-minimum phase. Thus, control of this system is a challenging issue. Accordingly, in this work, general basis of sliding mode control method with reaching rules is expressed for this system, then the fuzzy control theory is combined, and modeling uncertainties of the system are estimated by universal fuzzy approximation theory. Controller parameters are updated by a defined adaptation law to decrease the tracking error of the inverted pendulum.... 

Using passenger cars for daily traveling include advantages and disadvantages simultaneously; this daily traveling causes variety of road excitations in the form of vibration with different amplitude and acceleration to be imposed on body. Exceeding the standard limitations of these parameters results in fatigue, restlessness, and health problems. In this paper, a quarter-car model with semi-active suspension system is considered and three control approaches are applied to reduce these parameters in the limit of standard. Results show adaptive fuzzy optimal controller has better performance compared to others in controlling the critical health parameters, and can be easily used in future... 

Advent of passenger cars has caused people to use them for more efficiency in their performance and wasting less time. Problems, however, still exist in them. For instance, since people travel with cars, their human bodies undergo in fatigue, restlessness, and sometimes health problems. Human body reaction under external vibration depends on the amplitude, frequency, and acceleration of the applied external excitation. These limitations which are usually announced by the bureau of standards imply the necessity of control of amplitude, vibration, frequency, and acceleration received by human body due to cars passing humps and bumps. In this paper, a quarter car model with active suspension... 

A solvent-free procedure for the synthesis of several 1-aryl-2-(dialkylaminomethyl)-prop-2-en-1-ones 3 (a-e) and 4 (a-e) is reported. Reaction of arylmethyl ketones with formaldehyde and dialkylamines, such as diethyl- or dibutylamines at room temperature in silica gel produce 3 and 4 with moderate yields  

In this paper, we study a variation of the equations of a chemotaxis kinetic model and investigate it in one dimension. In fact, we use fractional diffusion for the chemoattractant in the Othmar-Dunbar-Alt system (Othmer in J Math Biol 26(3):263-298, 1988). This version was exhibited in Calvez in Amer Math Soc, pp 45-62, 2007 for the macroscopic well-known Keller-Segel model in all space dimensions. These two macroscopic and kinetic models are related as mentioned in Bournaveas, Ann Inst H Poincaré Anal Non Linéaire, 26(5):1871-1895, 2009, Chalub, Math Models Methods Appl Sci, 16(7 suppl):1173-1197, 2006, Chalub, Monatsh Math, 142(1-2):123-141, 2004, Chalub, Port Math (NS), 63(2):227-250,... 

The electromagnetic wave propagation prediction in smooth homogenous earth is studied. This estimation employs Fourier Split-Step algorithm. The process of how parabolic equation and Fourier Split Step algorithm achieved, is investigated. Error resulted from this approximation is studied. Source modeling is analyzed. Simulations based on this method are illustrated on different values of frequency, range and antenna height  

In this study, the corrosion behaviour of Ni-Co alloys with low Co content, electroplated on steel substrate in sulphate bath, was investigated. The morphology of coatings was studied by optical and SEM microscopy. The corrosion products were analyzed using EDX. The results showed that Ni-1%Co coatings had a better corrosion resistance 0.30, 0.92 and 3.75 mpy for atmospheric, salt spray and polarization tests, respectively. These are 0.41, 1.20 and 5.40 mpy for pure nickel coatings that indicate the least corrosion resistance. Surface analysis revealed the presence of oxides, sulphides and chlorides in corrosion products  

The flight of unmanned aerial vehicles is often associated with model uncertainties, measurement noises, and environmental disturbances such as wind gust. To mitigate these challenges, the accurate estimation of states is vital. Moreover, the wind model and its parameters should also be estimated and compensated during the flight. In this paper, a multiple model filter is implemented for this purpose. To investigate the performance of the multiple model filter, three different models including constant wind, '1-cosine' model and wind shear model are considered. The multiple model filter utilizes three extended Kalman filter to simultaneously estimate the model of wind, the parameters of the... 

In this paper, a new nonlinear robust adaptive impedance controller is addressed for Unmanned Aerial Vehicles (UAVs) equipped with a robot manipulator that physically interacts with environment. A UAV equipped with a robot manipulator is a novel system that can perform different tasks instead of human being in dangerous and/or inaccessible environments. The objective of the proposed robust adaptive controller is control of the UAV and its robotic manipulators end-effector impedance in Cartesian space in order to have a stable physical interaction with environment. The proposed controller is robust against parametric uncertainties in the nonlinear dynamics model of the UAV and the robot... 

A new method for fabrication of silver nano-islands on glass fibers using a top-down process is introduced. A thin layer of silver chemically coated on the surface of the glass fibers evolves into silver islands by heat treatment. The effect of the concentration of the initial solution and the temperature were investigated. Segregation was more clearly observed for lower solution concentrations and higher temperatures. The temperature of 500 °C was found optimum where separated islands form. At higher temperatures, the coagulation and burial of silver islands occur. Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and diffused reflectance spectroscopy (DRS) were... 

In this paper, a nonlinear robust adaptive sliding mode control strategy is presented for the influenza epidemics in the presence of model uncertainties. The nonlinear epidemiological model of influenza with five state variables (the numbers of susceptible, exposed, infected, asymptomatic and recovered individuals) and two control inputs (vaccination and antiviral treatment) is considered. The objective of the proposed controller is decreasing the number of susceptible and infected humans to zero by tracking the desired scenarios. As a result of this decreasing, the number of exposed and asymptomatic individuals is also decreased and converged to the zero. Accordingly, it is shown that the... 

A new composite adaptive control strategy is developed for both of the reduction of cancer tumor volume and the online identification of tumor parameters during the drug delivery process in chemotherapy. This control strategy is developed for three different nonlinear mathematical cell-kill models of the cancer tumor including the log-kill hypothesis, Norton-Simon hypothesis and Emax hypothesis. All of these models are considered to have fully parametric uncertainties. The stability, tracking convergence and parameters identification convergence during the chemotherapy process are proved using the Lyapunov method. For the first time, the parameters identification of the uncertain... 

To have accurate control of a wind turbine, especially when facing wind loads, it is vital to model the dynamic behavior of the system accurately and select the controller parameters properly. To mitigate these challenges, here, an optimal model-based controller is utilized using particle swarm optimization to suppress the vibrations of the tower for an NREL 5 MW turbine in the presence of the turbulence wind. For this purpose, first, a discrete state-space model is derived for the wind turbine based on the finite difference method, and the validity of the model structure is verified with its analytical solution. Then, the structure of a model predictive controller is implemented on the...