Sharif Digital Repository

Bilateral PPG signals have been used for comparative study of two groups of healthy (free from any cardiovascular risk factors) and diabetic (as cardiovascular disease risk group) subjects in the age-matched range 40-50 years. The peripheral blood pulsations were recorded simultaneously from right and left index fingers for 90 s. Pulses have been modeled with the ARX440 model in the interval of 300 sample points with 100 sample points overlap between segments. Model parameters of three segments based on the highest fitness (higher than 80%) of modeled segments were retained for each subject. Subsequently, principal component analysis (PCA) was applied to the parameters of retained segments... 

The stability analysis of cantilevered curved microtubules in axons regarding various size elements and using the generalized differential quadrature method for solving equations is reported. The impacts of covering MAP Tau proteins along with cytoplasm are taken into account as the elastic medium. Curved cylindrical nanoshell considering thick wall is used to model the microtubules. The factor of length scale (l/R = 0.2) used in modified couple stress theory would result in more accuracy when it comes to comparison with experiments, while alternative theories presented in this paper provide less precise outcomes. Due to the reported precise results, at the lower value of the time-dependent... 

The stability analysis of cantilevered curved microtubules in axons regarding various size elements and using the generalized differential quadrature method for solving equations is reported. The impacts of covering MAP Tau proteins along with cytoplasm are taken into account as the elastic medium. Curved cylindrical nanoshell considering thick wall is used to model the microtubules. The factor of length scale (l/R = 0.2) used in modified couple stress theory would result in more accuracy when it comes to comparison with experiments, while alternative theories presented in this paper provide less precise outcomes. Due to the reported precise results, at the lower value of the time-dependent... 

The tension-only braced frames (TOBFs) are widely used as a lateral force resisting system (LFRS) in low-rise steel buildings due to their simplicity and economic advantage. However, the system has poor seismic energy dissipation capacity and pinched hysteresis behavior caused by early buckling of slender bracing members. The main concern in utilizing the TOBF system is the determination of appropriate performance factors for seismic design. A formalized approach to quantify the seismic performance factor (SPF) based on determining an acceptable margin of safety against collapse is introduced by FEMA P695. The methodology is applied in this paper to assess the SPFs of the TOBF systems. For... 

This paper investigates the behaviour of C-shaped and L-shaped angle shear connectors embedded in solid concrete slabs. An effective finite element model is proposed to simulate the push out tests of these shear connectors that encompass nonlinear material behaviour, large displacement and damage plasticity. The finite element models are validated against test results. Parametric studies using this nonlinear model are performed to investigate the variations in concrete strength and connector dimensions. The finite element analyses also confirm the test results that increasing the length of shear connector increases their shear strength proportionately. It is observed that the maximum stress... 

According to recent researches, angle shear connectors are appropriate to transfer longitudinal shear forces across the steel-concrete interface. Angle steel profile has been used in different positions as L-shaped or C-shaped shear connectors. The application of angle shear connectors in tilted positions is of interest in this study. This study investigates the behaviour of tilted-shaped angle shear connectors under monotonic loading using experimental push out tests. Eight push-out specimens are tested to investigate the effects of different angle parameters on the ultimate load capacity of connectors. Two different tilted angles of 112.5 and 135 degrees between the angle leg and steel... 

Abstract A system designer needs to estimate the behavior of a system interconnection based on different patterns of switching which happen around an interconnect. Two different scenarios are supposed to estimate the effect of interconnect issues on system performance. First, based on a normalization technique for decreasing the number of a transfer function variables, a definitive environment for one interconnect is considered and an optimized look-up-table for the wire time delay is generated. Using some sampling methods, fast accessible look-up-tables are proposed for CAD tools in very simple and small one. A 4×4×4 table for the wire delay is introduced which results in very fast... 

In this research an intelligent emotional learning controller, Takagi- Sugeno- Kang (TSK) is applied to govern the dynamics of a novel Ionic-Polymer Metal Composite (IPMC) actuated manipulator. Ionic-Polymer Metal Composites are active actuators that show very large deformation in existence of low applied voltage. In this research, a new IPMC actuator is considered and applied to a 2-dof miniature manipulator. This manipulator is designed for miniature tasks. The control system consists of a set of neurofuzzy controller whose parameters are adapted according to the emotional learning rules, and a critic with task to assess the present situation resulted from the applied control action in... 

This is a fundamental study on the nonlinear vibrations considering large amplitude in multi-sized hybrid Nano-composites (MHC) disk (MHCD) relying on nonlinear elastic media and located in an environment with gradually changed temperature feature. Carbon fibers (CF) or carbon nanotubes (CNTs) in the macro or nano sizes respectively are responsible for reinforcing the matrix. For prediction of the efficiency of the properties MHCD's modified Halpin-Tsai theory has been presented. The strain-displacement relation in multi-sized laminated disk's nonlinear dynamics through applying Von Karman nonlinear shell-theory and using third-order-shear-deformation-theory (TSDT) is determined. The energy... 

In this work, an exergy analysis is performed for the waste heat recovery section (WHRS) of the steam-natural gas reforming (SNGR) process as a major energy intensive process. Two alternate conditions are investigated to evaluate the required thermodynamic parameters: normal operating condition and increase of C2+ components in the process feed stream. At normal operating condition, the exergy efficiency of WHRS amounts to 0.58 while some 17.2 kJ energy is destructed for each mole of H2 produced. If heavier than methane components are increased in the feed up to 8.5 mole %, despite the increase of H2 production, the exergy efficiency decreases down to 0.54... 

Corrosion of steel rebars in concrete can reduce the durability of concrete structures in coastal environments. The corrosion rate of these concrete structures can be reduced by using suitable concrete additives and coating on rebars. This paper investigates the corrosion resistance of steel rebars by the addition of pozzolanic materials including fly ash, silica fume, polypropylene fibers, and industrial 2-dimethylaminoethanol (FerroGard 901) inhibitors to the concrete mixture. Three different types of rebars including mild steel rebar st37, and two stainless steel reinforcements, AISI 304 and AISI 316, were used. Various types of primer and coating including alkyd based primer, hot-dip... 

In this article, size-dependent vibrations and the stability of moving viscoelastic axially functionally graded (AFG) nanobeams were investigated numerically and analytically, aiming at the stability enhancement of translating nanosystems. Additionally, a parametric investigation is presented to elucidate the influence of various key factors such as axial gradation of the material, viscosity coecient, and nonlocal parameter on the stability boundaries of the system. Material characteristics of the system vary smoothly along the axial direction based on a power-law distribution function. Laplace transformation in conjunction with the Galerkin discretization scheme was implemented to obtain... 

In this article, vibration of viscoelastic axially functionally graded (AFG) moving Rayleigh and Euler-Bernoulli (EB) beams are investigated and compared, aiming at a performance improvement of translating systems. Additionally, a detailed study is performed to elucidate the influence of various factors, such as the rotary inertia factor and axial gradation of material on the stability borders of the system. The material properties of the beam are distributed linearly or exponentially in the longitudinal direction. The Galerkin procedure and eigenvalue analysis are adopted to acquire the natural frequencies, dynamic configuration, and instability thresholds of the system. Furthermore, an... 

The fabrication of ITO-capped WO3 nanowires associated with their bio-sensing properties in field-effect transistor diagnostics basis as a biosensor has been reported. The bio-sensing property for manipulated nanowires elucidated that the grown nanostructures were very sensitive to protein. The ITO-capped WO3 nanowires biosensor showed an intensive bio-sensing activity against reliable protein. Polylysine strongly charged bio-molecule was applied as model system to demonstrate the implementation of materialized biosensor. The employed sensing mechanism was ‘label-free’ and depended on bio-molecule’s intrinsic charge. For nanowires synthesis, the vapor–liquid–solid mechanism was used.... 

In this paper the field-effect transistor DNA biosensor for detecting hepatitis B virus (HBV) based on indium tin oxide nanowires (ITO NWs) in label free approach has been fabricated. Because of ITO nanowires intensive conductance and functional modified surface, the probe immobilization and target hybridization were increased strongly. The high resolution transmission electron microscopy (HRTEM) measurement showed that ITO nanowires were crystalline and less than 50 nm in diameter. The single-stranded hepatitis B virus DNA (SS-DNA) was immobilized as probe on the Au-modified nanowires. The DNA targets were measured in a linear concentration range from 1fM to 10 µM. The detection limit of... 

The vulnerability of concrete to sulfuric acid attack requires much attention in both design and maintenance. Taking the waste management approach into account, this study utilized coal waste (CW) as a partial replacement for fine and coarse aggregates. The use of CW as aggregate replacement materials in concrete is a novel topic. Regarding the literature, concrete mixtures with CW aggregates showed relatively similar strength properties to conventional concrete. However, the effects of aggressive environments on the concrete containing CW aggregate have not been addressed. Here, the effects of sulfuric acid attack on the key properties, such as split tensile strength (STS), compressive... 

This study investigates numerically the behavior of tilted angle shear connectors embedded in solid concrete slabs. Two different tilted angle connectors were used, titled angle with 112.5 and 135 degrees between the angle leg and steel beam flange. A nonlinear finite element model was developed to simulate and validate the experimental push-out tests. Parametric studies were performed to investigate the variations in concrete strength and connector's dimensions. The results indicate that the ultimate strength of a tilted angle shear connector is directly related to the square root of the concrete compressive strength. The effects of variations in the geometry of tilted angle connectors on... 

Mechanical shear connectors are commonly used to transfer longitudinal shear forces across the steel-concrete interface in composite beams. Steel pipe as a new shear connector is proposed in this research and its performance to achieve composite strength is investigated. Experimental monotonic push-out tests were carried out for this connector. Then, a nonlinear finite element model of the push-out specimens is developed and verified against test results. Further, the finite element model is used to investigate the effects of pipe thickness, length and diameter on the shear strength of the connectors. The ultimate strengths of these connectors are reported and their respective failure modes... 

In this paper, the stable and reproducible tellurium doped ZnO nanowires (Te-ZnO NWs) photodetector with intensive responsively is presented. The Te-ZnO NWs were fabricated by physical vapor deposition (PVD) growth mechanism. Field emission scanning electron microscope (FESEM) images showed that the fabricated nanowires were 50 nm in diameter and several microns in length. The high resolution transmission electron microscopy indicated that the synthesized nanowires were crystalline and their phase characterization was validated by the X-ray diffraction (XRD). The photoluminescence (PL) studies of these nanowires showed a strong photoluminescence (PL) emission peak in the green region. It was... 

The highly sensitive impedimetric biosensor in label free approach for hepatitis B virus DNA (HPV DNA) detection based on tellurium doped ZnO nanowires was fabricated. The NWs were grown by hybrid thin film oxidation in the physical vapor deposition (PVD) mechanism. The morphology characterization of the synthesized NWs was performed by field emission scanning electron microscopy (FESEM) and the images demonstrated that the diameter and the length of the materialized NWs were around 50 nm and several micrometers, respectively. The high-resolution transmission electron microscopy (HRTEM) image indicated that the fabricated NWs were crystalline and their phase characterization was validated by...