Sharif Digital Repository

The inventory system under consideration consists of one central warehouse and many identical retailers controlled by continuous review inventory policy ( R, Q). We assume independent Poisson demands with constant transportation times for the retailers and a constant lead time for replenishing orders from an external supplier for the warehouse. Unsatisfied demands are assumed to be lost in the retailers and unsatisfied retailer orders are backordered in the warehouse. We develop an approximate cost function to find optimal reorder points for given batch sizes in all installations and the related accuracy is assessed through simulation. © 2005 Elsevier B.V. All rights reserved  

Supply Chain Operations Reference (SCOR) model is developed and maintained by the Supply Chain Council (SCC). The model is a reference model which can be used to map, benchmark and improve the supply chain operations. SCOR model provides companies with a basic process modeling tool, an extensive benchmark database and defines a set of supply chain metrics. Mobarakeh Steel Company (located in Isfahan, Iran) initiated the project of studying and analyzing its supply chain performance based on the SCOR model. This paper explains the steps and the results of the project. Interviews with the managers and considering the documents on the four major subjects of planning, logistics, information flow... 

A new multi-objective intermodal hub-location-allocation problem is modeled in this paper in which both the origin and the destination hub facilities are modeled as an M/M/m queuing system. The problem is being formulated as a constrained bi-objective optimization model to minimize the total costs as well as minimizing the total system time. A small-size problem is solved on the GAMS software to validate the accuracy of the proposed model. As the problem becomes strictly NP-hard, an MOIWO algorithm with an efficient chromosome structure and a fuzzy dominance method is proposed to solve large-scale problems. Since there is no benchmark available in the literature, an NSGA-II and an NRGA are... 

A new multi-objective intermodal hub-location-allocation problem is modeled in this paper in which both the origin and the destination hub facilities are modeled as an M/M/m queuing system. The problem is being formulated as a constrained bi-objective optimization model to minimize the total costs as well as minimizing the total system time. A small-size problem is solved on the GAMS software to validate the accuracy of the proposed model. As the problem becomes strictly NP-hard, an MOIWO algorithm with an efficient chromosome structure and a fuzzy dominance method is proposed to solve large-scale problems. Since there is no benchmark available in the literature, an NSGA-II and an NRGA are... 

In the traditional agri-fresh food supply chain (AFSC), geographically dispersed small farmers transport their products individually to the market for sale. This leads to a higher transportation cost, which is the primary cause of farmers’ low profitability. This paper formulates a traditional product movement problem in AFSC. First, the aggregate product movement model is combined with the vehicle routing model to redesign an existing AFSC (the ETKA Company; the most extensive domestic agri-fresh food supply chain in Iran) based on the available data. For the four-echelon, multi-period supply chain under investigation, a mixed integer linear programming (MILP) model is developed for the... 

The correct name of the 3rd Author is presented in this paper. © 2021, Springer-Verlag GmbH Germany, part of Springer Nature  

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit... 

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only... 

One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared  

It has been shown that using multiple antennas in a radar system improves the performance considerably, since multiple target echoes are received from different aspect angles of the target. In this way, the target detection is improved. However, when using multiple antennas, some problems, such as designing the transmit signals, synchronization, etc. emerge that should be solved. One of such problems is the receiver placement. Receiver placement deals with choosing a proper position for the receive antenna in order to optimize the whole system's performance. In this paper, a receiver placement procedure based on improving the radar ambiguity function is proposed for the case of a multisite... 

By employing the MIMO (multiple-input-multiple-output) technology in radar, some new problems emerged, that, in order to benefit the MIMO gains in radar, it was necessary to solve them suitably. One of such obstacles is determining the positions of receive antennas in a MIMO radar system with widely separated antennas (WS MIMO radar), since it is shown that the antennas' positions affect the whole system's performance considerably. In this study, a proper receivers' positioning procedure is proposed. To do this end, four criteria are developed based on the proposed MIMO detector and the MIMO ambiguity function. The simulations verify that the proposed positioning procedure improves the... 

Phenols and alcohols are silylated with hexamethyldisilazane (HMDS) under microwave irradiation in solvent-free condition in good to excellent yields  

Carbon capture is crucial for mitigating climate change and achieving global emissions reduction targets. Among various technologies, absorption-based methods using aqueous solvents are among the most common and efficient, offering high capture rates and retrofit capabilities for existing industrial facilities. However, selecting the optimal solvent is challenging due to its direct impact on the performance, efficiency, and cost-effectiveness of the carbon capture process. This research introduces a novel multi-class classification methodology for solvent selection in carbon capture. Leveraging a dataset of 656 data points, including features such as temperature, pressure, molar ratio, and...