Loading...
Search for:
sedigh-zyiabari--s--a
0.138 seconds
Total 21828 records
Numerical investigation on the temperature dependence of the cylindrical-gate-all-arounD Si-NW-FET
, Article Modern Physics Letters B ; Volume 25, Issue 29 , 2011 , Pages 2269-2278 ; 02179849 (ISSN) ; Saghafi, K ; Faez, R ; Moravvej-Farshi, M. K ; Sharif University of Technology
2011
Abstract
We report the results of our numerical investigation on the temperature dependence of the characteristics of the cylindrical gate-all-around Si nanowire field effect transistor (Si-NW-FET). Assuming the effect of temperature on the energy band structure of Si just like the effect of strain, we simulate the transistor characteristics at various temperatures (50 K ≤ T ≤ 300 K). In this investigation, we demonstrate the temperature dependence of the transistor sub-threshold swing and the threshold voltage are both linear functions of the temperature, represented by 61.5 × (T/300) + 63.4 (mV/decade) and 220140 × (T/300-1) (mV). By calculating the IDS - T characteristics for VDS = 0.4 V and...
Estimation and stochastic control of nonlinear dynamic systems over the AWGN channel: application in tele-presence and tele-operation of autonomous vehicles
, Article IET Control Theory and Applications ; Volume 17, Issue 16 , 2023 , Pages 2111-2123 ; 17518644 (ISSN) ; Farhadi, A ; Khaki Sedigh, A ; Sharif University of Technology
John Wiley and Sons Inc
2023
Abstract
This paper is concerned with tele-presence and tele-operation of autonomous vehicles over the Additive White Gaussian Noise (AWGN) channel. This wireless communication channel is subject to transmission noise and transmission power constraint. An encoder, decoder and controller are proposed by implementing a novel linearization method for linearizing the nonlinear dynamic systems at operating points. For the linearized systems, the encoder, decoder and controller are implemented that were previously proposed for output tracking as well as stability of linear dynamic systems. Two novel linearization methods are proposed and their satisfactory performances are proved for output tracking as...
Dynamic Performance Simulation of a Turbofan Engine with Inlet Flow Distortion
, M.Sc. Thesis Sharif University of Technology ; Ghorbanian, Kaveh (Supervisor)
Abstract
Turbofan engines are widely employed as the propulsion unit in commercial aircrafts. Turbofan engines may experience inlet flow distortion during their operation which may alter the performance magnitude and stability of the engines. In this research, an object-oriented (modular) model for turbofan engine components is developed by using Simulink/Matlab. Through the integration of the 1D models and the related thermodynamic equations for the engine components, the engine design point is determined. The off-design performance matching across the different components is established by scaling the characteristics and incorporating matrix iteration method. The spool dynamics is used to simulate...
Modeling the Impact of Climatic Conditions on Geometric Variations of Railway Tracks: A Deep Learning Approach
, M.Sc. Thesis Sharif University of Technology ; Shafahi, Yousef (Supervisor)
Abstract
Climate conditions are one of the key factors influencing railway infrastructure, and future climate changes and the occurrence of extreme weather events increase the risks to the sustainability and performance of these infrastructures. In this study, the relationship between climate conditions and geometric degradation of railway tracks in Iran is investigated using deep learning models. Geometric data of railway tracks from the EM120 track recording machine over a 14-year period were combined with meteorological data including temperature, humidity, precipitation, and wind speed for all 19 railway regions in Iran (covering approximately 14,000 kilometers of track and 180 GB of data)....
Gold nanoparticles loaded into niosomes: A novel approach for enhanced antitumor activity against human ovarian cancer
, Article Advanced Powder Technology ; Volume 32, Issue 12 , 2021 , Pages 4711-4722 ; 09218831 (ISSN) ; Ferdowsian, S ; Hajrasouliha, S ; Kazempoor, R ; Mirzaie, A ; Sedigh Dakkali, M ; Akbarzadeh, I ; Mohammadmahdi Meybodi, S ; Mirghafouri, M ; Sharif University of Technology
Elsevier B.V
2021
Abstract
In the current study, gold nanoparticles (AuNPs) were prepared using the green synthesis method using Artemisia annua extract, loaded into niosomes, and investigated their cytotoxicity and apoptotic effects. To optimize the niosomal formulation containing AuNPs, the effects of surfactants: cholesterol molar ratio, Span 60: Tween 60 M ratio, and AuNP concentration (µg/mL) were investigated. After examining the drug release profile, mathematical models were assessed to predict release kinetic. The cytotoxicity of noisome encapsulated AuNPs and free AuNPs was evaluated against human ovarian cancer cell line (A2780) by MTT assay. The apoptotic/necrosis ratio was studied using flow cytometry as...
Two new methods for DNA splice site prediction based on neuro-fuzzy network and clustering
, Article Neural Computing and Applications ; Volume 23, Issue SUPPL1 , 2013 , Pages 407-414 ; 09410643 (ISSN) ; Manzuri Shalmani, M. T ; Khaki Sedigh, A ; Kia, M ; Sharif University of Technology
2013
Abstract
Nowadays, genetic disorders, like cancer and birth defects, are a great threat to human life. Since the first noticing of these types of diseases, many efforts have been made and researches performed in order to recognize them and find a cure for them. These disorders affect genes and they appear as abnormal traits in a genetic organism. In order to recognize abnormal genes, we need to predict splice sites in a DNA signal; then, we can process the genetic codes between two continuous splice sites and analyze the trait that it represents. In addition to abnormal genes and their consequent disorders, we can also identify other normal human traits like physical and mental features. So the...
Deriving the Cost Function and Optimal Boundaries for a Two-level Inventory System with Information Sharing and Identical Retailers
, M.Sc. Thesis Sharif University of Technology ; Haji, Rasoul (Supervisor)
Abstract
In this study we consider a two-level supply chain, with a supplier and a number of identical retailers, demand process is Poisson with random rate. All retailers apply (R,Q) policy with backorder case for their inventory control supplier fulfills the orders of retailers according to FIFO discipline. At any point of time the supplier has online information about inventory position of all retailers.
Whenever the inventory position of a retailer reaches to a fixed value (s) above its reorder point, the supplier orders a batch of size Q to an outside source with infinite capacity. Lead-time of each retailer is equal to the sum of a constant transportation time and a delay time which is...
Whenever the inventory position of a retailer reaches to a fixed value (s) above its reorder point, the supplier orders a batch of size Q to an outside source with infinite capacity. Lead-time of each retailer is equal to the sum of a constant transportation time and a delay time which is...
Activated layered manganese oxides with deposited nano-sized gold or silver as an efficient catalyst for epoxidation of olefins
, Article RSC Advances ; Volume 3, Issue 46 , 2013 , Pages 24069-24074 ; ISSN: 20462069 ; Amini, M ; Sedigh, D. J ; Rahimi, F ; Bagherzadeh, M ; Sharif University of Technology
2013
Abstract
Activated layered manganese oxides with deposited nano-sized gold or silver were synthesized and characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction spectrometry, atomic absorption spectroscopy and energy-dispersive X-ray mapping. Here, we report that Au or Ag nanoparticles deposited on layered Mn oxides improve the catalytic activity of the Mn oxides toward the epoxidation of olefins in the presence of H2O2 and NaHCO3
Mathematical study of probe arrangement and nanoparticle injection effects on heat transfer during cryosurgery
, Article Computers in Biology and Medicine ; Volume 66 , Nov , 2015 , Pages 113-119 ; 00104825 (ISSN) ; Ramazani S. A. A ; Nazemidashtarjandi, S ; Sharif University of Technology
Elsevier Ltd
2015
Abstract
Blood vessels, especially large vessels have a greater thermal effect on freezing tissue during cryosurgery. Vascular networks act as heat sources in tissue, and cause failure in cryosurgery and reappearance of cancer. The aim of this study is to numerically simulate the effect of probe location and multiprobe on heat transfer distribution. Furthermore, the effect of nanoparticles injection is studied. It is shown that the small probes location near large blood vessels could help to reduce the necessary time for tissue freezing. Nanoparticles injection shows that the thermal effect of blood vessel in tissue is improved. Using Au, Ag and diamond nanoparticles have the most growth of ice ball...
Mechanical, rheological and oxygen barrier properties of ethylene vinyl acetate/diamond nanocomposites for packaging applications
, Article Diamond and Related Materials ; Volume 99 , 2019 ; 09259635 (ISSN) ; Ramazani S. A., A ; Haddadi, S. A ; Kheradmand, A ; Sharif University of Technology
Elsevier Ltd
2019
Abstract
In this work, the effects of the surface-modified nanodiamond particles (NDs) on the barrier, rheological, mechanical and thermal properties of ethylene vinyl acetate (EVA) composites for the packaging applications were investigated. Fourier transform infrared spectroscopy, as well as thermal gravimetric analysis were employed to study the grafting of vinyltriethoxy silane (VTS) on the surface of NDs. Afterwards, EVA samples containing 0, 0.1, 0.5, 1, 1.5 and 2 wt% of surface-modified NDs were prepared by a two-stage process including the solution and injection processes. In order to evaluate the physicochemical, rheological, mechanical and thermal properties of the EVA/NDs samples, field...
Effect of bonding parameters on microstructure development during TGTLP bonding of Al7075 alloy
, Article Philosophical Magazine ; Vol. 94, issue. 11 , Mar , 2014 , pp. 1166-1176 ; ISSN: 14786435 ; Ekrami, A ; Farahany, S ; Jahangiri, A ; Sharif University of Technology
2014
Abstract
The effect of temperature, pressure and bonding time on microstructure of temperature gradient transient liquid phase (TGTLP) diffusion bonded Al7075 alloy using liquid gallium interlayer was investigated. The selected bonding method relies on using the minimum amount of liquid gallium on faying surfaces, using a very fast heating rate to reach the joining temperature and imposing a temperature gradient across the bond region. The microstructure of the diffusion bonded joints was evaluated by light optical microscopy, scanning electron microscopy and energy dispersive spectroscopy (EDS). Results show that by increasing the temperature, pressure and time of joining, a more uniform...
Unified modeling framework for dynamic analysis of a MEMS resonant biosensor
, Article 2024 6th Iranian International Conference on Microelectronics, IICM 2024 ; 2024 ; 979-833151137-1 (ISBN)
IEEE
2024
Abstract
Utilizing mathematical modeling is crucial in comprehending and foreseeing the actions of MEMS components, reducing time and expenses in their creation. Modeling and simulating MEMS structures and physical phenomena is difficult because of their complexity. The research goal is to suggest a comprehensive modeling framework using bond graph method for MEMS biosensors, enabling the prediction of device performance and validation of characteristics prior to manufacturing. Simulation results are in good agreement with the experimental investigation for both transient and steady state responses. This method allows for flexibility in system-level modeling by merging specific simulation outcomes to...
Kalman filter based packet loss replacement in presence of additive noise
, Article 2012 25th IEEE Canadian Conference on Electrical and Computer Engineering: Vision for a Greener Future, CCECE 2012 ; 2012 ; 9781467314336 (ISBN) ; Ghorshi, S ; Tahaei, A
2012
Abstract
A major problem in real-time packet-based communication systems, is misrouted or delayed packets which results in degraded perceived voice quality. If packets are not available on time, the packets are considered as lost. The easiest solution in a network terminal receiver is to replace silence for the duration of lost speech segments. In a high quality communication system, to avoid degradation in speech quality due to packet loss, a suitable method or algorithm is needed to replace the missing segments of speech. In this paper, we introduce an adaptive filter for replacement of lost speech segment. In this method Kalman filter as a state-space based method will be used to predict the...
Effect of reactive diluent on gas separation behavior of photocurable acrylated polyurethane composite membranes
, Article Journal of Applied Polymer Science ; Volume 137, Issue 3 , 15 January , 2020 ; Shojaei, A ; Mousavi, S. A ; Ahmadi, S. A ; Sharif University of Technology
John Wiley and Sons Inc
2020
Abstract
In this study, the effects of the type and content of reactive diluents on the permeation/separation of carbon dioxide/nitrogen (CO2/N2) through acrylate-terminated polyurethane (APU)-acrylate/acrylic diluent (APUA) composite membranes was investigated. A series of APUs based on poly(ethylene glycol) (PEG)-1000 g mol−1, toluene diisocyanate, and 2-hydroxyethyl methacrylate was synthesized and then diluted with several reactive diluents. The results obtained from differential scanning calorimetry (DSC) and Fourier transform infrared analyses showed that the microphase interference of hard and soft segments increased with increasing reactive diluent content. Furthermore, with increasing alkene...
Study of thermal behavior of α-PbO2, using TG and DSC
, Article Journal of Thermal Analysis and Calorimetry ; Volume 92, Issue 3 , 2008 , Pages 917-920 ; 13886150 (ISSN) ; Alamolhoda, A. A ; Hashemian, S. J ; Sharif University of Technology
2008
Abstract
Using two techniques of thermogravimetry and differential scanning calorimetry under O2 gas atmosphere from 25 to 600°C, the thermal behavior of laboratory-produced compound lead(IV) oxide α-PbO2 was investigated. The identity of products at different stages were confirmed by XRD technique. Both techniques produced similar results supporting the same decomposition stages for the compound. Three distinct energy changes were observed, namely, two endothermic and one exothermic in DSC. The amount of ΔH for each peak is also reported. © 2008 Springer Science+Business Media, LLC
Thermal behavior of alkaline lead acetate, a study of thermogravimetry and differential scanning calorimetry
, Article Scientia Iranica ; Volume 15, Issue 4 , 2008 , Pages 435-439 ; 10263098 (ISSN) ; Alamolhoda, A. A ; Hashemian, S. J ; Sharif University of Technology
Sharif University of Technology
2008
Abstract
The compound, alkaline lead acetate, Pb(CH3COO)2·PbO·H2O (ALA), was purchased from the Fluka Company. The X-ray diffraction film and SEM electron microgaph of this compound were obtained and reported in this paper for the first time. The thermal behavior of alkaline lead acetate (ALA) was studied using thermogravimetery (TGA) and Differential Scanning Calorimetery (DSC) techniques under an O2 gas atmosphere from 25 to 600°C. Four distinct energy changes associated with weight changes were observed, all of them being exothermic in the DSC results. The amount of ΔH for each peak is reported. © Sharif University of Technology
An investigation into the structure and thermal properties of lead hydroxide
, Article Scientia Iranica ; Volume 14, Issue 2 , 2007 , Pages 169-173 ; 10263098 (ISSN) ; Alamolhoda, A. A ; Hashemian, S. J ; Sharif University of Technology
Sharif University of Technology
2007
Abstract
The compound, lead hydroxide Pb6O4(OH)4, was prepared by a method used for the first time in the authors laboratory. The compound was identified by XRD and it's purity was determined by analytical methods (100%). The thermal characteristics of this compound were investigated by using a thermogravimetry (TGA). This compound was found to be stable at room temperature and at 160°C will decompose completely to produce lead (II) oxide. © Sharif University of Technology, April 2007
Mechanical and piezoelectric characterizations of electrospun PVDF-nanosilica fibrous scaffolds for biomedical applications
, Article 2017 INN International Conference/Workshop on Nanotechnology and Nanomedicine, NTNM 2017, 2 May 2017 through 3 May 2017 ; Volume 5, Issue 7 , 2018 , Pages 15710-15716 ; 22147853 (ISSN) ; Ghaderi, S ; Amini, M ; Ramazani, S. A. A ; Sharif University of Technology
Elsevier Ltd
2018
Abstract
The effects of hydrophilic and hydrophobic nanosilica (SiO2) on the morphology, mean diameter distribution of fibers, mechanical and piezoelectric properties of poly (vinylidene fluoride) (PVDF) nanofibers were studies. We prepared Nanofibers by the electrospinning of PVDF solutions containing 1.5 wt.% both hydrophilic and hydrophobic nano-SiO2 loadings. Morphology and diameter distribution of the electrospun nanofibers were studied using field emission scanning electron microscopy (FE-SEM) analysis. Tensile test was used to study the effect of both types of nanosilica on the tensile strength, young's modulus and strain at break. Piezoelectric characterization of the electrospun fibers were...
Determining of the optimized dimensions of the Marinelli beaker containing source with inhomogeneous emission rate by using genetic algorithm coupled with MCNP and determining distribution type by neural networks
, Article Applied Radiation and Isotopes ; Volume 157 , 2020 ; Hosseini, S. A ; Feghhi, S. A ; Samadfam, M ; Sharif University of Technology
Elsevier Ltd
2020
Abstract
In order to determine the activity of C137s in soil resulting from nuclear accidents or fallouts, the best choice is to use HPGe detectors due to their best energy resolutions. In this regard, in order to enhance the detection efficiency, the Marinelli beakers have been used to increase the radiation interaction with the sensitive volume of the detector. In previous works, to optimize the dimension of Marinelli beakers, the assumption was that the emission rate of the source is homogeneous in beaker volume. In the present study, to investigate the effect of the inhomogeneous emission rate of the source on the optimum dimensions of the beaker, in a simple case, the beaker was divided into two...
Fabrication and characterization of a polysulfone-graphene oxide nanocomposite membrane for arsenate rejection from water
, Article Journal of Environmental Health Science and Engineering ; Volume 13, Issue 1 , 2015 ; 2052336X (ISSN) ; Nasseri, S ; Mahvi, A. H ; Nabizadeh, R ; Mousavi, S. A ; Rashidi, A ; Jafari, A ; Nazmara, S ; Sharif University of Technology
BioMed Central Ltd
2015
Abstract
Background: Nowadays, study and application of modified membranes for water treatment have been considered significantly. The aim of this study was to prepare and characterize a polysulfone (PSF)/graphene oxide (GO) nanocomposite membrane and to evaluate for arsenate rejection from water. Materials and methods: The nanocomposite PSF/GO membrane was fabricated using wet phase inversion method. The effect of GO on the synthesized membrane morphology and hydrophilicity was studied by using FE-SEM, AFM, contact angle, zeta potential, porosity and pore size tests. The membrane performance was also evaluated in terms of pure water flux and arsenate rejection. Results: ATR-FTIR confirmed the...