Sharif Digital Repository

Correlations between electrical and thermal conduction in polymer composites are blurred due to the complex contribution of charge and heat carriers at the nanoscale junctions of filler particles. Conflicting reports on the lack or existence of thermal percolation in polymer composites have made it the subject of great controversy for decades. Here, we develop a generalized percolation framework that describes both electrical and thermal conductivity within a remarkably wide range of filler-to-matrix conductivity ratios (Y f / Y m), covering 20 orders of magnitude. Our unified theory provides a genuine classification of electrical conductivity with typical Y f / Y m ≥ 10 10 as... 

In this paper a method for extracting keypoints from human brain MR images is proposed. These keypoints are obtained based on curved structures in the brain MR images. In this method, a keypoint is center of a circle which includes circular boundaries in the image and is selected based on gradients of the image. These keypoints and their descriptors are scale and rotation invariant. The proposed method is compared with other well-known methods with repeatability measure and ROC curves. Experimental results show that proposed method performs better than other well-known methods, specially, when deformations are remarkable  

Time-frequency and time-scale transforms are one of the powerful mathematical methods for feature extraction of non-stationary signals such as partial discharge (PD) signals. Modified Fourier-based transforms and Wavelet transforms are well known among them. PD signals can be analyzed by these influential methods but normally with some serious limitations and inadequacies. This paper proposes a new approach based on Wavelet-Hilbert transform for the analysis of electrical PD signals. The mathematical model of a Wavelet-Hilbert transform is described. Contemplating of natural behavior of PD, that is, stochastic and non-stationary an artificial multi-source of PD is simulated in a Detail model... 

The excessive exploitation of fossil resources has induced climate change and consequently water scarcity, which jeopardizes agriculture and the sustainable development of regions. The main objective of this study is to establish a synergy among various components of the nexus model, planning, and policy-making to address the water scarcity crisis and its adverse implications for ensuring the availability and sustainable management of water and employment growth in a region based on the regional constraints. This study develops a water-energy-food-waste nexus model that incorporates data on renewable energy potential, wastewater treatment, and specifically herbal plant cultivation, to... 

Recent developments of superconductive industries require cryocoolers with cooling power higher than 1 W in the 70-80 K temperature range. High capacity pulse tube cryocoolers assure the cooling power required for operation of superconducting devices. This paper presents numerical simulation of a high capacity pulse tube cryocooler, intended to provide more than 200 W cooling power at 80 K. In this respect the behavior of the cryocooler is explained by applying the mass and energy balance equations to different components of the cryocooler. Nodal analysis technique is employed to simulate the tube section behavior numerically. To perform the system optimization the influence of key operating... 

Abstract We report the well-controlled preparation of WS2 nanosheets-CdS nanoparticle heterojunction for photoelectrochemical (PEC) water splitting application. The WS2 nanosheets with an average thickness of ~5 nm and lateral dimensions of ~200 nm were synthesized via liquid phase exfoliation of bulk WS2 in water/ethanol solution, followed by deposition onto ITO substrate via electrophoretic method. CdS nanoparticles were grown via facile successive ion layer absorption and reaction (SILAR) method. Using these two well-controlled methods, CdS/WS2/ITO and WS2/CdS/ITO systems were fabricated. The loading of WS2 nanosheets was... 

In the present study, the potential of doxorubicin hydrochloride (DOX)-loaded electrospun chitosan/cobalt ferrite/titanium oxide nanofibers was studied to investigate the simultaneous effect of hyperthermia and chemotherapy against melanoma cancer B16F10 cell lines. The cobalt ferrite nanoparticles were synthesized via microwave heating method. The titanium oxide nanoparticles were mixed with cobalt ferrite to control the temperature rise. The synthesized nanoparticles and nanofibers were characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and vibrating sample magnetometer (VSM) analysis. The DOX loading efficiency and in vitro drug release of... 

We have used molecular dynamics simulation to investigate hydrophilic– hydrophobic interfaces between calcium chloride (CaCl2) aqueous solutions and normal hexane. The results demonstrate the increasing impact of salt concentration on the liquid–liquid interfacial tension, hence, negative adsorption of CaCl2 according to Gibbs adsorption isotherm. Moreover, we calculated the density profiles of hexane, water, and the counter ions. The results reveal an electrical double layer near the interface and the less affinity of calcium cations toward the interface than that of chloride anions. Orientation of water molecules at the studied concentrations may result in developing a positively charged... 

Estate administration involves managing and distributing a deceased individual’s assets to beneficiaries, as well as managing the liabilities. This process comprises legal, financial, and administrative tasks that ensure assets are transferred based on the deceased's wishes and in accordance with the law. In Southeast Asia countries such as Indonesia, Malaysia and Brunei where Muslims represents the majority of population, the Islamic law plays an integral part in the inheritance management as the process to be in line with the Islamic teachings and principle. The role of the syariah authority namely the syariah courts is prevalent and therefore, abidance to the rule under the syariah legal... 

A novel intelligent semi-active control system for an eleven degrees of freedom passenger car's suspension system using magnetorheological (MR) damper with neuro-fuzzy (NF) control strategy to enhance desired suspension performance is proposed. In comparison with earlier studies, an improvement in problem modeling is made. The proposed method consists of two parts: a fuzzy control strategy to establish an efficient controller to improve ride comfort and road handling (RCH) and an inverse mapping model to estimate the force needed for a semi-active damper. The fuzzy logic rules are extracted based on Sugeno inference engine. The inverse mapping model is based on an artificial neural network... 

Using CNG as an additive for gasoline is a proper choice due to higher octane number of CNG enriched gasoline with respect to that of gasoline. As a result, it is possible to use gasoline with lower octane number in the engine. This would also mean the increase of compression ratio in SI engines resulting in higher performance and lower gasoline consumption. Over the years, the use of simulation codes to model the thermodynamic cycle of an internal combustion engine have developed tools for more efficient engine designs and fuel combustion. In this study, a thermodynamic cycle simulation of a conventional four-stroke spark-ignition engine has been developed. The model is used to study the... 

With the declining energy resources and increase of pollutant emissions, a great deal of efforts has been focused on the development of alternatives for fossil fuels. One of the promising alternative fuels to gasoline in the internal combustion engine is natural gas [1-5]. The application of natural gas in current internal combustion engines is realistic due to its many benefits. The higher thermal efficiency due to the higher octane value and lower exhaust emissions including CO2 as a result of the lower carbon to hydrogen ratio of the fuel are the two important feature of using CNG as an alternative fuel. It is well known that computer simulation codes are valuable economically as a cost... 

Gaining insight into possible vibratory responses of dynamical systems around their stable equilibria is an essential step, which must be taken before their design and application. The results of such a study can significantly help prevent instability in closed-loop stabilized systems by avoiding the excitation of the system in the neighborhood of its resonance. This paper investigates nonlinear oscillations of a rotary inverted pendulum (RIP) with a full-state feedback controller. Lagrange’s equations are employed to derive an accurate 2-DoF mathematical model, whose parameter values are extracted by both the measurement and 3D modeling of the real system components. Although the governing... 

A suction-controlled ring device has been developed to continuously measure the coefficient of lateral soil pressure in deformable unsaturated soil samples from the at-rest to the active condition under application of increasing vertical pressure and controlled matric suction. The device incorporates a thin aluminum specimen ring equipped with horizontal strain gages for recording the lateral soil strains. In addition, a sensor recording water volume changes is utilized to continuously monitor the degree of saturation of the soil sample during tests. The matric suction within the soil texture is controlled using the axis translation technique. In order to verify the performance of the ring... 

We introduce a new smooth, non-toxic, biocompatible method for cross-linking of gum tragacanth (GT), a polysaccharide of natural origin, in order to serve as a new supporting matrix for immobilization systems. The modified gum is used as a matrix for the catalysis of the conversion of benzyl penicillin to 6-aminopenicillanic acid (6-APA) by means of Escherichia coli ATCC11105 with penicillin G acylase (PGA) activity. The results show that GT beads can not only serve as a proper matrix for immobilization, but show enhanced hydrolysis rate and stability compared to other immobilization systems used for this reaction. This signifies the potential of GT as a biocompatible matrix for... 

The Class-E power amplifier has been widely studied and formulated in the literature. Although the majority of reported inductive coupling wireless power transfer (WPT) systems use a class-E power amplifier for driving the primary coil, still there is a lack of a comprehensive study on class-E circuit dedicated to WPT, providing a set of closed form design equations for proper class-E operation. This paper presents the required design equations needed to design a 'true' class-E circuit for WPT applications. Equations for the series-tuned secondary coil WPT system are presented, as well as two different design procedures for the parallel-tuned secondary coil. The derived equations have been... 

Pole Side Impact Tes is one out of three crash tests described by Euro NCAP standard for star rating of a vehicle and is required for assessing the Adult Occupant Protection. In this paper the goal is to determine the crashworthiness of side doors and B pillar in a Pole Side Impact Test based on Euro New Car Assessment Program (Euro-NCAP) using computer and simulation method. In this matter, a vehicle model has been prepared and meshed using Hypermesh and CATIA. The velocity of 29 km/h has been assigned to the vehicle which was on top of a cart while the pole has been assigned as a rigid static object based on Euro NCAP requirements specifically. Results show that different amounts of energy... 

To assess a car under the Euro New Car Assessment Program (Euro-NCAP), Adult Occupant Protection is one out of three parameters which need to be calculated with a weight factor of 50% while the other parameters, Child Occupant Protection and Pedestrian Occupant Protection, have a weight factor of 20%. The Pole Side Impact Test, beside two other tests, Side and Front Impact, is also required to calculate the Adult Occupant Protection. It shows how important the Pole Side Impact Test is and what an effective role it has in the car rating assessment. In this paper, the objective is to evaluate the effect of thickness on the energy absorbed by the side doors and the B pillar and its... 

In Euro NCAP standard, adult protection is one of the most important rating scores with 50% weight factor while child protection and pedestrian protection are accounted into consideration with 20% weight factor. For adult protection testing, three tests are required to perform: (1) side impact, (2) pole impact, (3) front impact. In the side impact test, dummy's head, chest, shoulder, thorax, ribs, abdomen, pelvic and femur must be studied to evaluate the rating score. Crashworthiness of a car during side impact can describe the score rated for that car. In this paper the goal is to determine the crashworthiness of side doors and B-pillar in side impact crash est by simulation using LS DYNA...