Sharif Digital Repository

In this work, softening kinetics after cold rolling has been simulated using a coupled finite element-cellular automata model. Firstly, a two-dimensional rigid plastic finite element analysis has been developed to assess strain field and the stored energy accumulation during cold rolling as well as the initial condition of the mesoscopic model. Then, the cellular automata scheme has been employed to calculate the progress of static recrystallization at a given temperature while a dislocation-base model was simultaneously utilized to consider the effect of recovery on static softening process and final microstructures. The model has been examined on isothermal annealing of cold rolled AA5052... 

Cr and Cr-Al2O3 coatings were electrodeposited from Cr(III) bath with both pulsating and direct current onto copper substrates. Pulsating current resulted in homogeneous films of higher Al2O3 content and lower particle agglomeration than the direct current. Differences were more tangible at shorter duty cycles and pulse frequencies. Pulsating current improved both microhardness and corrosion resistance. The presence of alumina nanoparticles resulted in greater current efficiency, higher film microhardness and better corrosion resistance. Maximum current efficiency, highest microhardness and densest electrodeposited coatings were achieved at current density of 20 A dm-2, duty cycle of 40% and... 

Using 3-D scanned data to analyze and extract pore network plays a vital role in investigation of porous media's characteristics. In this paper, a new simple method is developed to detect pores and throats for analyzing the connectivity and permeability of the network. This automated method utilizes some of the common and well-known image processing functions which are widely accessible by researchers and this has led to an easy algorithm implementation. In this method, after polishing and quality control of images, using city-block distance function and watershed segmentation algorithm, pores and throats are detected and 3-D network is produced. This method can also be applied on 2-D images... 

The brain is one of the vital organs in the body. The main cerebral distribution center of blood flow in the brain is the circle of Willis (CoW). In more than 50% of healthy brains and in more than 80% of dysfunctional ones, at least one artery of the circle of Willis is absent or underdeveloped. These variations reduce the collateral flow availability and increase the risk of stroke and transient ischemic attack in patients with atherosclerosis. Thus it is essential to simulate the circle of Willis and investigate the effects of stenosis. In this work the systemic arteries along with the circle of Willis are simulated using the finite volume method and one-dimensional equations of... 

A one dimensional model of the pulmonary arterial network along with systemic circulation was introduced to quantify the human pulmonary artery hemodynamics. A lumped parameter model of the right ventricle was used as the inlet boundary condition. A time varying elastance related the volume and pressure of the right ventricle was imposed in the model. By using a four element Windkessel model, blood flow rate throughout the right ventricle was in hand. An asymmetric structured tree was chosen as the outlet boundary conditions. Simulation was based on solving one-dimensional equations of conservation of mass and momentum by using finite volume method. Blood flow rate, pressure and velocity... 

The effect of NaOH content of electrolyte on the properties of ceramic coatings, produced in silicate solution, was studied. Morphology, chemical analysis, phase composition, and cross-section of the ceramic coatings were investigated by SEM, EDS, XRD, and OM, respectively. The corrosion resistance and corrosion mechanism were also studied using potentiodynamic polarization and electrochemical impedance spectroscopy in a 3.5% NaCl solution. To study the surface roughness, a brightness SEM image analysis method was used. Results suggested that increasing the NaOH concentration of sediment production size causes thickness and coating roughness to decrease. The lowest corrosion rate belonged to... 

Direct discharge of high-strength industrial effluent often upsets municipal wastewater treatment plant processes. This pilot study was undertaken to evaluate the performance of a UASB system in pre-treating effluent from a medium-size traditional slaughterhouse. Experiments were conducted in a continuous flow 500-1 pilot plant initially inoculated with 200 1 municipal anaerobic digested sludge. With an influent COD concentration of 3000-5000 mg/l, the system was started with a loading of 1.8 kg COD/m3.d (F/M of 0.24 kg COD/kg VSS.d) at 25°C. The granules formed after 4 months of operation were dark brownish with a diameter of 1-4 mm and a settling velocity of 20 m/hr. Once granules were... 

In this paper, a three-dimensional numerical model is developed to analyze the influence of the Joule heating on flow characteristics of an electroosmotic flow through square cross section micro-channels. The governing system of equations consists of three sets of equations: electric potential distribution, flow-field and energy equations. The solution procedure involves three steps. The net charge distribution on the cross section of the micro-channel is computed by solving two-dimensional Poisson-Boltzmann equation using the finite element method. Then, using the computed fluid's charge distribution, the magnitude of the resulting body force due to interaction of an external electric field... 

Using of natural circulation concepts in nuclear and non-nuclear industry is very important. One of important methods in new designs of "innovative" fission reactor technologies is natural circulation scene. Natural circulation is based on buoyancy force; density differences between hot and cold legs including core and steam generators, and height of hot and cold zones. In this paper we studied natural circulation phenomena in two different heights of hot and cold zones by using of RELAP5 system code. Natural circulation Flow Map (NCFM) made for both cases and compared with experimental data. We have considered main components and systems of WWER-1000 plant in our model, such as pressure... 

The circulating fluid in natural circulation loops would absorb heat from the hot zone (source) and will transport it to the cold zone (sink) without using of any mechanical pumps or other devices. The fluid density differences in hot and cold zones would lead buoyancy force which is introduced as the body force for the loop. By introducing the one-dimensional conservation equations; mass, momentum and energy in the loop and applying the perturbation method, or linear stability theory, would help us to study the stability of the rectangular natural circulation loop. The conservation equations in transient form were solved using the finite difference method. The results obtained from the... 

For a graph G the Sombor index of G is defined as (Formula Presented) , where d(u) is the degree of u in G. In the current paper, we study the structure of a graph with minimum Sombor index among all graphs with fixed order and fixed size. It is shown that in every graph with minimum Sombor index the difference between minimum and maximum degrees is at most 1. © 2022 University of Kragujevac, Faculty of Science. All rights reserved  

The quality of service inWireless Multimedia Sensor Networks (WMSN) is related to packet loss rate. Recently different studies have been done on developing efficient protocols in the transport layer for controlling packet loss in WMSN. However, all of these protocols are independent of the characteristics of multimedia content. In this paper, a novel transport layer protocol, called User Datagram Dispatcher Protocol (UDDP), is proposed to minimize the packet loss ratio in WMSN by considering traffic characteristics, the inter-arrival pattern of packets and packet priority. UDDP is a new cross-layer transport layer that uses information of MAC and application layers to distribute packet... 

This paper presents the mathematical modeling of single-phase natural circulation of the University of Genoa's rectangular loop (LOOP#1) by a computer program and using RELAP5 system code. The mass, momentum and energy conservation equations in transient form were solved numerically using the finite difference method. One-dimensional linear stability analysis was performed for the single-phase natural circulation loop and the numerical perturbation technique was used in this analysis. The Nyquist criterion was employed to find the stability map of the LOOP#1. The obtained transient results using the first order upwind scheme of the fluid temperatures in various sectors of the LOOP#1 are... 

The proliferation of predatory or bogus journals has been recognized as a threat to academic research, and this study was conducted to discover the experiences of authors published in these journals. Eighty authors who had published in journals identified as predatory were surveyed. We asked how the authors learnt about these journals, what they thought about the reputation of the journals, their experiences of peer review and the quality of feedback provided, and whether publication was driven by PhD or job requirements. Our results showed that a third of authors discovered the journals by web searches or responding to email invitations. Over half said the reputation and name of the journal... 

In all light water reactors (LWR), natural circulation is an important passive heat removal mechanism. In the present paper, the natural circulation phenomena are studied with reference to step-wise coolant inventory reduction and a small break loss-of-coolant-accident (SBLOCA) in the cold leg of VVER-1000. The natural circulation flow map (NCFM) approach is considered to evaluate the natural circulation performance of the VVER-1000 NPP also comparing VVER-1000 and PWR systems. Three different elevations between heat source (core) and heat sink (steam generators) zones have been considered in order to characterize the buoyancy force in a VVER-1000. The influence of power and the cold legs... 

Industrial control systems are widely used in industrial sectors and critical infrastructures to monitor and control industrial processes. Recently, the security of industrial control systems has attracted a lot of attention, because these systems are now increasingly interacting with the Internet. Classic systems are suffering from many security problems and with the expansion of Internet connectivity, they are now exposed to new types of threats and cyber-attacks. Addressing this, intrusion detection technology is one of the most important security solutions that is used in industrial control systems to identify potential attacks and malicious activities. In this paper, we propose Stacked... 

Contrast induced nephropathy (CIN) has been reported to be the third foremost cause of acute renal failure. Metabolomics is a robust technique that has been used to identify potential biomarkers for the prediction of renal damage. We aim to analyze the serum and urine metabolites changes, before and after using contrast for coronary angiography, to determine if metabolomics can predict early development of CIN. 66 patients undergoing elective coronary angiography were eligible for enrollment. Urine and serum samples were collected prior to administration of CM and 72 h post procedure and analyzed by nuclear magnetic resonance. The significant differential metabolites between patients who... 

Due to low levels of observability and automation in active distribution networks (ADNs), the deployment of accurate measurement devices would be inevitable to increase the network observability. This work develops an optimal framework for phasor measurement unit (PMU) placement considering the accuracy of the distribution system state estimation (DSSE) process. In this regard, first, considering the significance of active power in supplying network loads, an active power sensitivity analysis is conducted in which the accuracy of active power injection at each bus is multiplied by its value of lost load. In this way, the accuracy of active power estimation could be transformed into a... 

The effect of equal channel angular pressing (ECAP) at different temperatures (room temperature, 120, 150 and 180 °C) on microstructure and mechanical properties of Al-7075 solid solution alloy was investigated. Microstructure of the specimens was examined using orientation imaging microscopy, transmission electron microscopy as well as X-ray diffractometer, and mechanical properties were measured by Vickers microhardness and tensile tests. Microstructural investigations showed that after 3 or 4 passes of ECAP, fine grains with average grain sizes in range of 300-1000 nm could be obtained at different ECAP temperatures. Increasing ECAP temperature from 120 to 180 °C caused a decrease in... 

For real-time embedded systems, energy consumption and reliability are two major design concerns. We consider the problem of minimizing the energy consumption of a set of periodic real-time applications when running on a multi-core system while satisfying given reliability targets. Multi-core platforms provide a good capability for task replication in order to achieve given reliability targets. However, careless task replication may lead to significant energy overhead. Therefore, to provide a given reliability level with a reduced energy overhead, the level of replication and also the voltage and frequency assigned to each task should be determined cautiously. The goal of this paper is to...