Sharif Digital Repository

The performance of OFDM-based Wireless Local Area Networks (WLANs) is investigated by employing different smart antenna techniques at the receiver. The use of multiple antennas at the Access Point (AP) receiver in IEEE802.11a standard-compliant Single Input Multiple Output (SIMO) configuration, improves the physical layer performance in different channel scenarios and interference that may arise from other stations sharing the same frequency band. For this purpose, a comparative study of smart antenna architectures for IEEE802.11a WLAN system using pre-FFT and post-FFT array processing techniques is presented. Simulations are performed on a new model for IEEE802.11a system using a... 

In this paper, we first propose a space-time-frequency (STF) coding method for multiple-input multiple-output orthogonal frequency division multiplexing (MIMOOFDM) transmission over frequency-selective fading channels and then, based on channel mean feedback model, we develop an adaptive MIMO-OFDM transmitter by applying an adaptive energy and bit loading scheme across OFDM subcarriers. Under the constraints of fixed transmit-energy and prescribed error performance, our objective is to maximize the transmission rate. Simulation results are presented which confirm the performance of our proposed system and show that under certain circumstances, the transmission rate improves considerably as... 

In this paper, the predictions of different beam theories for the behavior of a shape memory polymer (SMP) beam in different steps of a thermomechanical cycle are compared. Employing the equilibrium equations, the governing equations of the deflection of a SMP beam in the different steps of a thermomechanical cycle, for higher order beam theories (Timoshenko Beam Theory and von-Kármán Beam Theory), are developed. For the Timoshenko Beam Theory, a closed form analytical solution for various steps of the thermomechanical cycle is presented. The nonlinear governing equations in von-Kármán Beam theory are numerically solved. Results reveal that in the various beam length to beam thickness... 

Considerable interest in the indoor applications of wireless local-area networks (WLANs) demands some powerful simulation methods of these systems. Proper modeling of the physical propagation channel is crucial in this context. A novel simulation method for indoor wideband multi-input multi-output (MIMO) channel at the operating frequency band of IEEE 802.11a, HIPERLAN/2, and the emerging IEEE 802.11n standards is presented in this paper which is suitable for performance analysis of MIMO techniques in these systems. The presented model is developed on the basis of a previously proposed channel representation at the same frequency band. Simulation results for MIMO channel capacity are... 

Inspired by the requirement of proper link simulation methods in performance analysis of communication systems, we present in this paper a recipe for channel implementation in simulation environments. Our focus here is the indoor applications of wireless local-area networks (WLANs). Specifically, we describe a procedure that beginning with statistical description of the channel impulse response leads to an efficient multi-input multi-output (MIMO) channel simulating method for arbitrary antenna configurations at both ends. A sample set of distributions for model parameters are also provided at the 5-GHz band, which is the operating frequency band of IEEE 802.11a, HIPERLAN/2, and the emerging... 

Application of construction and demolition (C&D) wastes were considered as sustainable development goals (SDGs) for maintaining raw materials. Also, lightweight concretes such as aerated autoclaved concrete (AAC) were used for partitioning spaces in the building industry. Moreover, the waste products of the mentioned materials were increased due to the rise of old construction demolitions. This study contributes a calcinated aerated autoclaved concrete (CAAC) which is efficient, powerful, highly rapid, non-expensive and novel adsorbent for the removal of cationic dyes including malachite green (MG), methyl violet (MV) and methylene blue (MB) form water samples. The impacts of different... 

Application of construction and demolition (C&D) wastes were considered as sustainable development goals (SDGs) for maintaining raw materials. Also, lightweight concretes such as aerated autoclaved concrete (AAC) were used for partitioning spaces in the building industry. Moreover, the waste products of the mentioned materials were increased due to the rise of old construction demolitions. This study contributes a calcinated aerated autoclaved concrete (CAAC) which is efficient, powerful, highly rapid, non-expensive and novel adsorbent for the removal of cationic dyes including malachite green (MG), methyl violet (MV) and methylene blue (MB) form water samples. The impacts of different... 

This paper presents the influence of the severe shot peening process on the fatigue life of the laser-cladded Inconel 718 specimens which can be employed during refurbishment of components enduring high mechanical cyclic loads such as gas turbine components. In order to quantitatively evaluate the destructive effect of laser cladding on the fatigue endurance, fatigue tests are first performed on the as-received and laser-cladded specimens. Then, microstructural analysis by scanning electron microscope (SEM) is carried out to identify the root causes of the drawback of laser cladding. Moreover, by employing a comprehensive laser-cladding FE analysis considering cyclic plastic material... 

In this work effect of composition changes of injection gas, CH4 + CO2, on the performance of immiscible WAG injection in light oil, 41 oAPI, which has been rarely attended in the available literature is investigated. Presence of CO2 helps to reduce the MMP of CH4 significantly. Core flood experiments are conducted at reservoir conditions and fixed flow rate of 0.5cc/min on a sandstone sample with the brine concentration of 5000 ppm, and the influence of injection gas composition as well as WAG ratio on oil recovery is investigated. Different mole percents of methane in mixture, 0%, to 100% are examined, and the tests continued to ten alternate cycles with a slug size of 0.1 pore volumes and... 

Feeding a laboratory furnace with the gaseous kerosene, the resulting two-phase turbulent flame is simulated to study the effects of injecting soot nano-particles into the inflow air on the emissions of smoke aerosol, CO, and CO2species pollutants, and the resulting radiation heat transfer. We use our past experiences in aerosol modeling of soot nano/micro particles in turbulent nonpremixed flames burning simple hydrocarbon fuels and extend them to study the effects of injecting gaseous kerosene on the aforementioned parameters. To model the evolutionary process of soot nanoparticle formation, i.e., the nucleation, coagulation, surface growth, and oxidation, we employ a two-equation soot... 

Recently graph theory and complex networks have been widely used as a mean to model functionality of the brain. Among different neuroimaging techniques available for constructing the brain functional networks, electroencephalography (EEG) with its high temporal resolution is a useful instrument of the analysis of functional interdependencies between different brain regions. Alzheimer's disease (AD) is a neurodegenerative disease, which leads to substantial cognitive decline, and eventually, dementia in aged people. To achieve a deeper insight into the behavior of functional cerebral networks in AD, here we study their synchronizability in 17 newly diagnosed AD patients compared to 17 healthy... 

The inhibition effects of 3.5 bis (2-pyridil) 4-amino 1,2,4 triazole (NBTA) and 1-10 phenantrolin (PHEN), on corrosion of mild steel in acid solutions, (sulphuric acid and hydrochloric acid) were studied. The Tafel polarisation and ac impedance techniques were employed. Results obtained reveal that both compounds are relatively good inhibitors. The inhibition efficiencies of NBTA are higher in hydrochloric acid than in sulphuric acid. This has been attributed to the synergistic effect of chloride ions present in hydrochloric acid. The mechanism of inhibition of PHEN is believed to be owing to the formation of insoluble chelates between the organic molecules and atom/ion on the metal surface.... 

In this paper, a new fatigue lifetime prediction model is presented for the aluminium-silicon-magnesium alloy, A356.0. This model is based on the plastic strain energy density per cycle including two correction factors in order to consider the effect of the mean stress and the maximum temperature. The thermal term considers creep and oxidation damages in A356.0 alloy. To calibrate the model, isothermal fatigue and out-of-phase thermo-mechanical fatigue (TMF) tests were conducted on the A356.0 alloy. Results showed an improvement in predicting fatigue lifetimes by the present model in comparison with classical theories and also the plastic strain energy density (without any correction... 

The catalytic activity of potassium salts of phthalimide (PPI) and succinimide (PSI), as organonucleophilic catalysts, has been investigated for the cyclotrimerization of isocyanates under solvent-free conditions. PPI showed better catalytic activity in comparison with PSI. Diverse and challenging isocyanates afforded the respective symmetrical isocyanurates in good to quantitative yields in an atom economic reaction without any phase transfer catalyst. © 2005 Bentham Science Publishers Ltd  

Combination of sodium saccharin and tetrabutylammonium iodide as a novel anionic catalyst system promotes selectively the trimerization of isocyanates to give symmetrical isocyanurates under solvent-free conditions. © Springer-Verlag 2004  

The reliable transfer in Network on Chips (NoCs) can be threatened by crosstalk fault occurring in wires. Crossstalk fault is due to inter-wire coupling capacitance that based on the patterns of transitions appearing on the wires, significantly limits the reliability of NoCs. Among these transitions, 101 and 010 bit patterns impose the worst crosstalk effects to wires. This work intends to increase the reliability of NoCs against crosstalk faults by applying an improved Fibonacci-based numeral system, called Doubled-Penultimate Fibonacci (DP-Fibo). In the DP-Fibo coding algorithm, code words without ‘101’ and ‘010’ bit patterns are produced to reduce crosstalk faults. Experimental results... 

In this paper, a multiple metric learning scheme for human pose estimation from a single image is proposed. Here, we focused on a big challenge of this problem which is; different 3D poses might correspond to similar inputs. To address this ambiguity, some Euclidean distance based approaches use prior knowledge or pose model that can work properly, provided that the model parameters are being estimated accurately. In the proposed method, the manifold of data is divided into several clusters and then, we learn a new metric for each partition by utilizing not only input features, but also their corresponding poses. The manifold clustering allows the decomposition of multiple manifolds into a... 

Numerical simulations are performed to provide an in-depth insight into the effect of instabilities on liquid jets discharging from elliptical orifices. The axis-switching phenomenon and breakup are simulated and characterized under the effect of disturbances imposed at the nozzle exit. The simulations are based on the volume of fluid approach and an adaptive meshing. A range of orifice aspect ratios from 1 to 4 at the Rayleigh breakup regime is considered. The evolution of the jet cross section and axis switching under the influence of disturbances is compared with that of nonperturbed elliptical jets. It is found that the axis-switching repetition and breakup length exponentially decrease...