Sharif Digital Repository

In the endurance time (ET) method, structures are subjected to a specially designed intensifying ground acceleration function and their performance is judged based on their response at various excitation levels. A range of equivalent intensities can be covered in a single numerical or experimental simulation, thus significantly reducing the computational demand as compared to full nonlinear response-history analyses. The applied excitation intensity at various times has been correlated with those of the scaled ground motions. Response spectra of seven ground motions on stiff soil were used to produce intensifying acceleration functions that at each time window produce a response spectrum... 

During construction of one of the Sahand cooling towers due to slip forming performance some imperfections were raised mostly between elevation of +30 and +40 meter. It was evaluated that some points of the shell should be repaired. In constructing the cooling tower from elevation +40 to +60 meter these imperfections were removed and the cooling tower was constructed with no problem until the elevation +130 meter. In this paper reasons of generation of geometric imperfections in Sahand cooling tower are clearly shown and possible ways for preventing them are discussed. Applied repairing method for Sahand cooling tower is explained in detail. Geometrical imperfections of the constructed... 

The Endurance Time (ET) method is a new dynamic pushover procedure in which structures are subjected to gradually intensifying acceleration functions and their performance is assessed based on the length of the time interval that they can satisfy required performance objectives. In this paper, the accuracy of the Endurance Time method in estimating average deformation demands of low and medium rise steel frames using ETASOf series of ET acceleration functions has been investigated. The precision of the ET method in predicting the response of steel frames in nonlinear analysis is investigated by considering a simple set of moment-resisting frames. An elastic-perfectly-plastic material model... 

In Endurance Time (ET) method gradually intensifying acceleration functions are created in a manner that the linear and nonlinear response spectra of them, while being proportional to average of real earthquakes spectra, intensifies in a uniform manner with time. These functions are used as input functions for nonlinear time history analysis of structures and performance of structures is assessed based on the maximum time duration that they can meet the specified performance objectives. In this paper, application of the ET method in nonlinear seismic analysis of structures has been investigated. Numerical procedures and optimization techniques that are used for the production of acceleration... 

Incremental launching is a widespread bridge erection technique which may offer many advantages for bridge designers. Since internal forces of deck vary perpetually during construction stages, simulation and modeling of the bridge behavior, for each step of launching, are tedious and time consuming tasks. The problem becomes much more complicated in construction progression. Considering other load cases such as support settlements or temperature effects makes the problem more intricate. Therefore, modeling of construction stages entails a reliable, simple, economical and fast algorithmic solution. In this paper, a new Finite Element (FE) model for study on static behavior of bridges during... 

Submarine pipelines as the principal structural components are prone to fail by circumferential buckling under the effect of hydrostatic external pressure. Basically, the buckling capacity of a thin-walled pipe is dependent on "radius to thickness" ratio. At least two modes of local and overall buckling are possible in any pipeline system, which could be developed in pipe wall. A method of strengthening of pipes is developed in this paper to stop the failure. A total of 21 stiffened models are generated and analyzed using the well-known finite element program ABAQUS. In this study, the buckling and post-buckling behaviour of stiffened pipes are investigated by carrying out linear and... 

The aim of this paper is to analyze the Farsi-English statistical machine translation systems as a useful communication tool. Improvement of the nation's communication increases the need of easier way of translating between different languages in front of expensive human translators. In this work, a statistical phrase-based system is run on Farsi - English pair languages and the effect of its parameters on the translation quality has been deeply studied. Using BLEU as a metric of translation accuracy, the system achieves an improvement of 1.84%, relative to the baseline accuracy, which is increment from 16.97% to 18.81% in the best case  

Endurance Time (ET) method is a new dynamic analysis procedure that aims at estimating seismic performance of structures by subjecting them to predesigned intensifying acceleration. These acceleration functions are designed in a way that they approximately simulate earthquakes with different intensities through their duration. Performance of the structure is judged based on its behavior for different intensity measures through time. A set of three acceleration functions have been produced using the ET concept by applying optimization techniques. These acceleration functions are designed in such a way that their response spectrum, while complying with typical code design spectra, intensify... 

In this survey, the integration of a vapor compression cycle with a phase change material (PCM) storage tank has been evaluated experimentally during the hottest days of five cities with different weather conditions: Tehran, Ramsar Hamedan, Bushehr, and Ahvaz. The temperature conditions for outdoor (condenser, compressor, etc.) and indoor (evaporator) air conditioning units are provided with the help of two separated test chambers and a controller system. The desired system has been examined based on two scenarios. In each scenario, the system is assessed for the conventional air conditioning (AC) system (with no PCM involved) and the AC plus PCM unit. Based on scenario 1 operating strategy,... 

Endurance Time (ET) method has been introduced as a lime-history based dynamic analysis procedure. In this method, structures are subjected to a gradually intensifying acceleration function. Performance of the structures is assessed based on the length of the time interval that they can satisfy required performance objectives. In this study, some fundamental concepts of ET method are explained and the potentials and limitations of this procedure in nonlinear seismic analysis of SDOF structures are investigated. A numerical optimization procedure for generating ET acceleration functions that are compatible with ground motions are explained. Results of ET analysis for inelastic SDOF systems... 

A vapor-compression cooling system utilizing PCM is studied whereby the electricity consumption peak load is shifted. More specifically, the dynamic performance of the cooling system with and without PCM is evaluated and is presented with details on the hottest day of the year in Tehran, Iran. The proposed system uses the cooling energy to freeze or “discharge” the PCM during nighttime when the cooling load is minimally needed and uses the stored cooling energy during the peak load hours by melting or “charging” the PCM. This leads to better performance during the peak load hours when higher cooling loads are required. Oleic acid was chosen as PCM. The simulation was performed in EES... 

In this study, a vapor-compression cooling system utilizing different phase change materials (PCMs) has been studied whereby the electricity consumption peak load is shifted. More specifically, the dynamic performance of cooling systems with and without using PCM is evaluated for the hottest day of the year. The proposed system uses the cooling energy to freeze, or “discharge” the PCM during nighttime when the cooling load is minimally needed and uses the stored thermal energy during the peak load hours by melting, or “charging” the PCM. This leads to better performance during peak load hours when higher cooling loads are needed. Different PCMs including oleic acid, SP224A, CL, CaCl2·6H2O... 

In this work, the parametric study of a vapor compression refrigeration system integrated with a PCM storage tank for increasing the condenser sub-cooled temperature has been conducted based on the hottest day in Tehran city. The effects of various parameters such as comfort zone temperature, condenser and evaporator temperatures, and changes in heat transfer coefficient relative to the thickness of the ice formation in the PCM tank have been considered for simulating the desired system in the EES software. The focus of this study is to figure out the system's performance according to the changes in the effective parameters of the PCM storage tank. The results indicate that adding the PCM... 

In this study, the combination of a vapor compression cycle with a phase change material (PCM) storage tank has been assessed experimentally during the hottest day based on Tehran city climatic conditions. The temperature conditions for outdoor (condenser, compressor, etc.) and indoor (evaporator) air conditioning (AC) units are provided with the help of two separate test chambers and a controller system. The desired system has been surveyed based on two scenarios. In each scenario, the system is evaluated for the conventional AC system (with no PCM involved) and the AC plus PCM unit (conventional AC + PCM storage tank). Based on scenario 1 operating strategy, the results show that adding... 

In this study, a vapor compression refrigeration cycle integrated with a phase change material (PCM) storage tank has been dynamically simulated over a 24-h period. The primary objective of this system is to reduce electric energy consumption during on-peak hours (12:00–19:00) and shift it to off-peak hours (1:00–10:00). During off-peak hours, the vapor compression refrigeration system stores cooling energy in the PCM storage tank. The stored cooling energy is then reused during on-peak hours to pre-cool the condenser inlet refrigerant, enhancing the cooling system's performance and reducing electric consumption during on-peak hours. Oleic acid, eutectic mixtures of 45 % capric acid and 55 %... 

In this paper, a new control strategy and power management for a stand-alone PV/battery hybrid power system has been suggested. The solar cell arrays provide energy in the steady-state and the battery provides energy in transient states. Here, a charge controller system based on the MPP tracking technology, suitable for using in the islanded micro grid that contains a solar panel and a battery is designed. The charge controller includes a unidirectional DC-DC converter as an interface circuit between the solar panel and the DC bus, a bidirectional DC-DC converter as an interface circuit between the battery and the DC bus with a control system and power management in different states of... 

Depending on the type of dopant metal, many kinds of zircon based pigments are produced and blue vanadium pigment is the most important one of them. In this study, blue zircon ceramic pigments were synthesized from intermediate product, resulting from decomposition of zircon sand with NaOH. In this regard, various amounts of sulfuric acid, water, NH4VO3 as colorant, NaF as mineralizer and extra quartz were added to the prepared Na 2ZrSiO5. Role of quartz was to omit the repercussions of presence of free zirconia in the composition. The main objective of this work is to assess various reactions at different temperatures during blue pigment synthesis. Phase analysis was done by X ray... 

In the present study, the fluid characteristics of triangular turbulent jet flow are considered experimentally and numericafly. The results of spatially developed three- dimensional jet, issued from an equilateral triangular nozzle are presented. The jet is discharged to both bounded and unbounded domains. Because of the wind tunnel set up restrictions, the experimental study has done just for the bounded domain. The hot-wire anemometry is used for experimental study. A numerical method employing control volume approach with collocated grid arrangement which couples the velocity and pressure fields with SIMPLEC algorithm is introduced to discrete the governing equations of fluid flow. The...