Loading...
Search for:
ranjbaran--a
0.117 seconds
Total 15527 records
State functions: the milestone of fracture
, Article Archive of Applied Mechanics ; Volume 86, Issue 7 , 2016 , Pages 1311-1324 ; 09391533 (ISSN) ; Ranjbaran, M ; Sharif University of Technology
Springer Verlag
2016
Abstract
The fracture phenomenon is defined via the change of state of structure (entity) between the intact and the fractured end states as the function of the state variable. The twin state functions are defined for the transition of unit of the entity between its two end states. The state ratio is defined as the ratio of the two state functions. The property of the cracked structure is defined as the product of the structure property and the state ratio. The work is then used to derive the main parameters of the fracture mechanics. The work is verified via five examples. © 2016, Springer-Verlag Berlin Heidelberg
State-based buckling analysis of beam-like structures
, Article Archive of Applied Mechanics ; Volume 87, Issue 9 , 2017 , Pages 1555-1565 ; 09391533 (ISSN) ; Ranjbaran, M ; Sharif University of Technology
2017
Abstract
Beam, column, plate, and any other structure, under full or partial compressive loading, are prone to failure by the buckling phenomenon. At the instant of failure, the structure may be in unpredictable elastic, elastic–plastic, full plastic, cracked, or other forms of deterioration state. Therefore, in spite of so much study, there is no definite solution to the problem. In this paper a unified, simple, and exact theory is proposed where buckling is considered as the change of state of structure between intact and collapsed states, and then the buckling capacity is innovatively expressed via states and phenomena functions, which are explicitly defined as functions of state variable. The...
Innovative theory for the compliance computation in rotors
, Article Scientia Iranica ; Volume 24, Issue 4 , 2017 , Pages 1779-1788 ; 10263098 (ISSN) ; Ranjbaran, M ; Sharif University of Technology
2017
Abstract
The conventional energy release rate approach to the computation of the crack compliance in rotors is critically reviewed and its shortcoming is highlighted. The state functions and the generic compliance are introduced, defined, and verified. The proposed functions are defined based on the end states' conditions and are exact. The crack compliance of the shaft in torsion is explicitly defined as the function of the crack depth ratio and recommended as a good alternative to the classical procedure of the energy release rate method. The accuracy and efficiency of the work are verified by concise mathematical formulation and comparison of the results of the work with the others in four...
A Model for Supplier Selection by Considering Buyer and Supplier Benefits
, M.Sc. Thesis Sharif University of Technology ; Kianfar, Farhad (Supervisor)
Abstract
Supply chain problems consist of a large number of issues. One of the key problem in this area is supplier selection in supply chain. Several criteria must be considered in the supplier selection. So, multi criteria decision making approach, neural network, mathematical programming and etc. are used for solving this problems. In most of these problems, supplier selection is done according to the buyer’s objectives.
So far, several methods are provided for supplier selection problem. In majority of them, supplier selection problem is surveyed from buyer’s viewpoint and in those have only been considered the buyer’s benefit maximization that will not necessarily lead to optimal condition...
So far, several methods are provided for supplier selection problem. In majority of them, supplier selection problem is surveyed from buyer’s viewpoint and in those have only been considered the buyer’s benefit maximization that will not necessarily lead to optimal condition...
An interface tool for finite element–based optimal design
, Article International Journal on Interactive Design and Manufacturing ; Volume 18, Issue 1 , 2024 , Pages 375-383 ; 19552513 (ISSN) ; Khodaygan, S ; Sharif University of Technology
2024
Abstract
Optimal design of engineering systems with complex geometry under multiple loadings is always a challenging procedure. This paper introduces a computational interface tool between ABAQUS® and MATLAB® that can be used for carrying out the parametric optimal design of complex mechanical components. The software is developed entirely in MATLAB® environment which can handle constrained optimization problems without the need for the user to explicitly define the constraints using mathematical equations or functions. In this software, the design variables are proposed for selection through a user-friendly environment and the objective function can be iteratively evaluated by the finite-element...
Investigating the Influence of a Silty Layer on the Liquefaction of Saturated Sandy Soils through Numerical Methods
, M.Sc. Thesis Sharif University of Technology ; Pak, Ali (Supervisor)
Abstract
One of the main geotechnical phenomena that causes severe damage during earthquake is liquefaction. This incident occurs due to the undrained behavior of loose sandy soils. In this occurrence, the interaction between the solid and liquid phases in a cyclic motion leads to an increase in pore water pressure and a decrease in interactive forces (effective forces) between grains in the solid grains. Therefore, shear strength decreases. Different aspects of the aforementioned phenomenon is investigated, namely, field, laboratory, and numerical; nevertheless, the study is largely focused on the numerical modelling. Most studies in this field are carried out on a one-layer saturated sand. However,...
Prediction of Hydraulic Fracturing Technology in Naturally Fractured Rocks, by Considering Immiscible Two-phase Flow
, Ph.D. Dissertation Sharif University of Technology ; Taghikhani, Vahid (Supervisor) ; Ayatollahi, Shahab (Supervisor) ; Shad, Saeed (Supervisor) ; Ranjbaran, Abdolrasul ($item.subfieldsMap.e)
Abstract
To have a deeper understanding of Hydraulic fracturing operation, in this study four important parts in this field was developed and simulated. In the first part, continuity and momentum equations for a single phase flow in a propagating penny-shaped fracture inside an impermeable matrix was revisited based on a fixed coordinate system. Its correctness was validated against experimental data and its features were compared with the well-known lubrication theory in analytical form. The new derived continuity equation caused the fracture tip to have a positive and finite pressure while, the conventional model predicted negative infinity for that. In the second part, Finite Volume method was...
A heuristic insight on end-point calculation and a new phase interference parameter in two-phase relative permeability curves for horizontal fracture flow
, Article Transport in Porous Media ; Volume 119, Issue 3 , 2017 , Pages 499-519 ; 01693913 (ISSN) ; Shad, S ; Taghikhani, V ; Ayatollahi, S ; Sharif University of Technology
2017
Abstract
Relative permeability curves of two-phase flow in a fracture have been a subject of study in recent years. The importance of these curves have been widely observed in multidisciplines, such as water subsurface resources, geothermal energy and underground hydrocarbon resources, especially fractured oil and gas reservoirs. Extensive experimental studies have been cited alongside the numerical studies in this area. However, simple analytical and practical solutions are still attractive. In the current study, wettability effects and phase interference explicitly were tried to be implemented in a simple analytical formula. The wettability effects are represented by residual saturations which...
Three-dimensional diffraction analysis of phase and amplitude gratings based on legendre expansion of electromagnetic fields
, Article Photonic Applications in Nonlinear Optics, Nanophotonics, and Microwave Photonics, Toronto, ON, 12 September 2005 through 14 September 2005 ; Volume 5971 , 2005 ; 0277786X (ISSN) ; Mehrany, K ; Rashidian, B ; Ranjbaran, M ; Morandotti R. A ; Ruda H. E ; Yao J ; Sharif University of Technology
2005
Abstract
Three-dimensional vectorial diffraction analysis of phase and amplitude gratings in conical mounting is presented based on Legendre expansion of electromagnetic fields. In the so-called conical mounting, different fields components are coupled and the solution is not separable in terms of independent TE and TM cases. In contrast to conventional RCWA in which the solution is obtained using state variables representation of the coupled wave amplitudes by expanding space harmonic amplitudes of the fields in terms of the eigenfunctions and eigenvectors of the coefficient matrix defined by rigorous coupled wave equations, here the solution of first order coupled Maxwell's equations is expanded in...
Dispersion and gain investigation of free electron laser based on legendre polynomial expansion
, Article Photonic Applications in Nonlinear Optics, Nanophotonics, and Microwave Photonics, Toronto, ON, 12 September 2005 through 14 September 2005 ; Volume 5971 , 2005 ; 0277786X (ISSN) ; Chamanzar, M ; Mehrany, K ; Rashidian, B ; Ranjbaran, M ; Morandotti R. A ; Ruda H. E ; Yao J ; Sharif University of Technology
2005
Abstract
Free electron lasers have been the subject of intensive interest during the recent decades. In this paper, free electron laser having sheet electron beam with arbitrary inhomogeneous profile of transverse distribution of the beam current density is studied in the linear regime, whereas a novel approach based on the Legendre polynomial expansion of eigenfunctions, already used in analyzing optical structures including stratified structures and diffraction gratings, is adapted to find the eigenfunctions and eigenvalues of the structure. As for this method is unconditionally stable, it works pretty well even in those cases in which the conventional transfer matrix method suffers from numerical...
Unraveling Legal Complexities: Muslim and non-Muslim Estate Administration Process in Malaysia and Brunei
, Article De Jure: Jurnal Hukum dan Syar'iah ; Volume 16, Issue 2 , 2024 , Pages 531-554 ; 20851618 (ISSN) ; Alihan, A. A ; Hamid, A. A. A ; Sultan, B ; Sharif University of Technology
2024
Abstract
Estate administration involves managing and distributing a deceased individual’s assets to beneficiaries, as well as managing the liabilities. This process comprises legal, financial, and administrative tasks that ensure assets are transferred based on the deceased's wishes and in accordance with the law. In Southeast Asia countries such as Indonesia, Malaysia and Brunei where Muslims represents the majority of population, the Islamic law plays an integral part in the inheritance management as the process to be in line with the Islamic teachings and principle. The role of the syariah authority namely the syariah courts is prevalent and therefore, abidance to the rule under the syariah legal...
Intelligent semi-active vibration control of eleven degrees of freedom suspension system using magnetorheological dampers
, Article Journal of Mechanical Science and Technology ; Volume 26, Issue 2 , 2012 , Pages 323-334 ; 1738494X (ISSN) ; Sarrafan, A ; Khayyat, A. A. A ; Zabihollah, A ; Sharif University of Technology
2012
Abstract
A novel intelligent semi-active control system for an eleven degrees of freedom passenger car's suspension system using magnetorheological (MR) damper with neuro-fuzzy (NF) control strategy to enhance desired suspension performance is proposed. In comparison with earlier studies, an improvement in problem modeling is made. The proposed method consists of two parts: a fuzzy control strategy to establish an efficient controller to improve ride comfort and road handling (RCH) and an inverse mapping model to estimate the force needed for a semi-active damper. The fuzzy logic rules are extracted based on Sugeno inference engine. The inverse mapping model is based on an artificial neural network...
Performance and exhaust emission characteristics of a spark ignition engine operated with gasoline and CNG blend
, Article Proceedings of the Spring Technical Conference of the ASME Internal Combustion Engine Division ; 2012 , Pages 179-187 ; 15296598 (ISSN) ; 9780791844663 (ISBN) ; Hamidi, A. A ; Mozafari, A. A ; Sharif University of Technology
2012
Abstract
Using CNG as an additive for gasoline is a proper choice due to higher octane number of CNG enriched gasoline with respect to that of gasoline. As a result, it is possible to use gasoline with lower octane number in the engine. This would also mean the increase of compression ratio in SI engines resulting in higher performance and lower gasoline consumption. Over the years, the use of simulation codes to model the thermodynamic cycle of an internal combustion engine have developed tools for more efficient engine designs and fuel combustion. In this study, a thermodynamic cycle simulation of a conventional four-stroke spark-ignition engine has been developed. The model is used to study the...
A comparative study of the performance of a SI engine fuelled by natural gas as alternative fuel by thermodynamic simulation
, Article 2009 ASME Internal Combustion Engine Division Fall Technical Conference, ICEF 2009, Lucerne, 27 September 2009 through 30 September 2009 ; 2009 , Pages 49-57 ; 9780791843635 (ISBN) ; Hamidi, A. A ; Mozafari, A. A ; Sharif University of Technology
American Society of Mechanical Engineers (ASME)
2009
Abstract
With the declining energy resources and increase of pollutant emissions, a great deal of efforts has been focused on the development of alternatives for fossil fuels. One of the promising alternative fuels to gasoline in the internal combustion engine is natural gas [1-5]. The application of natural gas in current internal combustion engines is realistic due to its many benefits. The higher thermal efficiency due to the higher octane value and lower exhaust emissions including CO2 as a result of the lower carbon to hydrogen ratio of the fuel are the two important feature of using CNG as an alternative fuel. It is well known that computer simulation codes are valuable economically as a cost...
Analytical and experimental analyses of nonlinear vibrations in a rotary inverted pendulum
, Article Nonlinear Dynamics ; Volume 107, Issue 3 , 2022 , Pages 1887-1902 ; 0924090X (ISSN) ; Pasharavesh, A ; Khayyat, A. A. A ; Sharif University of Technology
Springer Science and Business Media B.V
2022
Abstract
Gaining insight into possible vibratory responses of dynamical systems around their stable equilibria is an essential step, which must be taken before their design and application. The results of such a study can significantly help prevent instability in closed-loop stabilized systems by avoiding the excitation of the system in the neighborhood of its resonance. This paper investigates nonlinear oscillations of a rotary inverted pendulum (RIP) with a full-state feedback controller. Lagrange’s equations are employed to derive an accurate 2-DoF mathematical model, whose parameter values are extracted by both the measurement and 3D modeling of the real system components. Although the governing...
A suction-controlled ring device to measure the coefficient of lateral soil pressure in unsaturated soils
, Article Geotechnical Testing Journal ; Volume 44, Issue 1 , 2020 ; Garakani, A. A ; Golshani, A ; Mirzaii, A ; Sharif University of Technology
ASTM International
2020
Abstract
A suction-controlled ring device has been developed to continuously measure the coefficient of lateral soil pressure in deformable unsaturated soil samples from the at-rest to the active condition under application of increasing vertical pressure and controlled matric suction. The device incorporates a thin aluminum specimen ring equipped with horizontal strain gages for recording the lateral soil strains. In addition, a sensor recording water volume changes is utilized to continuously monitor the degree of saturation of the soil sample during tests. The matric suction within the soil texture is controlled using the axis translation technique. In order to verify the performance of the ring...
Gum tragacanth gels as a new supporting matrix for immobilization of whole-cell
, Article Iranian Journal of Chemistry and Chemical Engineering ; Volume 24, Issue 4 , 2005 , Pages 1-7 ; 10219986 (ISSN) ; Vaziri, A ; Seifkordi, A. A ; Kheirolomoom, A ; Sharif University of Technology
2005
Abstract
We introduce a new smooth, non-toxic, biocompatible method for cross-linking of gum tragacanth (GT), a polysaccharide of natural origin, in order to serve as a new supporting matrix for immobilization systems. The modified gum is used as a matrix for the catalysis of the conversion of benzyl penicillin to 6-aminopenicillanic acid (6-APA) by means of Escherichia coli ATCC11105 with penicillin G acylase (PGA) activity. The results show that GT beads can not only serve as a proper matrix for immobilization, but show enhanced hydrolysis rate and stability compared to other immobilization systems used for this reaction. This signifies the potential of GT as a biocompatible matrix for...
True Class-E Design For Inductive Coupling Wireless Power Transfer Applications
, Article 30th International Conference on Electrical Engineering, ICEE 2022, 17 May 2022 through 19 May 2022 ; 2022 , Pages 864-868 ; 9781665480871 (ISBN) ; Safarian, A ; Fotowat Ahmady, A ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2022
Abstract
The Class-E power amplifier has been widely studied and formulated in the literature. Although the majority of reported inductive coupling wireless power transfer (WPT) systems use a class-E power amplifier for driving the primary coil, still there is a lack of a comprehensive study on class-E circuit dedicated to WPT, providing a set of closed form design equations for proper class-E operation. This paper presents the required design equations needed to design a 'true' class-E circuit for WPT applications. Equations for the series-tuned secondary coil WPT system are presented, as well as two different design procedures for the parallel-tuned secondary coil. The derived equations have been...
Crashworthiness determination of side doors and B pillar of a vehicle subjected to pole side impact
, Article Applied Mechanics and Materials ; Vol. 663, issue , 2014 , p. 552-556 ; Faieza, A. A ; Sahari, B. B ; Nuraini, A. A ; Halali, M ; Sharif University of Technology
2014
Abstract
Pole Side Impact Tes is one out of three crash tests described by Euro NCAP standard for star rating of a vehicle and is required for assessing the Adult Occupant Protection. In this paper the goal is to determine the crashworthiness of side doors and B pillar in a Pole Side Impact Test based on Euro New Car Assessment Program (Euro-NCAP) using computer and simulation method. In this matter, a vehicle model has been prepared and meshed using Hypermesh and CATIA. The velocity of 29 km/h has been assigned to the vehicle which was on top of a cart while the pole has been assigned as a rigid static object based on Euro NCAP requirements specifically. Results show that different amounts of energy...
Investigation of Thickness Influences On Energy Absorption For Side Doors And B Pillar In Euro NCAP Pole Side Impact Test
, Article Applied Mechanics and Materials ; Vol. 663, issue , Oct , 2014 , p. 585-589 ; Faieza, A. A ; Sahari, B. B ; Nuraini, A. A ; Halali, M ; Sharif University of Technology
2014
Abstract
To assess a car under the Euro New Car Assessment Program (Euro-NCAP), Adult Occupant Protection is one out of three parameters which need to be calculated with a weight factor of 50% while the other parameters, Child Occupant Protection and Pedestrian Occupant Protection, have a weight factor of 20%. The Pole Side Impact Test, beside two other tests, Side and Front Impact, is also required to calculate the Adult Occupant Protection. It shows how important the Pole Side Impact Test is and what an effective role it has in the car rating assessment. In this paper, the objective is to evaluate the effect of thickness on the energy absorbed by the side doors and the B pillar and its...