Loading...
Search for:
ramazani--arman
0.109 seconds
Total 158 records
Differentiating Signals Recorded from Rat Brain in Response to Different Olfactory Stimuli
, M.Sc. Thesis Sharif University of Technology ; Karbalaei Aghajan, Hamid (Supervisor)
Abstract
The olfactory sense in rats provides crucial information for identifying food sources, detecting threats, and facilitating social interactions. The olfactory bulb is one of the key brain regions involved in the initial processing of olfactory information and its transmission to higher brain areas for more complex processing. However, more advanced cognitive processes such as evaluation and decision-making rely on interactions between other brain regions. Among these, the striatum, as a part of the basal ganglia, plays a role in reward evaluation, reward-based learning, and shaping behaviors associated with sensory stimuli. This region contributes to learning, decision-making, and action...
Comparing half-metallic, MOKE, and thermoelectric behavior of the CrTiZ (Z = As, P) half-Heuslers: A DFT study
, Article Materials Research Express ; Volume 8, Issue 4 , 2021 ; 20531591 (ISSN) ; Zelati, A ; Boochani, A ; Arman, A ; Mirzaei, S ; Sharif University of Technology
IOP Publishing Ltd
2021
Abstract
Structural, half-metallic, magneto-optic, and thermoelectric properties of CrTiZ (Z = As, P) half-Heusleres compounds are investigated based on density functional theory. These compounds have mechanical stability in the ferromagnetic state with a high bulk modulus. They are often half-metallic with a large and integer magnetic moment and are very attractive in spintronics, magneto-optics applications. The magnetic moments of CrTiAs and CrTiP were 2.9865 μB and 3.00 μB, respectively, which were attributed to their ferromagnetic phase. Additionally, the positive sign of the phonon branches indicates the dynamic stability of these compounds. Applying both GGA and mBJ approximations, CrTiAs and...
The Effect of Rudder Angle on Ship’s Fuel Consumption
, M.Sc. Thesis Sharif University of Technology ; Khorasanchi, Mahdi (Supervisor) ; Zare, Arman (Co-Supervisor)
Abstract
The aim of this research is to investigate the effect of speed and direction of current on ship fuel consumption. A KCS benchmark model has been numerically studied in calm water and fourteen current and wind conditions with the same speed and different directions to determine how the ship performance is dependent on flow conditions. The model has been simulated in an artificial basin propelled by a single right-handed propeller via a CFD commercial code. Numerical results revealed a linear relationship between the deviation of current and wind from head-sea or following-sea conditions and the rudder angle. The head-sea and following-sea currents and winds increased and decreased the lateral...
Microstructure and optical properties of Au:N doped diamond-like carbon films: effect of working pressure
, Article Surfaces and Interfaces ; Volume 52 , 2024 ; 24680230 (ISSN) ; Mardani, M ; Shafiekhani, A ; Arman, A ; Luna, C ; Sharif University of Technology
2024
Abstract
In recent years, the incorporation of impurities (metallic or non-metallic) into diamond-like carbon films for industrial and biological applications has garnered considerable attention from researchers. In this study, gold nanoparticles and nitrogen impurities were introduced into diamond-like carbon using a co-deposition method involving Radio Frequency Plasma-Enhanced Chemical Vapor Deposition (RF-PECVD) and Radio Frequency Sputtering (RF-sputtering),modifying the working pressure from 14.5 to 19.5 mTorr. X-ray Diffraction (XRD) patterns confirmed the presence of gold nanocrystals in the samples. The surface morphology of the films was analyzed using images obtained from Scanning Electron...
Modeling of viscoelastic fluid flow behavior in the circular die using the leonov-like conformational rheological constitutive equations
, Article Macromolecular Symposia ; Volume 274, Issue 1 , 2008 , Pages 6-10 ; 10221360 (ISSN) ; Kanvisi, M ; Sharif University of Technology
2008
Abstract
In this paper, the flow behavior of Leonov-Like conformational rheological model, which has root in the generalized Poisson bracket formalism based on the conformation tensor, have been studied in the circular die flow. Prediction of the normal stress differences during the flow of these fluids lets us to follow and calculate relaxation dependent phenomena such as die swell. The model predictions have been compared for the four families of mobility expressions. The Study of the model prediction sensitivity to its mobility term shows that model predictions can cover a wide range of rheological behaviors generally observed for polymer melts and solutions in the circular die flow. Copyright ©...
Investigation of vacuum annealing effects on physical-mechanical properties of thermoplastic parts
, Article Materials and Design ; Volume 26, Issue 1 , 2005 , Pages 89-93 ; 02613069 (ISSN) ; Mousavi, S ; Sharif University of Technology
Elsevier Ltd
2005
Abstract
Impact and tensile strength of polystyrene and nylon 6 samples, which have been produced by injection molding before and after annealing in different conditions are obtained. Polystyrene samples that are heated on vacuum conditions can deform highly even in temperatures much less than polystyrene glass temperature. This phenomenon is reduced significantly by heating samples to annealing temperature in atmospheric pressure and then removing air from sample environment in constant temperature. Deformation problems for nylon were not so important but due to high temperature implied for annealing of nylon parts, some color change due to oxidative degradation are observed. So for nylon parts a...
Evaluation of the topographical surface changes of silicon wafers after annealing and plasma cleaning
, Article Silicon ; Volume 12, Issue 11 , 2020 , Pages 2563-2570 ; Ţălu, Ş ; Dallaev, R ; Arman, A ; Sobola, D ; Salerno, M ; Sharif University of Technology
Springer Science+Business Media B.V
2020
Abstract
Purpose: The morphological stability of silicon single crystal wafers was investigated, after performing cleaning surface treatments based on moderate temperature annealing and plasma sputtering. Methods: The wafer surfaces were measured by Tapping mode atomic force microscopy in air, before and after the different treatments. The 3D images were segmented by watershed algorithm identifying the local peaks, and the stereometric parameters were extracted thereof. The analysis of variance allowed to better assess the statistically significant differences. Results: All the resulting quantities were critically discussed. It appeared that the different cleaning treatments affected differently the...
Rheological measurement of molecular weight distribution of polymers
, Article e-Polymers ; Volume 13, Issue 1 , 2013 , Pages 217–228 ; 16187229 (ISSN) ; Ahmad Ramazani, S.A ; Sharif University of Technology
2013
Abstract
This paper has described a method to obtain the molecular weight distribution (MWD) of polymeric materials from their rheological data. The method has been developed for linear polymers with log normal molecular weight distribution. The rheological data required to obtain the molecular weight distribution are the shear storage modulus,G' (ω), and shear loss modulus,G' (ω) , extending from the terminal zone to the plateau region. For determining the molecular weight average, the method uses the relationship between stress moduli and relaxation spectrums, with the equation that connects dynamic rheological data with molecular weight distribution, and so it is not necessary to achieve the...
Preparation of polyethylene/layered silicate nanocomposites using in situ polymerization approach
, Article Macromolecular Symposia ; Volume 274, Issue 1 , December , 2008 , Pages 65-71 ; 10221360 (ISSN) ; Tavakolzadeh, F ; Sharif University of Technology
2008
Abstract
In this paper, preparation of polyethylene/clay nanocomposites (PECNC) by in situ Ziegler-Natta catalyst polymerization was investigated. A Ziegler-Natta catalyst was first supported on montmorillonite (MMT) type clay and subsequently used for polymerizing ethylene. Clay and clay supported catalyst were characterized by Fourier transmission infrared and ICP method. X-ray diffraction (XRD) and transmission electron microscopy results show that silicate layers of the mineral clay in prepared nanocomposites were intercalated and exfoliated in the polymeric matrix. Differential scanning calorimetry results show that the prepared nanocomposites have higher crystallization temperature than pure...
Fabrication of hollow carbon spheres doped with zinc cations to enhance corrosion protection of organosilane coatings
, Article Surfaces and Interfaces ; Volume 21 , 2020 ; Mahdavian, M ; Ramazani, A ; Sharif University of Technology
Elsevier B.V
2020
Abstract
Hollow carbon spheres (HCS) are spherical forms of carbon materials that can be used as nanocontainers due to their empty cores. In this work, zinc cations were doped in HCS (Zn@HCS) from an aquatic solution of zinc nitrate salt. Corrosion inhibition of released zinc cations in saline solution on bare mild steel samples was assessed by EIS, polarization, and electrochemical noise measurements. The sample surfaces were characterized through FTIR spectroscopy and grazing incidence XRD analyses after exposure to the test solutions. The results showed improvement in the corrosion resistance in the presence of Zn@HCS in a long immersion period. Zn@HCS were also incorporated in organosilane...
Preparation and Property Investigation of Propylene/Ethylene/ 1-Butene Co&terpolymers Modified by Nano Graphene Oxid
, M.Sc. Thesis Sharif University of Technology ; Ramazani Saadat, Ahmad (Supervisor)
Abstract
Propylene Copolymers and terpolymers with small amount of 1-butene& ethylene can greatly improve the properties of polypropylene material such as low temperature toughness, printing performance, transparency, process ability and so on, leading to expanding of its application. Poly(propylene-co-1-butene) performance intensely relies on its composition and chain structure. The copolymerization catalyzed by Ziegler-Natta catalyst, which is a multy-active central system. The Ziegler-Natta catalyst TiCl4/ Mg(OEt)2/ DIBP was used for copolymerization. The microstructure of copolymers were characterized by FTIR. The influence of different comonomer ratios on the copolymerization has been...
Manufacture of Smart Drug Delivery System with UCST Polymers
, M.Sc. Thesis Sharif University of Technology ; Ramazani, Ahmad (Supervisor)
Abstract
Smart heat-sensitive polymers play a unique role in drug delivery systems due to reversible behavior in response to environmental changes, especially temperature changes. Among the heat-sensitive polymers, UCST polymers due to their specific behavior and very little-known polymers with this feature are the subject of many new researches. In the present study, New designed temperature-sensitive polymers with UCST capability based on acrylamide and vinyl acetate were synthesized. These copolymers were synthesized in different percentages of acrylamide by free radical polymerization in solution conditions. All polymers compounds were characterized by H-NMR, FT-IR, DSC and GPC measurements. The...
The effect of thickness and film homogeneity on the optical and microstructures of the ZrO2 thin films prepared by electron beam evaporation method
, Article Optical and Quantum Electronics ; Volume 53, Issue 8 , 2021 ; 03068919 (ISSN) ; Talebani, N ; Zelati, A ; Ţălu, Ş ; Arman, A ; Mirzaei, S ; Jafari, A ; Sharif University of Technology
Springer
2021
Abstract
In this study, ZrO2 coatings with different thicknesses were grown by the electron beam evaporation technique. The crystalline structure was studied by XRD analysis which suggested the tetragonal and monoclinic phases for ZrO2 coatings. Additionally, the film thickness slightly enhanced the crystallinity. The surface morphology and fractal features were analyzed using Scanning Electron Microscopy (SEM). The surface statistical parameters and the fractal geometry were employed to analyze the impact of the coating thickness and homogeneity on the morphology of the films. The statistical processing and fractal dimension revealed variations in the morphology parameters due to the electron beam...
Electrokinetic Flow in pH-Regulated Solid-State/Soft Micro-Nanochannels
,
Ph.D. Dissertation
Sharif University of Technology
;
Saeedi, Mohammad Hassan
(Supervisor)
;
Mousavi, Ali
(Co-Supervisor)
;
Sadeghi, Arman
(Co-Supervisor)
Abstract
In recent years, advances have been made in the field of miniaturization of the devices (in order to increase their efficiency, lessen the materials needed for the constructions and experiments, reduce costs and energy usage) resulting in the dramatic increase of surface to volume ratio in these devices. This progress has led to the dominance of surface forces which can be used to control very important interface phenomena having a special application such as electrokinetic. Using today’s manufacturing technology; it is possible to construct micro-nanochannels made from different materials such as silicon, glass, quartz, polydimethylsiloxane (PDMS), polymethyl methacrylate (PMMA) whose...
Influence of film thickness on structural, optical, and electrical properties of sputtered nickel oxide thin films
, Article Microscopy Research and Technique ; Volume 87, Issue 7 , 2024 , Pages 1402-1412 ; 1059910X (ISSN) ; Korpi, A.G ; Karimi, M ; Jurečka, S ; Arman, A ; Luna, C ; Ţălu, Ş ; Sharif University of Technology
2024
Abstract
Utilizing radio frequency magnetron sputtering, we successfully fabricated nickel oxide thin films with different thickness (from 80 to 270 nm), and conducted an in-depth examination of their structural, morphological, optical, and electrical properties. The crystal structure and surface roughness were determined using x-ray diffraction (XRD) and atomic force microscopy (AFM), respectively. The XRD analyses showed that the films were composed of cubic nickel oxide, exhibiting a notable orientation along the (200) direction. This crystal texture partially increased when the film thickness reached 270 nm. In addition, a direct correlation between film thickness and crystallite size was...
Dynamic model identification and control of small turbojet engines using frequency response analysis
, Article 2012 International Conference onAdvanced Mechatronic Systems, ICAMechS 2012 ; 2012 , Pages 553-558 ; 9780955529382 (ISBN) ; Abdollahi Gol, H ; Ramazani, H ; Sharif University of Technology
2012
Abstract
System Identification is a key technology for the development and integration of modern engineering systems including gas turbines. These systems are highly parametric with complex dynamics and nonlinearities. Small turbojet engines are special class of gas turbines that are suitable for scientific purposes and researches in the area of stability, performance, simulation and fuel control design. The motivation behind the presented study is to improve the speed, quality and cost of engine testing and to gain insight into alternatives to traditional identification methods for gas turbines. It discusses the identification of small turbojet engine dynamics by validating the thermodynamic model...
PID controller design for micro gas turbines using experimental frequency-response data and a linear identification technique
, Article International Journal of Advanced Mechatronic Systems ; Volume 5, Issue 6 , 2013 , Pages 353-364 ; 17568412 (ISSN) ; Gol, H. A ; Ramazani, H ; Sharif University of Technology
E-flow Inderscience
2013
Abstract
This paper discusses the identification process of engine dynamics and presents derived transfer function models including; thrust, shaft speed, compressor exit pressure and turbine exit temperature in relation to the fuel flow. Model identification approach, presented in this paper, is the first to consider frequency-sweep signals to excite dynamics, as well as to utilise windowing and smoothing techniques to reduce random errors in the spectral estimates. Here, frequency sweep provides a fairly uniform spectral excitation and chirp-z transform warrants the exact determination of the frequency responses that are robust to the uncertainties. The identified models are also validated with the...
A fuzzy traffic assignment algorithm based on driver perceived travel time of network links
, Article Scientia Iranica ; Volume 18, Issue 2 A , 2011 , Pages 190-197 ; 10263098 (ISSN) ; Shafahi, Y ; Seyedabrishami, S. E ; Sharif University of Technology
2011
Abstract
Traffic assignment is a step of travel demand estimation. Given a trip origin-destination demand matrix, this step determines traffic flow in each link, according to assumptions based on the behavior of drivers. Conventional assignment algorithms, which are mostly based on the Wardrop first principle of user equilibrium, assume that all drivers choose the shortest path to the destination, based on the same travel time computed by travel time functions. However, in reality, driver perception of travel time varies for a specific route. This paper presents a traffic assignment algorithm which assumes that driver perception of travel time affects route choices. Fuzzy set theory is used to define...
A nonlinear theoretical model for prediction of mechanical behavior of particulate composites and experimental verification of the model predictions
, Article Polymer Composites ; Volume 31, Issue 7 , August , 2010 , Pages 1150-1155 ; 02728397 (ISSN) ; Najafi, N. C ; Sharif University of Technology
2010
Abstract
A model for prediction the stress-strain behavior of particulate composite over wide ranges of filler concentration and composite deformation has been developed through combination of Anderson's and Yilmizer's model. The constitutive equations are extracted from first law of thermodynamic and nonlinear dilatational effects which are produced by filler-matrix debonding process. In addition to nonlinear behavior that has been resulted by filler-matrix debonding and was presented by Yilmizer, the formation and growing of void or cavitations has been also introduced in this model, whereas Anderson's model, most important reason for deviation of linear behavior is filler-matrix debonding and has...
A shortest path problem in an urban transportation network based on driver perceived travel time
, Article Scientia Iranica ; Volume 17, Issue 4 A , August , 2010 , Pages 285-296 ; 10263098 (ISSN) ; Shafahi, Y ; Seyedabrishami, S. E ; Sharif University of Technology
2010
Abstract
This paper proposes a method to solve shortest path problems in route choice processes when each link's travel time is a fuzzy number, called the Perceived Travel Time (PTT). The PTT is a subjective travel time perceived by a driver. The algorithm solves the fuzzy shortest path problem (FSPA) for drivers in the presence of uncertainty regarding route travel time. For congested networks, the method is able to find the shortest path in terms of perceived travel time and degree of saturation (congestion) along routes at the same time. The FSPA can be used to support the fuzzification of traffic assignment algorithms. The applicability of the resulting FSPA for the traffic assignment was tested...