Sharif Digital Repository

In this research, we focus on study and fabrication of organic inorganic solar cells. We use and optimize various methods such as one-step spin-coating, two-step sequential deposition and vapor-assisted solution process (VASP), to prepare high quality perovskite films. One-step deposition is simplest method for deposition of perovskite films. Although perovskite deposition by this method is very simple, the control of uniformity and surface film morphology is difficult. Chlorine inclusion, optimization of annealing conditions, and a sequential solution-based deposition method have been demonstrated to increase film coverage and uniformity. Hence, we use sequential deposition method for... 

Quantum entanglement and superposition are wonderful and mysterious phenomena of quantum mechanics. By means of quantum entanglement, two or more systems become partner in state of each other . As a result, measurements on each of these systems affect the status of other systems. Quantum superposition allows a system inhabits several of its possible quantum states simultaneously. These two features are applicable in many technologies in present age. Photons, as an quantum unit of light, are appropriate candidate for utilization these properties. Because they are robust to decoherence and for their preparation exist various methods. Hence, we interested to generation of quantum states of... 

Schizophrenia is a devastating disorder that steals the opportunity of having a normal life from the sufferers. Drugs used in treating this disorder usually target psychotic symptoms and do not affect negative symptoms effectively. One of the deficits falling into this category is the impaired reversal learning. These patients usually learn the rules but do not renounce them after the contingencies of reward have been reversed. To investigate the reasons of this impairment, first a hypothesis of how different parts of the brain communicate during reversal learning is proposed using the physiological evidence. Then considering the known relation between the actor-critic model of the... 

The use of renewable energy sources has received much attention due to the increasing need for energy, limited energy resources and the pollution of fossil fuels. Among all types of solar energy conversion technology, photovoltaics has the highest technical potential and Iran’s geographical location is very suitable for benefiting from this energy. So, in this thesis, the fabrication and characterization of nanostructured solar cells based on organic-inorganic perovskites have been investigated. Many research goups have tried to increase the efficiency of perovskite solar cells. The efficiency of this kind of solar cells depends mainly on the light-absorbing layer (perovskite) and its... 

Perovskite solar cells (PSCs) have emerged as a promising photovoltaic technology due to their high power conversion efficiency, ease of fabrication, relatively low production cost, and compatibility with various scalable deposition techniques. Nevertheless, several critical challenges including sensitivity to moisture and ambient oxygen, long-term instability, and the widespread use of toxic anti-solvents during film fabrication still hinder the large-scale commercialization of PSCs. Achieving perovskite layers with high crystalline quality, uniform and stable morphology under ambient conditions, and without employing harmful chemicals is a key bottleneck for industrial development. The... 

Solar cells, as a part of photovoltaics (PV) industry, have a significant share in the renewable energy market. Perovskite solar cells (PSCs) and thin film solar cells (TFSCs) achieved 23% and 22% power conversion efficiencies (PCEs) respectively. However, the PV industry still faces challenges like “high manufacturing costs” and “stability”. Among the strategies to overcome these challenges are substitution of the costly materials with cheaper, more abundant ingredients along with utilizing inexpensive deposition methods like printing rather than vacuum-based methods such as evaporation and sputtering. Carbon materials attract more attention in the solar cell research community for their... 

Perovskite solar cells (PSCs) have emerged as a leading thin-film photovoltaic technology owing to their outstanding optoelectronic properties, low fabrication cost, and compatibility with flexible substrates. However, the intrinsic instability of methylammonium (MA)–containing compositions remains a major barrier to commercialization; therefore, developing stable MA-free inks is essential for achieving efficient and durable devices. This dissertation presents an integrated strategy for improving the performance and stability of formamidinium-based, MA-free PSCs with carbon electrodes, built on three pillars: ink-formulation engineering, crystallization control, and interfacial modification.... 

In this research, a powder containing magnesium-aluminate spinel particles is prepared based on co-precipitation method and 5% , 10%, 15% and 20% zirconia-contained composites are produced as second phase from the synthesized powder. The raw materials used in the synthesis comprise hexa-hydrated magnesium nitrate, nona-hydrated aluminum nitrate, ammonium bicarbonate, 28% ammonium solution and distilled water. The properties of the powder is then investigated using STA, XRD and SEM tests. Also, XRD and SEM analyses as well as triple point flexural strength and Vickers hardness tests are carried out in order to investigate the effect of adding zirconia to the powders. The variations of the... 

The purpose of this thesis is the construction of hard and tough Zirconia bodies from economical raw materials using minimum sintering time and temperature.
Stabilizers cause tetragonal particles to be remained in cubic phase. Most additives are Ca, Ce, Mg and Y ions the whole of which are rare earth elements and make solid solutions with Zirconia.
In this project different percents of CaO, MgO, CeO2, and Y2O3 were mixed with ZrO2 and they were sintered after granulation, cold pressing and Cold Isostatic Pressing. Using jar milling and fast milling, the particle size of purchased ZrO2 was reduced to 0.7 um. The whole needed additives were purchased with particle size below 300 nm.... 

In this process transparent polycrystalline alumina ceramic was provided by submicron alumina gel casting and spark plasma sintering. The monomer system in this process including met acrylamide and methylene bis acrylamide was chosen as a monomer and cross linker. These two agents comprise 5%wt of the precursor with the ratio of 3 to 1 respectively. With the optimization of Dolapix CE64 as a dispersant and providing the suspension with 76%wt, a greenware with the density of 56.3% wt was obtained. Differential thermal analysis of green body showed that the existing monomers are removed by the time the body reaches 550°C. In order to access high real in-line transmittance, the microstructure... 

In recent years lithium-air batteries captured worldwide attention because of their high energy density. Solid state electrolytes is one of the main components of lithium-air batteries. Lithium almunium titanium phosphate(LATP) is a nasicon type ion conduction which may be of great potential as solid electrolyte. The object of this thesis was the preparation of LATP solid electrolyte which can be used in a lithium-air battery. To reach this goal LATP powder was synthesized using a solution-based method and an appropriate crystallization temperature was selected based on obtained results of X-ray diffraction analysis. In the next step solid electrolytes was prepared under different pressing... 

The goal of the present study is to analyze the effect of CaF2 and nano-TiO2 as additives on formulation and properties of common dental glass-ceramics. To achieve the goal, a glass system based on SiO2-Al2O3-Li2O-K2O-P2O5-ZnO-ZrO2 was considered to produce glass-ceramic samples and the additives, nano-TiO2 and CaF2, with the 0.5, 1, and 1.5 %Wt was added to the system. After the melting process, the glass samples poured in the water and ferrite was produced. In the next step, the ferrite was milled and pressed. In the heat treatment step, the samples were treated in the temperature range of 650-850°C in order to gain lithium disilicate glass-ceramics. In the last step, the chemical... 

Magnesia-Doloma refractories has advantages such as stability in alkaline environments, clean steel production, resistance to acid slag, good cement kiln coating flexibility, low production cost. It also has some weaknesses such as low resistance to thermal shock and quick hydration. In the present study using Birjand Mines Magnesite powders and Dolomites from Zefreh, Esfahan, Magnesia-Doloma clinkers were pressed under the pressure 90 MP and prepared at 1650⁰C in furnace under air atmosphere. The effect of adding 0, 2, 4, 6, and 8% of the Microparticles and Nanoparticles of α-Alumina on microstructure, physical properties, hydration resistance and Thermal shock resistance was studied. Phase... 

TiO2 has been considered the most promising photocatalyst for the degradation of pollutants in air or water; however, it shows poor absorption of visible light and requires ultraviolet (UV) light for activation. We have successfully synthesized a visible-light-active carbon and nitrogen and yttrium tridoped TiO2 catalyst. In this study, Nanocrystalline photocatalysts of TiO2 doped with yttrium, codoped with carbon and nitrogen and tridoped with carbon and nitrogen and yttrium were prepared by the sol–gel method and investigated by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), diffuse reflectance spectroscopy ( DRS), Scanning electron microscopy (SEM/EDS) and... 

The main purpose of this research was simultaneous doping of carbon and nickel in the structure of barium strontium titanate, in order to investigate its dielectric and optical properties. Powders and films of BST, was synthesized by the sol-gel method in six different compositions: without any dopant, 0.04mol nickel dopant, 0.04mol nickel dopant accompanied by different amounts of carbon (0.01, 0.02, 0.03 and 0.04 mol). Suspensions were dip coated on alumina and quartz substrates. Structural features and chemical bonds, were studied through thermal analysis, XRD, FT-IR, FESEM and AFM. For electrical and optical properties, LCR-meter and UV-Vis were used. XRD and FESEM proved that nickel... 

This study investigates the effect of titanium dioxide and magnesium oxide additives on hydroxyapatite synthesized by sol-gel and composite with the predominant phase of hydroxyapatite by in situ method to improve mechanical properties. Scaffold samples were synthesized with nanometer-sized hydroxyapatite and composite powder particles by gel casting and sintered at 1200 ° C. Then, to evaluate the synthesized powders, simultaneous thermal analysis (STA), X-ray diffraction test, FTIR test, FESEM, EDS, and MAP analysis were used. Also, to evaluate the mechanical properties of the scaffolds, a compressive test was used, and to evaluate the scaffolds' density, the Archimedes method was used.... 

To reduce material consumption needed in production as well as avoiding thousands of tons of contaminations produced by spent materials in the battery industry, recycling was taken into consideration. In this study silica was recycled from spent lead-acid battery separators by the pyrolysis process. silica along with high-density polyethylene (HDPE), can be used as supporting material for fabricating form-stable phase change materials (FSPCM). FSPCMs are of great ability to be used as thermal energy storage (TES) in different parts of a building e. g. wallboards to reduce energy consumption. In this line, an eutectic mixture of lauric acid, palmitic acid and paraffin with the melting point...