Sharif Digital Repository

NiTi Memory alloys have a great range of applications. Porous metallic biomaterials (e.g., stainless steel, chromium- cobalt, titanium and nickel–titanium (NiTi)) represent superior alternatives to traditional non-porous metallic implants for two main reasons. First, open porosity can enhance bone ingrowth and thus improve fixation at the interface between bone and implant. Second, porosity decreases the mismatch in stiffness between bone and implant, thus reducing stress-shielding effects which shorten the lifetime of the implant through bone resorption and loosening. NiTi foams may thus find multi-functional applications such as bone implants, impedance-matching connectors between... 

Collapsible soils are kinds of problematic soils which are susceptible to large and sudden reduction in volume upon wetting. A manifest kind of these soils is loess; catastrophic settlement of structures which are built upon it has been observed when the soil becomes wet. In this investigation the collapse potential of samples of loess taken from Gorgan, Golestan, Iran, has been studied by using unsaturated odometer tests under controlled matric suction. To this end, two modified odometer apparatus with the capability of controlling the matric suction, have been designed and developed. Undisturbed samples of soil have been tested under K0 condition, while the matric suction, volumetric... 

Considering the drastical increase of greenhouse gases in the atmosphere, especially carbon dioxide, reduction of these gases seems necessary to combat global warming. Fossil fuel power plants are one of the main sources of CO2 emission. In this paper, CO2 capture from a natural gas fired steam cycle power plant using oxy-fuel combustion technology is studied. The Integrated Environmental Control Model (IECM) developed by Carnegie Mellon University was used to evaluate the effect of this capture technology on the plant efficiency and economic parameters of the system. Since the oxygen production plant, CO2 capture and transport are cost and energy intensive, the cost of electricity generated... 

Due to the increasing influence of distribution generation , their effect in planning can't be ignord , especially solar panels ,which are incresing rapidly. The main purpose of this thesis is to an active distribution network that annually load bus and the amount of photovoltaic production in it increases and plan dynamically. In the planning that is done , uncertanty in the amount comsumption load and uncertanty in the pattern of sunlight and also annual innterest rates in the classical system we have planned by optimizing the network expansion costs , in addition to supplying the load bus, we can keep the voltage drop bus and line filling within the allowable . To do this , we considered... 

Solvent-based absorption is one of the most effective methods for reducing carbon dioxide emissions in combined cycle power plants. In such integrated systems, a portion of the steam from the intermediate-pressure turbine is utilized to supply heat to the carbon capture unit, and its condensate is returned to the heat recovery steam generator. This tight integration forms a coupled system. Key challenges include variations in flue gas flow rate and composition due to load changes and fuel switching. Therefore, the integrated system must be operationally flexible in both design and control. To assess these aspects, the development of a dynamic model of the integrated system is essential, and... 

The primary objective of this thesis is to provide solutions addressing some security loopholes in continuous variables quantum key distribution protocols. The coherent detection method is utilized in this particular quantum key distribution scheme, which is a phase-sensitive detection. To measure in the quantum noise limit in the detection part, we need a local optical oscillator, which must possess a high intensity and a consistent phase correlation with the quantum signal. Therefore, reconstructing the emitter’s reference phase in the receiver’s detection system is considered as one of the most critical challenges in these protocols. In order to attain this goal, in the early versions of... 

In this thesis, we introduce a novel Artificial Intelligence (AI) system inspired by the philosophical and psychoanalytical concept of imagination as a ``Re-construction of Experiences". Our AI system is equipped with an imagination-inspired module that bridges the gap between textual inputs and other modalities, enriching the derived information based on previously learned experiences. A unique feature of our system is its ability to formulate independent perceptions of inputs. This leads to unique interpretations of a concept that may differ from human interpretations but are equally valid, a phenomenon we term as ``Interpretable Misunderstanding". We employ large-scale models,... 

According to today’s medicine progress, the need for improving the medical facilities have been increased. Within the human body, the biomolecules concentration gradient is regulating the cell functions. Biological processes such as immune response, wound healing, and cancer metastasis have been affected by the bimolecular concentration gradient. So understanding the cell behavior in the presence of a chemical gradient can improve the understanding from these biological processes, and also would help in medical researches. On the other hand, finding the appropriate dose of the drugs and in some cases finding the most effective drug is a clinical challenge that made a new field of research in... 

Determination of the elastic fields associated with a spherical multiply-coated inhomogeneous inclusion is a problem of great interest among researchers. In this work a set consisting of N+1 concentric spherical domains is considered. Each domain is either isotropic or spherically isotropic and is functionally graded (FG) in the radial direction. The outermost spherical surface is subjected to nonuniform loading and the constituent phases are subjected to some prescribed nonuniform body force and eigenstrain fields. When the outermost domain is an unbounded medium with zero eigenstrain and body force fields then an N-phase multi-inhomogeneous inclusion problem is realized for which the... 

Millions of people are exposed to noise every day in their work and life, and their physical and mental health is at risk due to this issue. Hence, the issue of noise and vibration has become an important factor in car quality. One of the sources of noise and vibration in the vehicle is the engine. The engine is the heart of the car and its most important part. Therefore, reducing Engine noise can have a significant effect on the noise emitted by the vehicle. Engine noise can be divided into three categories: 1 - combustion noise 2 - mechanical noise 3 - aerodynamic noise. This project is in line with a project defined between the university and industry aimed at improving all sources of... 

Natural reservoirs, in addition to having pores and voids, contain fractures and microfractures in which the flow of one or more fluids occurs simultaneously. Resource extraction from these reservoirs usually requires the injection of a second fluid. Therefore, the analysis of two-phase flow is important in the fields of reservoir, water, and geomechanics engineering. Since the 1960s, the dual-porosity method has been developed as an efficient tool for modeling fractured porous media (fractured formation), and numerous studies have been conducted to enhance this method. The dual-porosity method is an approximate approach that offers significant advantages due to its low computational cost... 

The development of clean, renewable and alternative sources of fossil fuels has increased in recent years due to various factors such as environmental pollution, reduced fossil fuel resources and increased energy consumption. The application of microbial fuel cells is one of the clean energy production methods using renewable sources such as municipal sewage. The microbial fuel cell converts the chemical energy stored in organic materials into electrical energy and simultaneously purifies the sewage. Increasing current density and power density are the most important challenges for microbial fuel cells. In this study, the two biocatalysts of Shewanella Oneidensis MR1 and Escherichia coli... 

Despite the increase in the number of cardiovascular diseases worldwide, the number of new drugs to treat these diseases has been decreasing in the last decade. Current preclinical drug evaluation strategies, which use cell cultures and oversimplified animal models, cannot meet the growing demand for new and effective drugs. In the last decade, the development of microfluidic bioreactors and organ-on-chip systems to improve the drug screening process has been increasing significantly. These systems have shown many advantages over previous preclinical models. Despite all these advantages, keeping the oxygen concentration at the optimal physiological level in microfluidic systems has its own... 

Air-cooled condenser is widely used in thermal power plants as its main cooling system. However, the thermal capacity of air-cooled condensers reduces considerably in environmental wind drafts. So, the purpose of this study is to find practicable solutions to minimize the mal-performance of air-cooled condensers in windy conditions in either design or off-design conditions and consequently prevent the related steam turbines power reduction. The target combined cycle power plant consists of 4*160 MW steam turbines and 4 air-cooled condensers in its steam cycle part. This research presents two general and practical remedies, which are also applicable to many different powerplants irrespective... 

During fuel combustion, aromatic sulfur compounds in energy fuels convert into sulfur oxides, which cause major environmental problems such as acidic rain, global warming, and air pollution. Absorption desulfurization is one of the promising and economical methods to remove these sulfur compounds from fuels. Metal-organic frameworks (MOFs) are a class of nanoporous materials that are of interest for use as adsorbents due to their high specific surface area, unique surface adsorption properties, high adsorption capacity, tunable porosity, flexible dynamic behavior, and diversity in functional and metal groups. In this research, we first synthesized five metal-organic frameworks, namely... 

In this research, molybdenum and tungsten catalysts modified with cobalt and nickel on a carbon support have been synthesized and investigated in the oxidation desulfurization process. A model fuel was used to evaluate the synthesized catalysts. This model fuel was n-decane. dibenzothiophene was also used as a sulfur model. The synthesized catalysts were subjected to various analyzes such as XRD, FTIR, Raman, BET-BJH, NH3-TPD, TEM and ICP-OES for structural evaluation. On the other hand, synthetic parameters such as metal loading rate, molar or weight ratio of secondary metal (cobalt and nickel) to primary metal (molybdenum and tungsten) and molar ratio of citric acid to primary metal as...