Sharif Digital Repository

The study of the anisotropy of the arrival directions is an essential tool to investigate the origin and propagation of cosmic rays primaries. A pentagon array has been designed to collect data around the knee region of cosmic ray spectrum. The experimental results of this array obtained from October 2016 to October 2017. During this period, more than 5.3×105 extensive air shower events at energies in the decade below 1 PeV has been accumulated by this array at Sharif University of Technology in Tehran (35°43′N, 51°20′E, 1200m a.s.l=890 g cm-2). In analyzing the data set, we have used appropriate techniques of analysis and considered environmental effects. We report the analysis of the... 

In this study, a new polymeric functionalized magnetic nanocatalyst containing a molybdenum Schiff base complex was prepared using a few consecutive steps. Poly (methylacrylate)-coated magnetic nanoparticles were synthesized via radical polymerization of methyl acrylate onto modified magnetic nanoparticles followed by the amidation of the methyl ester groups with hydrazine. Polymeric functionalization efficiently provides the advantage that more catalytic units can be grafted on the surface of magnetic nanoparticles. The functionalization process was continued with salicylaldehyde which introduced Schiff base groups on to the surface of the polymeric support. In the final step, the desired... 

Numerical simulation of coupled Thermo-Hydro-Mechanical and Chemical (THMC) processes in deep Earth is an active field of research. In this study, a two-dimensional numerical model is developed based on the eXtended Finite Element Method (XFEM) to solve coupled reactive transport problems in saturated fractured rocks. According to high levels of heat and compaction in deep reservoirs, the Free-Face (FF) dissolution/precipitation as well as the Pressure Solution (PS) are considered for the aperture change in the formulation. The FF dissolution/precipitation refers to the mass exchange occurring at the free surfaces of the pores, whereas the PS takes place just among compacted grains and... 

Many recent studies show that Augmented Reality (AR) and Automatic Speech Recognition (ASR) technologies can be used to help people with disabilities. Many of these studies have been performed only in their specialized field. Audio-Visual Speech Recognition (AVSR) is one of the advances in ASR technology that combines audio, video, and facial expressions to capture a narrator's voice. In this paper, we combine AR and AVSR technologies to make a new system to help deaf and hard-of-hearing people. Our proposed system can take a narrator's speech instantly and convert it into a readable text and show the text directly on an AR display. Therefore, in this system, deaf people can read the... 

Recently, many researches show Augmented Reality (AR) and Automatic Speech Recognition (ASR) can help people with disabilities. In this paper we implement an innovative system for helping deaf people by combining AR, ASR, and AVSR technologies. This system can instantly take narrator's speech and converts it into readable text and shows it directly on AR display. We show that our system's accuracy becomes over 85 percent on average, by using different ASR engines near using an AVSR engine in different noisy environments. We also show in a survey that more than 90 percent of deaf people on average need such system as assistant in portable devices, near using only text or only sign-language... 

Augmented Reality (AR), Automatic Speech Recognition (ASR) and Text-to-Speech Synthesis (TTS) can be used to help people with disabilities. In this paper, we combine these technologies to make a new system for helping deaf people. This system can take the narrator's speech and convert it into a readable text and show it directly on AR display. To improve the accuracy of the system, we use Audio-Visual Speech Recognition (AVSR) as a backup for the ASR engine in noisy environments. In addition, we use the TTS system to make our system more usable for deaf people. The results of testing the system show that its accuracy is over 85 percent on average in different places. Also, the result of a... 

In this paper, a low order recursive linear prediction method and recursive least square as an adaptive filter (LP-RLS) are introduced to predict the speech and the excitation signals. In real-time packet-based communication systems, one major problem is misrouted or delayed packets which results in degraded perceived voice quality. If packets are not available on time, the packet is known as lost packet. The easiest task of a network terminal receiver is to replace silence for the duration of lost speech segments. In a high quality communication system, to avoid quality reduction due to packet loss, a suitable method and/or algorithm is needed to replace the missing segments of speech. The... 

Medical images contain information about vital organic tissues inside of human body and are widely used for diagnoses of disease or for surgical purposes. Image reconstruction is essential for medical images for some applications such as suppression of noise or de-blurring the image to provide images with better quality and contrast. In this paper Kalman filter technique is introduced for medical image reconstruction. This technique is operated in time domain unlike the filtered back projection which operates in frequency domain. Results indicated that as the number of projection increases in both the collected ray sum corrupted by noise and by blurring the quality of reconstructed image... 

We study wireless sensor network (WSN) node placement in an environment where RF signal losses vary with position. This reflects real-world outdoor environments where vegetation and topography cause nonuniform path loss. Many techniques that solve for a variety of objective functions subject to various constraints have previously been proposed for node placement. However, many of these methods make simplifying assumptions such as all nodes having the same transmission range. Our goal is to take the insights and approaches of this previouswork and extend it to real-world environments. The present work assumes we have a map that quantifies the path loss behaviour of the real environment. Based... 

A web-based system is designed and implemented as a risk communication tool to incentivize the public to take seismic risk mitigation measures. Risk denotes the expected monetary and social losses herein. The objective of this system is to raise the awareness of two audience groups, the general public and decision makers, about significant seismic risk in Iran. To address the general public, the system employs the notion of risk perception to put the results of sophisticated earthquake engineering risk analyses into perspective. The system also treats the epistemic uncertainty of user input due to the public's lack of technical knowledge through the notion of entropy in information theory.... 

The primary focus of this article is on enhancing the performance of direct AC/AC converters for their application in Dynamic Voltage Restorer (DVR) through modifications in the configuration of the AC/AC converter interconnection. In the proposed configuration, contrary to conventional setups, the converter's input power is supplied from the load side and applied in series to the grid. This arrangement allows for a substantial increase in the compensating range of the DVR without the need for alterations in the circuit topology of the AC/AC converter. Following the introduction of the converter circuit topology, the proposed configuration is presented. The theoretical analysis is then... 

Medical images contain information about vital organic tissues inside of human body and are widely used for diagnoses of disease or for surgical purposes. Due to vital rule of image reconstruction in medical sciences the corresponding algorithms with better efficiency and higher speed is desirable. Most algorithms in image reconstruction are operated on frequency domain such as filtered back projection. In this paper, a Kalman filter technique which is operated in time domain is introduced for reconstruction of CT medical images. Results indicated that as the number of projection increases in both normal collected ray sum and the collected ray sum corrupted by noise the quality of... 

Accurate Partial Discharge (PD) measurement requires the expansion of the measurement frequency range to Ultra High Frequency (UHF) band. For this it is needed to implement modern techniques when monitoring an important element of power system, such as power transformer. Different kind of experimental models, such as insulation defect models, and the complete transformer windings models are used to simulate the partial insulation failure situations which occur in a real transformer. However, since in these models, some kind of simplifications are employed which may result in an electromagnetic waves (EM) propagation pattern different from what exists in a real transformer and encounter... 

In this paper we have presented a hardware implementation of 32-bit Fault-tolerant ALU (Arithmetic and Logic Unit) which is compared with the current techniques, Residue code, Triple Modular Redundancy (TMR) with single voting and TMR with triplicated voter that are widely used in space application to mitigate the upsets, in terms of area penalty. We consider BCH (Bose, Chaudhuri, and Hocquenghem) codec (encoder, decoder) using the prototyping FPGA (Field Programmable Gate Array). The new implementation of ALU employing BCH code on Spartan-3 FPGA has been provided. The results show that our fault tolerant method has the lowest hardware overhead and it can correct any 5-bit error in any... 

Non-malleable codes are kind of encoding schemes which are resilient to tampering attacks. The main idea behind the non-malleable coding is that the adversary can't be able to obtain any valuable information about the message. Non-malleable codes are used in tamper resilient cryptography and protecting memory against tampering attacks. Several kinds of definitions for the non-malleability exist in the literature. The Continuous non-malleability is aiming to protect messages against the adversary who issues polynomially many tampering queries. The first continuous non-malleable encoding scheme has been proposed by Faust et al. (FMNV) in 2014. In this paper, we propose a new method for proving... 

A new magnetically separable nanocatalyst was successfully synthesized by immobilizing of vanadyl acetylacetonate complex, [VO(acac)2], onto silica coated magnetite nanoparticles previously functionalized with 3-aminopropyltriethoxysilane (3-APTES) and reacted by 5-bromosalicylaldehyde to form Schiff base moiety. The obtained nanocatalyst was characterized by elemental analysis (CHN), FT-IR spectroscopy, Powder X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), inductively coupled plasma optical emission spectrometry (ICP-OES) and thermogravimetric analysis (TGA). Eventually, the resulting nanoparticles were used as catalyst for epoxidation of alkenes and... 

Oxidation of a variety of organic compounds, using Mn-porphyrin, mesotetrakis(4-hydroxyphenyl)porphyrinatomanganese(III), supported onto functionalized silica-coated magnetic nanoparticles via “Click” reaction has been investigated. The heterogeneous catalyst was characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), FT-IR spectroscopy, inductively coupled plasma optical emission spectroscopy (ICP/OES) and energy-dispersive X-ray spectroscopy (EDX). Thermogravimetric analysis (TGA) demonstrated that the prepared catalyst was thermally stable to almost 300 °C, exhibiting high thermostability of the nanocatalyst over a broad range of temperatures. This... 

A non-malleable encoding scheme is a keyless encoding scheme which is resilient to tampering attacks. Such a scheme is said to be continuously secure if the scheme is resilient to attacks containing more than one tampering procedure. Moreover, such a scheme is said to have the T-tamper-detection property if any kind of tampering attack by an adversary chosen from a predetermined class of algorithms T is detected. Faust et al. have introduced a continuous non-malleable encoding scheme based on non-interactive zero-knowledge (NIZK) which is secure in a strong model for which the adversary receives the tampered codeword as a response to its tampering query if the tampered codeword is not... 

In this article, we consider an energy harvesting cooperative network comprised of two data sources and one relay. All nodes transmit based on a predefined slotted Aloha protocol in a random access environment. The main challenge we study is to find how the relay node must share its energy between two sources to optimize their QoS metrics, i.e., throughput and average transmission delay (ATD), separately. Thus, according to our multi-source scenario, we encounter a multi-objective optimization problem (MOOP). Since the relay does not prioritize between two sources, in order to solve the MOOP, we optimize equal-weight linear aggregation of the QoS metrics of two sources. Interestingly, we... 

During recent years centrifugal-based microfluidic devices known as Lab-on-a-CD have attracted a lot of attentions. Applications of these CD-based platforms are ubiquitous in numerous biological analyses and chemical syntheses. Mixing of different species in microscale is one of the essential operations in biochemical applications where this seemingly simple task remains a major obstruction. Application of centrifugal force, however, may significantly improve the flow agitation and mixing, especially when it is combined with the Coriolis force which acts perpendicular to centrifugal force. In this study, mixing process in minichambers located on a rotating platform under a periodic...