Sharif Digital Repository

Metal pH50 and ΔpH50 values were determined and compared for a number of organic systems to select a synergistic system for the separation of Cd from Zn. The largest ΔpH50(Zn-Cd) value was obtained with HRJ-4277 (nonylsalicylic acid)/Cyanex 471X (triisobutyl phosphine sulphide or TIBPS) system and reached 1.53 pH units, indicating excellent separation of Cd from Zn with this system. Shellsol 2046 was chosen as the diluent of the system due to its larger ΔpH50(Zn-Cd) and excellent phase separation compared with other diluents. Distribution isotherms and subsequent McCabe-Thiele diagrams indicate that 99% Cd could be extracted in two stages at pH 3.80 and A / O ratio of 1.5 : 1. The extraction... 

In this study, microstructural aspects that control fracture and deformation resistance of P/M materials are evaluated. Several low-alloy steels were produced under both experimental and commercial conditions for achieving different matrix phases and porosity levels with varying shape factors. A 'porosity map' was constructed and used for a quantified study of the dominant mechanism controlling mechanical behaviors. The role of inclusion gathering and secondary pores, as well as sintering mechanism and alloying method is considered and discussed. The mechanism assessment was performed by using microstructure examination through optical and scanning electron microscopy. The results... 

In regard to highly poisonous effects of cyanide ion, concerns have been focused recently on treatment of such compounds in different ways. Four bacterial strains (C1-C4) capable of using cyanide as nitrogen source were isolated from contaminated gold mine soil samples under alkaline conditions at 30 °C, pH 9.5-10.5, and agitation speed 150 rpm. The gram-negative bacterium C3 (identified as Pseudomonas parafulva NBRC 16636(T) by 16S rRNA gene sequencing) was able to tolerate cyanide up to 500 ppm besides removing 93.5% of 200 ppm cyanide in 13 days which was confirmed by microorganisms growth. The addition of basal salts enhanced the removal efficiency of C3 by 16%. Cyanide removal... 

Simultaneous extraction of zinc and cadmium by a mixture of di-2-ethyl hexyl phosphoric acid (DEHPA) and mono-2-ethyl hexyl phosphoric acid (MEHPA), and the synergistic effect of MEHPA on co-extraction of zinc and cadmium with DEHPA have been investigated. It was shown that the extraction of zinc and cadmium by DEHPA and/or MEHPA can be increased by an increase of pH. The results also illustrate that the pH0.5 of zinc, by increase in MEHPA from 0.1 to 8 vol%, did not vary significantly while that of cadmium varies from 0.63 to 2.4. In other words MEHPA prevents selective extraction of zinc from aqueous media containing both zinc and cadmium. Studies on the selective separation parameter... 

Within this research, we examined the convective flow of a blend of ternary hybrid nanofluids and single nanofluids with a stagnation point caused by a stretched cylinder. The purpose of this study is to investigate the effect of using a ternary hybrid nanofluid instead of a single nanofluid. Water is used as the base fluid in this investigation. The single nanofluid is made of copper and the ternary hybrid nanofluid is made of Molybdenum disulfide, copper, and silver. The impact of the curvature parameter, nanoparticle volume fraction, mixed convection parameter, velocity ratio, shape factor, conjugate number and Eckert number parameters on temperature and velocity profiles has been... 

The present work is concerned with the steady incompressible flow through a parallel plate channel with stretching walls under an externally applied magnetic field. The governing continuity and Navier-Stokes equations are reduced to a fourth order nonlinear differential equation by using vorticity definition and similarity solution transformation. The obtained equations are solved by applying the analytical homotopy perturbation method (HPM). The method is called order of magnitude suggested for simplifying series solution to finite expression that is useful in engineering problems. The results are verified by comparing with numerical solutions and demonstrate a good accuracy of the obtained... 

In the last decade, many potent analytical methods have been utilized to find the approximate solution of nonlinear differential equations. Some of these methods are energy balance method (EBM), homotopy perturbation method (HPM), variational iteration method (VIM), amplitude frequency formulation (AFF), and max-min approach (MMA). Besides the methods mentioned above, the Akbari-Ganji method (AGM) is a highly efficient analytical method to solve a wide range of nonlinear equations, including heat transfer, mass transfer, and vibration problems. In this study, it was constructed the approximate analytic solution for movement of two mechanical oscillators by employing the AGM. In the derived... 

At SCN 2018, Fiore and Pagnin proposed a generic compiler (called “Matrioska”) allowing to transform sufficiently expressive single-key homomorphic signatures (SKHSs) into multi-key homomorphic signatures (MKHSs) under falsifiable assumptions in the standard model. Matrioska is designed for homomorphic signatures that support programs represented as circuits. The MKHS schemes obtained through Matrioska support the evaluation and verification of arbitrary circuits over data signed from multiple users, but they require the underlying SKHS scheme to work with circuits whose size is exponential in the number of users, and thus can only support a constant number of users. In this work, we propose... 

The ride comfort of high-speed trains passing over railway bridges is studied in this paper. A parametric study is carried out using a time domain model. The effects of some design parameters are investigated such as damping and stiffness of the suspension system and also ballast stiffness. The influence of the track irregularity and train speed on two comfort indicators, namely Sperling's comfort index and the maximum acceleration level are also studied. Two types of railway bridges, a simple girder and an elastically supported bridge are considered. Timoshenko beam theory is used for modelling the rail and bridge and two layers of parallel damped springs in conjunction with a layer of mass... 

In this research, the flow of kerosene oil with ternary hybrid nanoparticles on a stretchable exponential surface has been investigated. There is also a discussion about the entropy analysis of the flow of hydromagnetic radiation by the surface. The ternary hybrid nanofluid (THyNF) contains graphene oxide (GO), magnesium oxide (MgO), and zinc oxide (ZnO) as nanoparticles and kerosene oil as a base fluid. Using useful transformations, differential equations with partial derivatives (PDEs) were transformed into ordinary differential equations (ODEs). Then, the ODEs were solved using the RK5th method. Furthermore, the impacts of parameters like radiation parameter ((Formula presented.)),... 

This study delves into the impact of the pre-ionization technique, facilitated by an optimal shunt resistor, on a DPF device operating with deuterium gas. The investigation unveils enhancements in critical parameters within the plasma column environment during the pinch phase, specifically the total and plasmoid hard x-ray yields. Employing a combination of time-resolved detectors, such as plastic scintillator and magnetic probe arrays, alongside time-integrated detectors like pinhole camera, and just by using this technique, the research illustrated an augmented plasma sheath velocity during the axial phase. Notably and other than the enhancement of hard x-ray yield, the optimal pressure of... 

Purpose: The purpose of this paper is to investigate natural convection in a porous wavy-walled enclosure that is including a cylinder cavity in the middle of it and filled with a hybrid nanofluid contains 1-Butanol as the base fluid and MoS2–Fe3O4 hybrid nanoparticles. Design/methodology/approach: The domain of interest is bounded by constant temperature horizontal corrugated surfaces and isothermal vertical flat surfaces. The numerical outputs are explained in the type of isotherms, streamline and average Nusselt number with variations of the Rayleigh number, Hartmann number, nanoparticle shape factor and porosity of the porous medium. For solving the governing equations, the finite... 

Direct Simulation Monte Carlo (DSMC) method is applied to evaluate the performance of a new micro gas sensor (MIKRA) for mass analysis of ammonia in the rarefied gas. In order to simulate a rarefied gas inside the micro gas detector, Boltzmann equation is applied to obtain high precision results. This study performed comprehensive studies to reveal the main mechanism of force generation and applied this for the analysis of the gas mixture. Our findings show that value of generated Knudsen force significantly varies when the percentage of the NH3 varies in the mixture. According to obtained results, the maximum Knudsen force increases when the fraction of the ammonia decreases. Our findings... 

The present article pertains to the assessment of thermoelastic damping (TED) in rectangular nanoplates by incorporation of size effect within the constitutive and heat conduction relations. With the purpose of establishing size-dependent coupled thermoelastic equations, nonlocal elasticity theory and dual-phase-lag heat conduction model are utilized. By considering time-harmonic vibrations, nonclassical frequency equation affected by thermoelastic coupling is derived. By solving this equation and extracting the real and imaginary parts of damped natural frequency via some mathematical operations, an explicit expression for description of TED in circular nanoplates is obtained. With the goal...