Loading...
Search for:
mohandes-dastgerdy--e
0.097 seconds
Total 2769 records
Primary investigation of an innovative method for milk authenticity using two handheld spectrometers and chemometrics: comparison with portable ATR-FTIR
, Article Journal of Food Composition and Analysis ; Volume 133 , 2024 ; 08891575 (ISSN) ; Dashti, A ; Parastar, H ; Kobarfard, F ; Yazdanpanah, H ; Sharif University of Technology
2024
Abstract
This study advocates the use of handheld spectrometers, spanning the visible-near-infrared (Vis-NIR, 400–1000 nm) and near-infrared (NIR, 900–1700 nm) ranges, alongside a portable attenuated total reflection-Fourier transform infrared (ATR-FTIR) instrument, for discerning water adulteration in raw bovine milk. Samples with water adulteration levels ranging from 0 % to 30 % underwent direct analysis without additional preparation. Principal component analysis was utilized for differentiation, while quantification was achieved using partial least squares regression (PLSR) and radial basis function-artificial neural network (ANN) models. The ATR-FTIR instrument displayed remarkable performance,...
Zoning of Dust Hotspots and Investigation of their Formation Factors
, M.Sc. Thesis Sharif University of Technology ; Tajrishy, Massoud (Supervisor)
Abstract
Identification of dust storm hotspots using high resolution 1 km MODIS Aerosol Optical Depth (AOD) data obtained by MAIAC algorithm for a region including Iran and its neighbors, is one of the objectives of the present study. By implementing three important statistics on AOD and averaging over the last decade time period (2009-2019), dust sources of Iran, Iraq, Syria, Saudi Arabia, Oman, Afghanistan, and Pakistan were specified. These statistics include frequency of occurrence AOD>0.3, mean and coefficient of variation of aerosol optical depth. The membership rank of source zones in the set of hotspot areas has been obtained by applying the fuzzy logic approach on the three mentioned layers....
Injectable hydrogels based on oxidized alginate-gelatin reinforced by carbon nitride quantum dots for tissue engineering
, Article International Journal of Pharmaceutics ; Volume 602 , 2021 ; 03785173 (ISSN) ; Salavati Niasari, M ; Mohandes, F ; Sharif University of Technology
Elsevier B.V
2021
Abstract
Stem cell treatment is promising in the various disorders treatment, but its effect is confined by the adverse conditions in the damaged tissues. The utilization of hydrogels has been suggested as a procedure to defeat this issue by developing the engraftment and survival of injected stem cells. Specifically, injectable hydrogels have drawn much attention due to their shape adaptability, ease of use, and the capability to reach body parts that are hard to access. In this study, the thermosensitive injectable hydrogels based on oxidized alginate, gelatin, and carbon nitride quantum dots (CNQDs) have been fabricated for tissue engineering. The mechanical characteristics of the nanocomposite...
In vitro bioactivity and biocompatibility of magnesium implants coated with poly(methyl methacrylate) - bioactive glass composite
, Article Materials Today Communications ; Volume 33 , 2022 ; 23524928 (ISSN) ; Jafari, H ; Pishbin, F ; Mohandes, F ; Simchi, A ; Sharif University of Technology
Elsevier Ltd
2022
Abstract
Magnesium (Mg) and its alloys have proved promising as biodegradable candidates for the repair of bone tissue. Despite the encouraging bio-related properties of Mg, its high corrosion rate in contact with body fluids still presents a major challenge. An efficient approach to address this issue is to provide a protective coating on Mg. The present research evaluates, for the first time, in vitro bioactivity and biocompatibility of a novel multifunctional composite coating based on poly(methyl methacrylate) (PMMA) biopolymer and bioactive glass (BG) particles on Mg-based implant. Electrophoretic deposition (EPD) was utilized to obtain this coating from a bi-component suspension. Coatings’...
3D self-supporting mixed transition metal oxysulfide nanowires on porous graphene networks for oxygen evolution reaction in alkaline solution
, Article Journal of Electroanalytical Chemistry ; Volume 893 , 2021 ; 15726657 (ISSN) ; Mohammadi, R ; Mojaddami, M ; Mohandes, F ; Simchi, A ; Sharif University of Technology
Elsevier B.V
2021
Abstract
Precious metal-free electrocatalysts based on two-dimensional nanomaterials have efficiently been used for oxygen evolution reaction; however, the low activity and stability of these materials as compared with noble metals are still distractive. We present a novel and high-performance electrocatalyst based on nanowires of mixed transition metal oxysulfide supported by three-dimensional highly porous graphene networks. Electrochemical studies indicated that the high electron transport medium of nanowires and bilayer graphene nanosheets as well as their high active surface area promote the kinetics of oxygen evolution reaction (OER). A quite small overpotential of 260 mV at the current density...
The impact of zirconium oxide nanoparticles content on alginate dialdehyde-gelatin scaffolds in cartilage tissue engineering
, Article Journal of Molecular Liquids ; Volume 335 , 2021 ; 01677322 (ISSN) ; Salavati Niasari, M ; Mohandes, F ; Firouzi, Z ; Mousavi, S.-D ; Sharif University of Technology
Elsevier B.V
2021
Abstract
The desire to regenerate and repair native tissues can be immediately performed by multiple tissue engineering procedures. Gelatin and alginate are biocompatible and biodegradable polymers. The addition of ZrO2 nanoparticles (NPs) into the alginate-gelatin hydrogel is considered to improve mechanical and chemical properties. Therefore, nanocomposite hydrogels have been manufactured by the freeze-drying procedure utilizing oxidized alginate-gelatin with ZrO2 NPs as a reinforcement. The fabricated nanocomposite hydrogels were character-ized by FTIR, FESEM, and rheometer. The hydrogels containing a higher ZrO2 NPs content (1.5%) have better mechanical properties than the hydrogels without NPs....
How biomimetic nanofibers advance the realm of cutaneous wound management: the state-of-the-art and future prospects
, Article Progress in Materials Science ; Volume 145 , 2024 ; 00796425 (ISSN) ; Soleimani, F ; Lotfi, R ; Mohandes, F ; Simchi, A ; Razavi, M ; Sharif University of Technology
2024
Abstract
Skin acts as a protective barrier for the underlying organs against external events such as irradiation of ultraviolet rays, incursion of harmful pathogens, and water evaporation. As the skin is constantly liable to damage, the wound-healing process is vital to the survival of all organisms. Materials design and development for enhanced wound healing and skin tissue regeneration have been found highly valuable in recent years. A wide range of materials and structures, including dressings and tissue-engineered substitutes composed of synthetic and/or natural biopolymers and their composites have been developed and examined. Although some have clinically been proven and are available in the...
Multilayered mesoporous composite nanostructures for highly sensitive label-free quantification of cardiac troponin-i
, Article Biosensors ; Volume 12, Issue 5 , 2022 ; 20796374 (ISSN) ; Amidian, M. A ; Sheybanikashani, S ; Mahdavi, H ; Alimohammadi, H ; Syedmoradi, L ; Mohandes, F ; Zarrabi, A ; Tamjid, E ; Omidfar, K ; Simchi, A ; Sharif University of Technology
MDPI
2022
Abstract
Cardiac troponin-I (cTnI) is a well-known biomarker for the diagnosis and control of acute myocardial infarction in clinical practice. To improve the accuracy and reliability of cTnI electrochemical immunosensors, we propose a multilayer nanostructure consisting of Fe3O4-COOH labeled anti-cTnI monoclonal antibody (Fe3O4-COOH-Ab1 ) and anti-cTnI polyclonal antibody (Ab2 ) conjugated on Au-Ag nanoparticles (NPs) decorated on a metal–organic framework (Au-Ag@ZIF-67-Ab2 ). In this design, Fe3O4-COOH was used for separation of cTnI in specimens and signal amplification, hierarchical porous ZIF-67 extremely enhanced the specific surface area, and Au-Ag NPs synergically promoted the conductivity...
Glucose cross-linked hydrogels conjugate HA nanorods as bone scaffolds: Green synthesis, characterization and in vitro studies
, Article Materials Chemistry and Physics ; Volume 242 , 2020 ; Shafiei, N ; Mohandes, F ; Dolatyar, B ; Zandi, N ; Zeynali, B ; Simchi, A ; Sharif University of Technology
Elsevier Ltd
2020
Abstract
In the expanding field of tissue engineering (TE), improvement of biodegradability and osteoconductivity of biomaterials are required. The use of non-toxic reagents during manufacturing processes is also necessary to decrease toxicity and increase cell viability in vivo. Herein, we present a novel approach to prepare hydroxyapatite (HA) nanorods from sea bio-wastes through a green and eco-friendly wet-chemical processing for bone TE. Highly porous natural polymer-ceramic nanocomposites made of HA, gelatin (Ge) and carboxymethyl cellulose (CMC) hydrogels are then introduced. It was found that cross-linking of the hydrogel matrix by glucose as a green reagent affected all characteristics of...
Magneto-fluorescent contrast agents based on carbon Dots@Ferrite nanoparticles for tumor imaging
, Article Journal of Magnetism and Magnetic Materials ; Volume 561 , 2022 ; 03048853 (ISSN) ; Dehghani, H ; Angizi, S ; Ramedani, A ; Dolatyar, B ; Ramezani Farani, M ; Müllen, K ; Simchi, A ; Sharif University of Technology
Elsevier B.V
2022
Abstract
Bimodal magnetic-fluorescent materials for diagnostic imaging needs surface-engineered nanoparticles with great biosafety, pronounced colloidal stability, high magnetic moments, and strong photoluminescence (PL) emission. This work presents polymer-coated nanoparticles (PCNPs) based on manganese ferrites covered with a thin shell of nitrogen-doped carbon dots for magnetic-resonance and fluorescent dual mode imaging of cancerous tumors in vivo. An in situ thermolysis of metal oxalates and phenylenediamine in diphenyl ether allows for the facile synthesis of hybrid magneto-fluorescent nanoparticles. They possess an average size of 55 ± 5 nm with strong and excitation-independent PL emission at...
Microstructure and color stability of calcium silicate-based dental materials exposed to blood or platelet-rich fibrin
, Article Clinical Oral Investigations ; Volume 27, Issue 3 , 2023 , Pages 1193-1206 ; 14326981 (ISSN) ; Tahun, I. A ; Tahan, S. S ; Mohandes, F ; Nekoofar, M. H ; Dummer, P. M. H ; Sharif University of Technology
Springer Science and Business Media Deutschland GmbH
2023
Abstract
Objectives: To investigate the effects of blood and platelet-rich fibrin (PRF), commonly used scaffolds in regenerative endodontic treatment (RET), on the hydration, microstructure, and color stability of three hydraulic calcium silicate cements (HCSCs), OrthoMTA, RetroMTA, and TotalFill-BC-RRM. Materials and methods: The HCSCs were prepared and placed into polyethylene molds and transferred to Eppendorf tubes containing PRF, blood, or PBS and then incubated for 1 week or 1 month. The microstructure and hydration of the cements were studied by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD). The chromatic alteration of materials was...
An electroconductive, thermosensitive, and injectable chitosan/pluronic/gold-decorated cellulose nanofiber hydrogel as an efficient carrier for regeneration of cardiac tissue
, Article Materials ; Volume 15, Issue 15 , 2022 ; 19961944 (ISSN) ; Maleki Jirsaraei, N ; Simchi, A ; Mohandes, F ; Emami, Z ; Fassina, L ; Naro, F ; Conti, B ; Barbagallo, F ; Sharif University of Technology
MDPI
2022
Abstract
Myocardial infarction is a major cause of death worldwide and remains a social and healthcare burden. Injectable hydrogels with the ability to locally deliver drugs or cells to the damaged area can revolutionize the treatment of heart diseases. Herein, we formulate a thermo-responsive and injectable hydrogel based on conjugated chitosan/poloxamers for cardiac repair. To tailor the mechanical properties and electrical signal transmission, gold nanoparticles (AuNPs) with an average diameter of 50 nm were physically bonded to oxidized bacterial nanocellulose fibers (OBC) and added to the thermosensitive hydrogel at the ratio of 1% w/v. The prepared hydrogels have a porous structure with open...
Dose-dependent effects of nanoscale graphene oxide on reproduction capability of mammals
, Article Carbon ; Volume 95 , December , 2015 , Pages 309-317 ; 00086223 (ISSN) ; Ghaderi, E ; Hashemi, E ; Akbari, E ; Sharif University of Technology
Elsevier Ltd
2015
Abstract
In vivo dose-dependent effects of nanoscale graphene oxide (NGO) sheets on reproduction capability of Balb/C mice were investigated. Biodistribution study of the NGO sheets (intravenously injected into male mice at dose of ∼2000 μg/mL or 4 mg/kg of body weight) showed a high graphene uptake in testis. Hence, in vivo effects of the NGO sheets on important characteristics of spermatozoa (including their viability, morphology, kinetics, DNA damage and chromosomal aberration) were evaluated. Significant in vivo effects was found at the injected concentrations ≥200 μg/mL after (e.g., ∼45% reduction in sperm viability and motility at 2000 μg/mL). Observation of remarkable DNA fragmentations and...
Accelerated differentiation of neural stem cells into neurons on ginseng-reduced graphene oxide sheets
, Article Carbon ; Volume 66 , January , 2014 , Pages 395-406 ; Ghaderi, E ; Abouei, E ; Hatamie, S ; Ghasemi, E ; Sharif University of Technology
2014
Abstract
Asian red ginseng was used for green reduction of chemically exfoliated graphene oxide (GO) into reduced graphene oxide (rGO). The reduction level and electrical conductivity of the ginseng-rGO sheets were comparable to those of hydrazine-rGO ones. Reduction by ginseng resulted in repairing the sp 2 graphitic structure of the rGO, while hydrazine-rGO showed more defects and/or smaller aromatic domains. The ginseng-rGO sheets presented a better stability against aggregation than the hydrazine-rGO ones in an aqueous suspension. Whilst the hydrophobic hydrazine-rGO films exhibited no toxicity against human neural stem cells (hNSCs), the hydrophilic GO and ginseng-rGO films (as more...
Contested framings and policy controversies: Analysing biosafety policy-making in Iran
, Article Science and Public Policy ; Volume 40, Issue 5 , 2013 , Pages 616-627 ; 03023427 (ISSN) ; Millstone, E ; Sharif University of Technology
2013
Abstract
Vigorous debates have taken place within and between many countries about regulatory policy regimes covering the assessment and approval of genetically modified (GM) crops. In Iran, a very vigorous and hotly contested policy debate concerning legislation covering GM crops occurred between 2004 and 2009, but it was confined within government circles with almost no public discussion. This paper analyses the Iranian policy-making process in the period 2006-9. It explains how and why a stalemate arose in disputes between ministries and departments. The chosen analytical framework draws mainly on the regulation of technological risks and the analysis of public policy-making. It deploys the...
On the possible volumes of μ-way latin trades
, Article Aequationes Mathematicae ; Volume 63, Issue 3 , 2002 , Pages 303-320 ; 00019054 (ISSN) ; Billington, E. J ; Bryant, D. E ; Mahmoodian, E. S ; Sharif University of Technology
Birkhauser Verlag Basel
2002
Abstract
A μ-way latin trade of volume s is a set of μ partial latin rectangles (of inconsequential size) containing exactly the same s filled cells, such that if cell (i, j) is filled, it contains a different entry in each of the μ partial latin rectangles, and such that row i in each of the μ partial latin rectangles contains, set-wise, the same symbols and column j, likewise. In this paper we show that all μ-way latin trades with sufficiently large volumes exist, and state some theorems on the non-existence of μ-way latin trades of certain volumes. We also find the set of possible volumes (that is, the volume spectrum) of μ-way latin trades for μ = 4 and 5. (The case μ = 2 was dealt with by Fu,...
The three-way intersection problem for latin squares
, Article Discrete Mathematics ; Volume 243, Issue 1-3 , 2002 , Pages 1-19 ; 0012365X (ISSN) ; Billington, E. J ; Bryant, D. E ; Mahmoodian, E. S ; Sharif University of Technology
2002
Abstract
The set of integers k for which there exist three latin squares of order n having precisely k cells identical, with their remaining n2 -k cells different in all three latin squares, denoted by I3[n], is determined here for all orders n. In particular, it is shown that I3[n] = {0,.,n2 -15}U [n2 - 12,n2-9,n2], for n ≫8. ©2002 Eisevier Science B.V. All rights reserved
Integration of spatial fuzzy clustering with level set for segmentation of 2-D angiogram
, Article IECBES 2014, Conference Proceedings - 2014 IEEE Conference on Biomedical Engineering and Sciences: "Miri, Where Engineering in Medicine and Biology and Humanity Meet", 8 December 2014 through 10 December 2014 ; December , 2015 , Pages 309-314 ; 9781479940844 (ISBN) ; Zahedi, E ; Fatemizadeh, E ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2015
Abstract
Coronary angiography is a vital instrument to detect the prevailing of vascular diseases, and accurate vascular segmentation acts a crucial role for proper quantitative analysis of the vascular tree morphological features. Level set methods are popular for segmenting the coronary arteries, but their performance is related to suitable start-up and optimum setting of regulating parameters, essentially done manually. This research presents a novel fuzzy level set procedure with the objective of segmentation of the coronary artery tree in 2-D X-ray angiography as automatically. It is clever to clearly develop from the early segmentation with spatial fuzzy grouping. The adjusting parameters of...
Deep relative attributes
, Article 13th Asian Conference on Computer Vision, ACCV 2016, 20 November 2016 through 24 November 2016 ; Volume 10115 LNCS , 2017 , Pages 118-133 ; 03029743 (ISSN); 9783319541921 (ISBN) ; Noury, E ; Adeli, E ; Sharif University of Technology
Springer Verlag
2017
Abstract
Visual attributes are great means of describing images or scenes, in a way both humans and computers understand. In order to establish a correspondence between images and to be able to compare the strength of each property between images, relative attributes were introduced. However, since their introduction, hand-crafted and engineered features were used to learn increasingly complex models for the problem of relative attributes. This limits the applicability of those methods for more realistic cases. We introduce a deep neural network architecture for the task of relative attribute prediction. A convolutional neural network (ConvNet) is adopted to learn the features by including an...
A public code for astrometric microlensing with contour integration
, Article Monthly Notices of the Royal Astronomical Society ; Volume 505, Issue 1 , 2021 , Pages 126-135 ; 00358711 (ISSN) ; Khalouei, E ; Bachelet, E ; Sharif University of Technology
Oxford University Press
2021
Abstract
We present the first public code for the calculation of the astrometric centroid shift occurring during microlensing events. The computation is based on the contour integration scheme and covers single and binary lensing of finite sources with arbitrary limb darkening profiles. This allows for general detailed investigations of the impact of finite source size in astrometric binary microlensing. The new code is embedded in version 3.0 of vbbinarylensing, which offers a powerful computational tool for extensive studies of microlensing data from current surveys and future space missions. © 2021 The Author(s) Published by Oxford University Press on behalf of Royal Astronomical Society