Sharif Digital Repository

In this paper, a new analytical method is presented that can be used to determine the behavior of particular steel beam-to-column extended end plate connection in linear and nonlinear regions. A common means of forming a rigid joint between a universal beam and column is to weld an end plate to the beam end and then to bolt it to the column. A physically based analytical method that can predict the behavior of bolted and extended end plate eave connections, using the connection dimensions as input, is presented. This article demonstrates an analytical procedure for the establishment of elastic and plastic parts of the M-χ curve of this form of connection. An analytical method is proposed for... 

In this paper, we propose utilizing multiple optical phase conjugate (OPC) modules along fiber spans, in order to improve the performance of coherent optical orthogonal frequency division multiplexing (CO-OFDM) communication systems in long-haul fiber-optic channels. The role of OPC in CO-OFDM systems is investigated by formulating the four-wave mixing (FWM) process generated along a CO-OFDM with two and three OPCs. Analytical results reveal that increasing the number of OPC modules reduces the average FWM power along the transmission link and as a result mitigates the degrading effect of interaction between amplified spontaneous emission noise and FWM. The proposed schemes have also been... 

In this paper, we propose an iterative block equalizer for long-haul Coherent Optical Orthogonal Frequency Division Multiplexing (CO-OFDM) communication systems. The proposed scheme is based on a soft Minimum Mean-Squared Error (MMSE) iterative block equalizer. Two different channel estimation methods are also discubed. The performance and computational complexity of the proposed iterative equalization and channel estimation techniques are evaluated as well. The obtained Bit Error Rate (BER) performance reveal that the iterative equalizer outperforms the linear equalizers by almost two orders of magnitude  

In this paper, we present a mathematical model for the idea of using more than one optical phase conjugate (OPC) module for coherent optical orthogonal frequency division multiplexing (CO-OFDM) systems in long-haul fiber optic channels. The four-wave mixing (FWM) formulation is derived for three different scenarios in which different numbers of OPC modules are used. The simulation results reveal that using more than one OPC modules leads to a much better BER performance operating on a typical OFDM system  

In this study, the authors evaluate the performance of asynchronous optical multi-carrier code division multiple access (MC-CDMA) for intensity modulated/direct detection systems to be used in next-generation optical access networks. The proposed system employs Gold sequence in frequency-domain to provide asynchronous resource sharing. In long-reach passive optical networks, fibre impairments degradation to the performance of ordinary optical CDMA can be avoided by frequency-domain digital compensation methods in the proposed MC-CDMA. In comparison with orthogonal frequency division multiple access, peak-to-average power ratio in the proposed MC-CDMA is reduced and asynchronous resource... 

In this paper, we present a design methodology with implementational insight and evaluate the performance of a multicarrier code-division multiple access (MC-CDMA) system using intensity modulation/direct detection scheme suitable for an indoor visible light communication (VLC) environment. The proposed system is a CDMA system based on an orthogonal frequency division multiplexing (OFDM) platform. To overcome the light-dimming issue, we use a newly proposed methodology, namely, polarity reversed optical OFDM (PRO-OFDM). A unipolar signal is either added to the minimum current or subtracted from the maximum current in the LED linear current range to provide various amounts of dimming. The... 

In Cognitive Radio (CR), in order to avoid interference in the Primary Users (PU), some subcarriers need to be deactivated. In systems based on Multicarrier Code Division Multiple Access (MC-CDMA), this causes losing orthogonality among different spreading codes, leading to poor Bit Error Rate (BER) performance. The performance of such system can be improved by using Generalized Hadamard Codes (GHC) instead of conventional Hadamard codes which avoids the loss of orthogonality. This is due to the fact that unlike conventional Hadamard codes, GHC are conjectured to exist for any arbitrary length. In this paper, we propose using a novel spreading code, namely, GHC for synchronous MC-CDMA in CR... 

For the present article, a pulsating heat pipe (PHP) is fabricated and tested experimentally by bending a copper tube. The effects of working fluid, heat input, charging ratio, inclination angle, magnets location, and ferrofluid (magnetic nanofluid) volumetric concentration have been investigated on the thermal performance of this PHP. Experimental results show that using ferrofluid as a working fluid improves the thermal performance of the PHP significantly. Moreover, applying a magnetic field on a ferrofluidic PHP reduces its thermal resistance. By changing the inclination angle of the PHP from vertical mode to angles close to the horizontal mode, the present PHP has a constant and... 

In this article, the control of an electrohydrodynamic 3D printer is studied. The proposed controller has a hybrid piecewise linear feedback form which is designed based on a hybrid model of the printer. The hybrid model is obtained via a gray box identification process whose structure is proposed utilizing the results of the finite element simulation of the printer within the COMSOL Multiphysics software. The asymptotic stability of the hybrid control combined with a hybrid observer is proven using the Lyapunov theory. In addition, the obtained control is applied to the finite element model of the printer to check its performance which shows the success of the controlled system in tracking... 

Chatter is a limiting factor in machining systems with adverse effects for workpiece surface, tool and machine life and material removal rate. Proper modelling of this phenomenon requires that the dynamic characteristics of the machining system is known. It is common to obtain the dynamic of the system by modal tests in stationary condition. However, the vibration characteristics of a machine change between its operating and resting mode. The goal of this work is to study vibrations in boring using the vibrational characteristic in operational conditions using the operating deflection shape method. In this paper, vibration characteristics of the in the boring bar is obtained by both modal... 

A novel voltammetric biosensor based on nano-TiO2/nafion/carbon nanoparticles modified glassy carbon electrode (TiO2/N/CNP/GCE) was developed for the determination of dobutamine (DBA). Characterization of the surface morphology and property of TiO2/N/CNP layer was carried out by the scanning electron microscopy and atomic force microscopy. The electrochemical performance of the modified electrode was investigated by means of the cyclic voltammetry, differential pulse voltammetry and electrochemical impedance spectroscopy techniques. Effective experimental variables, such as the scan rate, pH of the supporting electrolyte, drop size of the casted modifier suspension and accumulation... 

The performance of an HTPB/N2O hybrid motor was experimentally investigated. A hybrid motor was designed and manufactured in a laboratory with the purpose of studying the effects of various parameters on the motor's performance, including fuel regression rate and specific impulse. A series of tests were conducted to find a correlation between the fuel regression rate and the oxidizer's mass flux. The effects of chamber's pressure on the regression rate as well as other performance parameters were investigated. While the burning rate did not change dramatically, both the efficiency and ISP of the motor increased. The local fuel regression rate and the fuel port were also calculated. In... 

The aim of this study was to investigate the applicability of acoustic emission (AE) technique to evaluate delamination crack in glass/epoxy composite laminates under quasi-static and fatigue loading. To this aim, double cantilever beam specimens were subjected to mode I quasi-static and fatigue loading conditions and the generated AE signals were recorded during the tests. By analyzing the mechanical and AE results, an analytical correlation between the AE energy with the released strain energy and the crack growth was established. It was found that there is a 3rd degree polynomial correlation between the crack growth and the cumulative AE energy. Using this correlation the delamination... 

A stable composite film of silver nanoparticles (Ag NPs) decorated on reduced graphene oxide is prepared by a two-step simple procedure. The surface morphology of the modified electrode is characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM) techniques. The electrochemical behavior of tinidazole (TNZ) on the surface of the modified electrode is investigated by linear sweep voltammetry and electrochemical impedance spectroscopy. The prepared composite electrode acts as a highly sensitive platform for the voltammetric determination of TNZ, leading to a significant increase in the reduction peak current of TNZ. The effects of experimental parameters such as the... 

Immiscible gas injection is one of the most common enhanced oil recovery methods used under various reservoir conditions. In this work, the immiscible recycle gas injection, as an EOR scenario for improving recovery efficiency in one of the south-west Iranian oil reservoirs, is simulated by a commercial simulator, ECLIPSE. The reservoir fluid is light oil, with an API of 43. The oil bearing formations are carbonate, and so a dual porosity/dual permeability behavior was chosen for better representation of the fracture system. Different sensitivity analyses with respect to several parameters like the number and location of injection/production wells, production/injection rate, completion... 

Pentamode metamaterials are a type of extremal designer metamaterials, which are able to demonstrate extremely high rigidity in one direction and extremely high compliance in other directions. Pentamodes can, therefore, be considered as building blocks of exotic materials with any arbitrarily selected thermodynamically admissible elasticity tensor. The pentamode lattices can then be envisioned to be combined to construct intermediate extremal materials, such as quadramodes, trimodes, and bimodes. In this study, we constructed several primary types of anisotropic pentamode lattices (with midpoint positioning of 10%, 15%, 20%, 25%, 30%, 35%, and 42% of the main unit cell diagonal) and then... 

A new strategy for enhancing the efficiency and reducing the production cost of TiO 2 solar cells by design of a new formulated TiO 2 paste with tailored crystal structure and morphology is reported. The conventional three- or four-fold layer deposition process was eliminated and replaced by a single layer deposition of TiO 2 compound. Different TiO 2 pastes with various crystal structures, morphologies and crystallite sizes were prepared by an aqueous particulate sol-gel process. Based on simultaneous differential thermal (SDT) analysis the minimum annealing temperature to obtain organic-free TiO 2 paste was determined at 400°C, being one of the lowest crystallization temperatures of TiO 2... 

In this paper, we present and discuss the physical implementation and testing of a Spectrally-Encoded Spread-Time Code Devision Multiple Access (SE/ST-CDMA) transceiver. The proposed design is suitable for multiple-access and anti jamming wireless communication systems. The design and implementation takes into account the ability to automatically detect and mitigate tone jammers by altering the corresponding Gold sequence codes assigned uniquely to each user and setting the corresponding code's chip to zero. A simple real-time anti jamming mechanism capable of dealing with frequency hopping jammers is also proposed. The simulation results are provided in terms of Bit Error Rate (BER) versus... 

Herein, we demonstrate a facile low temperature chemical bath deposition approach to deposit a light scattering layer on a nanostructured mesoporous TiO2 bottom layer in a dye-sensitized solar cell architecture. Large TiO2 nanoparticles were formed on the top surface of photoanode electrodes via hydrolysis of TiCl4 at 70 °C. We controlled the size and agglomeration of these TiO2 nanoparticles by altering the concentration of TiCl4 in the chemical bath during the hydrolysis process. Electron microscope images revealed that mono-dispersed scattering particles having uneven surfaces with diameters between 100 to 300 nm formed on the mesoporous titania layer. The scattering behavior of the...