Sharif Digital Repository

Structures with inappropriate distributions of strength and stiffness have performed poorly in recent earthquakes, and most of the observed collapses have been related to some extent to configuration problems or a wrong conceptual design. Shear building models of multi-story structures are considered in this study and are subjected to a group of severe earthquakes. It is shown that the strength distribution patterns suggested by the seismic codes do not lead to a uniform distribution and minimum amount of ductility, drift, and damage. A new pattern is proposed that is a function of the period of the structure and the target ductility. An iterative approach is also developed to determine the... 

The Sonogashira reaction using nickel ferrite nanoparticles as catalyst and under copper-free conditions was investigated in water as a green solvent. Various types of aryl and alkyl halides were successfully coupled with phenyl acetylene under the optimized reaction conditions with very good to excellent yields at a short time. The catalyst is easily recoverable and can be reused for several runs with a good turnover number  

This work reports the improved procedure for the preparation of bis(indolyl)methanes from the corresponding aldehydes and indole. Anhydrous copper(II) sulfate efficiently promotes the chemoselective synthesis of bis(indolyl)methanes via electrophilic substitution reactions of indole with aldehydes. The reaction was carried out in refluxing dichloromethane or microwave-assisted solvent-free conditions. The adducts were produced in good to excellent yields  

Blur identification is one important part of image restoration process. Linear motion blur is one of the most common degradation functions that corrupts images. Since 1976, many researchers tried to estimate motion blur parameters and this problem is solved in noise free images but in noisy images improvement can be done when image SNR is low. In this paper we have proposed a method to estimate motion blur parameters such as direction and length using Radon transform and Feed-Forward back propagation neural network for noisy images. To design the desired neural network, we used Weierstrass approximation theorem and Steifel reference Sets. The experimental results showed algorithm precision... 

We report a simple, fast, efficient and benign procedure for solvent-free microwave-assisted one-pot synthesis of symmetrical 4H-pyran-4-ones in the presence of polyphosphoric acid or diphosphorous pentoxide. Various 4H-pyran-4-ones were prepared using this very simple and fast green protocol. ©2007 Sociedade Brasileira de Química  

Given a non-commutative finite dimensional F-central division algebra D, we study conditions under which every non-abelian maximal subgroup M of GL n(D) contains a non-cyclic free subgroup. In general, it is shown that either M contains a non-cyclic free subgroup or there exists a unique maximal subfield K of Mn(D) such that NGLn<(D) (K*)=M, K* M, K/F is Galois with Gal(K/F) ≅ M/K*, and F[M]=Mn(D). In particular, when F is global or local, it is proved that if ([D:F],Char(F))=1, then every non-abelian maximal subgroup of GL 1(D) contains a non-cyclic free subgroup. Furthermore, it is also shown that GLn(F) contains no solvable maximal subgroups provided that F is local or global and n ≥ 5. ©... 

Let D be an F-central non-commutative division ring. Here, it is proved that if GL n(D) contains a non-abelian soluble maximal subgroup, then n = 1, [D : F] < ∞, and D is cyclic of degree p, a prime. Furthermore, a classification of soluble maximal subgroups of GL n(F) for an algebraically closed or real closed field F is also presented. We then determine all soluble maximal subgroups of GL 2(F) for fields F with Char F ≠ 2  

In this study nickel ferrite magnetic nanoparticles were applied as an efficient and reusable catalyst in the four-component synthesis of substituted pyrroles under neat conditions. The reaction was conducted using various amounts of catalyst at different temperatures and finally, application of 5 mol% of catalyst at 100 °C was determined as the optimum reaction condition. Results showed that nickel ferrite nanoparticles could catalyze the reaction at relatively short times (3-4 h) with high to excellent yields (70-96%). The catalyst could be recovered easily using an external magnetic field and reused nine times without any significant activity lost  

Organic-inorganic hybrid halide perovskite materials have been most attractive for wide range of optoelectronic applications. Investigating the photo-response in these devices will be very useful to understanding cell performance in different conditions and applications. For understanding non-linearity photo-response we use the Bathocuproine (BCP) as blocking layer in two interfaces of inverted perovskite solar cell (FTO/NiO/BCP/Perovskite/PCBM/Au and FTO/NiO/Perovskite/PCBM/BCP/Au). Employing thick BCP layer (≈15 nm) caused s-shaped JV curve due to charge accumulation at interfaces. The nonlinearity effect was also explored for devices with s-shaped JV and established that device parameters... 

In this paper a new least mean square (LMS) based adaptive weighting algorithm is proposed. It is appropriate for antenna array systems with moving targets and mobile applications. The essential goal of this algorithm is to reduce the complexity of weighting process and to decrease the time needed for adjusting the antenna radiation pattern. The main lobe of antenna will be adjusted in the direction of desired signal (main signal) and nulls pointed in the direction of undesired signals (interference signals). By predicting the relative velocity of source, the next location of the source will be estimated and the array weights will be determined using LMS algorithm before arriving to the new... 

Reducing the computational complexity as well as convergence time is the main task of adaptive antenna array processing. This article proposes an improved algorithm for estimating the weights of adaptive array elements based on Constant Modulus Algorithm (CMA). In this new type of algorithm, those weights that have higher effect on the radiation pattern will be estimated and antenna pattern will be adjusted by changing these weights. In this research, 3 new algorithms are proposed. By simulating these algorithms and comparing them with conventional full weight CMA, finally new algorithm that has a reduced complexity and an acceptable performance at different signal to noise ratios (SNRs) is... 

Herein, we demonstrate a facile low temperature approach to prepare a gel polymer electrolyte (GPE) based on the triiodide/iodide redox couple in a quasi-solid-state dye-sensitized solar cell (DSSC). Only one polymeric agent (i.e., hydroxypropyl cellulose (HPC)) is used for the preparation of a non-volatile GPE system for the standard liquid electrolyte containing 1-methyl-3-propylimidazolium iodide (MPII). The prepared GPE completely penetrates into a TiO2 photoanode at room temperature due to the uniform distribution of Ti, Ru and I elements in the cross-section of the electrode, forming an interpenetrating GPE/TiO2 network to access all dye molecules. The GPE with the optimum HPC : MPII... 

This paper addresses a bi-level mixed-integer nonlinear programming (MINLP) model for the competitive facility location problem in a closed-loop supply chain (CLSC), in which a firm (i.e., leader) aims at entering a market by locating new distribution and collection facilities, where a competitor (i.e., follower) already exists. The goal is to find the location and attractiveness of each facility going to be established by the leader who seeks to maximize its profit while also taking the follower's response into account. The attractiveness of each facility is a function of integer variables related to the facility's characteristics. Customer behavior is considered to be probabilistic based... 

Gold nanoparticles supported on poly ionic-liquid magnetic nanoparticles (MNP@PIL@Au) were synthesized by reduction of HAuCl4 with sodium borohydride. The synthesized catalyst was characterized using by AAS, TEM, FT-IR, EDS, TGA and XRD techniques. The performance of the synthesized catalyst was investigated in the reduction of nitroarenes with NaBH4. The reaction was carried out for various nitroarenes in water and mild conditions with high yields. The catalyst selectivity for the reduction of nitro group in the presences of other functional groups such as halides and alkynes was fairly well. The recycling of the catalyst was done 8 times without any significant loss of its catalytic... 

A new heterogeneous copper catalyst was synthesized by immobilization of copper ions onto magnetic nanoparticles with a new ligand based on triazole. The catalyst was characterized using scanning and transmission electron microscopies, atomic absorption and Fourier transform infrared spectroscopies, and thermogravimetric, elemental and energy-dispersive X-ray analyses. The results confirmed that a good level of organic groups was immobilized on the magnetic nanoparticles. Huisgen cycloaddition reaction was chosen as a model reaction for the investigation of catalyst activity under green conditions. Phenylacetylene and benzyl bromide derivatives were used for the synthesis of triazoles. The... 

N-Benzyl-DABCO-ammonium tribromide was found to be an efficient and recyclable reagent for the deprotection of dithioacetals in dichloromethane/ methanol at room temperature. The reaction can be performed cleanly, in short time, and in high yield. Copyright © Taylor & Francis Group, LLC  

We introduce a new robust simulation optimization method in which the probability of occurrence of uncertain parameters is considered. It is assumed that the probability distributions are unknown but historical data are on hand and using φ-divergence functionality the uncertainty region for the uncertain probability vector is defined. We propose two approaches to formulate the robust counterpart problem for the objective function estimated by Kriging. The first method is a minimax problem and the second method is based on the chance constraint definition. To illustrate the methods and assess their performance, numerical experiments are conducted. Results show that the second method obtains... 

In this article, a new algorithm for rather expensive simulation problems is presented, which consists of two phases. In the first phase, as a model-based algorithm, the simulation output is used directly in the optimization stage. In the second phase, the simulation model is replaced by a valid metamodel. In addition, a new optimization algorithm is presented. To evaluate the performance of the proposed algorithm, it is applied to the (s,S) inventory problem as well as to five test functions. Numerical results show that the proposed algorithm leads to better solutions with less computational time than the corresponding metamodel-based algorithm. © 2017 Taylor & Francis Group, LLC  

The synthesis of a series of benzoxazocines has been achieved in good yields by tandem C-alkylation and intramolecular O-alkylation of 1,3-dicarbonyl compounds with quinolinium salts. This is a novel example of the synthesis of eight-membered rings via a tandem process, which provides a method for the synthesis of medium-ring heterocycles  

This study describes an odorless protocol for the synthesis of unsymmetrical sulfides via cobalt ferrite (CoFe2O4) catalyzed cross-coupling reaction of nitroarenes with alkyl halides in the presence of thiourea as sulfur source under ligand-free conditions. The catalyst was recycled using external magnetic field and reused for ten consecutive runs in the reaction of nitrobenzene, thiourea and benzyl bromide without significant loss of activity. Apart from being magnetically separable, being inexpensive and air-stable are another important features of this catalytic system. All the products were formed in good yields and short reaction times. © 2017 Elsevier B.V