Sharif Digital Repository

CuSO4/SiO2 is found to be an efficient and selective medium for the acetalization of aldehydes in the presence of ketones in solvent-free conditions under microwave irradiation. © 2005 Bentham Science Publishers Ltd  

An algorithm has been developed to investigate the effect of asphaltene precipitation on calculation of minimum miscibility pressure (MMP), which is one of the key design parameters of any gas injection projects. In fact, this algorithm is the extension of procedure suggested by Jaubert et al. for prediction of MMP whatever the displacement mechanism. The vapor-liquid equilibrium calculation and then liquid-liquid equilibrium calculation are required to be taken account to estimate the amount of asphaltene precipitation. The association equation of state (AEOS) has been applied to determine the phase behavior of asphaltene. The algorithm has been used for the MMP prediction of Weyburn... 

Indoor communication systems operating at millimeter wave frequencies are getting increasing attention due to their ability of having wider bandwidth and as a result conveying information at higher bit rates. At these systems, the capacity of channel is very important especially where there is no line of sight due to an obstacle. Here we examine the use of a multiple-input multiple-output (MIMO) system in a 2D room with an obstacle at 60 GHz. We estimate the channel by using the closed-form Green's function of the room and show the ability of MIMO to increase the available capacity of the system in the room chiefly behind the obstacle. © 2016 IEEE  

An AlCl3-ZnCl2 mixture supported on silica gel is found to be a new efficient medium for the Beckmann rearrangement in solvent-free conditions under microwave irradiation. The yields are good to excellent  

In nuclear reactor core design, achieving the optimized arrangement of fuel assemblies (FAs) is the most important step towards satisfying safety and economic requirements. In most studies, nuclear fuel optimizations have been performed by using a finite number of different types of FAs. However the effect of FA numbers with different enrichments and the difference between their maximum and minimum enrichment values can be important and should be evaluated in the optimization process. This research is aimed at evaluating the effect of using different enrichment values for FAs. This issue has been investigated by focusing on two parameters, namely, the initially selected enrichment and the... 

As elastic optical networks (EONs) are expected to convey high bitrate connections, a failure in these networks causes vast data losses. Thus, addressing the problem of survivability in EONs is of great importance. In this paper, survivability of an EON with multiclass traffic is investigated, where each traffic type needs specific protection mechanism and scheduling strategy. In particular, a connection request may demand for dedicated path protection, shared backup path protection, or restoration mechanism. Besides, it can tolerate a pre-determined delay and be scheduled at future time slots, referred to as advance reservation, or must be served immediately without any delay, referred to... 

The transmission capacity of traditional single core fibers is reaching its upper bound. Space-division multiplexing (SDM) leveraging multi-core fibers is considered to be a promising solution for this problem. Elastic optical networks (EONs) with Multi-core fibers (MCF) are a kind of SDM-enabled EONs (SDM-EON) providing larger transmission capacity. However, the resource assignment in these networks becomes more complex due to inter-core crosstalk. Another important issue to be considered in future networks is the time domain behavior of incoming traffic which means considering Advance Reservation (AR) requests, in addition to regular Immediate Reservation (IR) requests. In this paper, the... 

In this paper, the problem of routing, modulation level, core, and spectrum assignment (RMCSA) in space-division-multiplexed elastic optical networks (SDM-EONs) is studied. We formulate this problem as a mixed-integer linear programming (MILP), in which dedicated and shared path protection schemes are supported in SDM-EONs with multi-core fibers (MCFs) and the inter-core crosstalk of MCFs is strictly modeled. Furthermore, an efficient heuristic algorithm is proposed to solve the RMCSA problem in a large scale scenario. Numerical results reveal that the formulated MILP leads to lower spectrum usage compared to the alternative methods. Moreover, the proposed heuristic algorithm performs close... 

Elastic Optical Network (EON) is a promising solution to address the high capacity, low latency, and flexibility requirements of the upcoming 5th-generation (5G) networks. Furthermore, Multi-Core Fibers (MCFs) and Space Division Multiplexing (SDM) technique can be utilized to overcome the capacity limitation of the conventional Single Mode Fibers (SMFs). On the other hand, Quantum Key Distribution (QKD) is an effective solution to address the security issues in 5G transport networks. In this paper, we investigate the performance of QKD over elastic optical networks with multi-core fibers and address the resource allocation problem for quantum and classical channels of QKD (QChs and CChs) and... 

In this paper, we present new adaptive linear discriminant analysis (LDA) algorithm and apply them for adaptive facial feature extraction. Adaptive nature of the proposed algorithm is advantageous for real world applications in which one confronts with a sequence of data such as online face recognition and mobile robotics. Application of the new algorithm on feature extraction from facial image sequences is given in three steps: i) adaptive image preprocessing, ii) adaptive dimension reduction and iii) adaptive LDA feature estimation. Steps 1 and 2 are done simultaneously and outputs of stage 2 are used as a sequence of inputs for stage3. The proposed system was tested on Yale and PIE face... 

This paper is aimed at proposing a current based vector control model of the brushless doubly fed induction generator, modelling the presented control method, as well as implementing the proposed algorithm by DSP. In order to achieve the purpose, by presenting a detailed coupled circuit model of BDFIG, the vector model and then the current based vector control algorithm of the mentioned machine are acquired. The way of independent control of torque and power, and also the structure of speed controller amongst the proposed control model are discussed. Additionally, the concepts behind the proposed structure of the speed control system and the way of determining the model parameters are... 

A one-pot four-component reaction of aldehydes, ethyl acetoacetate/5,5-dimethyl-1,3-cyclohexanedione, ethyl acetoacetate and ammonium acetate in the presence of 10 mol% of ZnO as a heterogeneous catalyst for the synthesis of corresponding 1,4-dihydropyridine and polyhydroquinoline derivatives via the Hantzsch condensation is described. The present methodology offers several advantages such as simple procedure, excellent yields, and short reaction time  

A convenient one-pot multi-component reaction of aromatic aldehydes, enolizable ketones or β-keto esters and acetonitrile in the presence of acetyl chloride and 10 mol% ZnO nanoparticles for the synthesis of β-acetamido ketones/esters at room temperature is described. © 2007 Elsevier B.V. All rights reserved  

KF-Al2O3 catalyzes the reaction of arylthioacetamides with α-bromo, ketones to give fully substituted new indeno- and naphtho- fused thiophenes with good yields under solvent-free conditions by controlled microwave heating. A mechanism is proposed for the reaction course. © 2007 Bentham Science Publishers Ltd  

Organic-inorganic hybrid halide perovskite materials have been most attractive for wide range of optoelectronic applications. Investigating the photo-response in these devices will be very useful to understanding cell performance in different conditions and applications. For understanding non-linearity photo-response we use the Bathocuproine (BCP) as blocking layer in two interfaces of inverted perovskite solar cell (FTO/NiO/BCP/Perovskite/PCBM/Au and FTO/NiO/Perovskite/PCBM/BCP/Au). Employing thick BCP layer (≈15 nm) caused s-shaped JV curve due to charge accumulation at interfaces. The nonlinearity effect was also explored for devices with s-shaped JV and established that device parameters... 

A series of novel pseudopeptides contained coumarin skeleton were synthesized through the Ugi-four-component reaction. The 3-substituted coumarin-3-carboxamides were formed through reaction of benzaldehyde derivatives, anilines, coumarin-3- carboxylic acid and isocyanides with high yields and high bond-forming efficiency at room temperature. These novel amidated coumarins exhibit brilliant fluorescence in range of 535-547 nm in chloroform  

In this work, similar butt joints of AA6061-T6 alloy prepared by underwater friction stir welding (UWFSW) and friction stir vibration welding (FSVW) processes were examined. The characteristics of joints were compared with the joints obtained by conventional friction stir welding (CFSW). The different kinds of microstructural modifications that occurred during CFSW, FSVW, and UWFSW processes were analyzed. The results are employed to analyze the different behaviors in strength, ductility, weldability, and hardness of the joints in different processes at different traverse speeds, rotational speeds, and vibration frequency. It was found that mechanical vibration decreases the grain size in... 

In this work, similar butt joints of AA6061-T6 alloy prepared by underwater friction stir welding (UWFSW) and friction stir vibration welding (FSVW) processes were examined. The characteristics of joints were compared with the joints obtained by conventional friction stir welding (CFSW). The different kinds of microstructural modifications that occurred during CFSW, FSVW, and UWFSW processes were analyzed. The results are employed to analyze the different behaviors in strength, ductility, weldability, and hardness of the joints in different processes at different traverse speeds, rotational speeds, and vibration frequency. It was found that mechanical vibration decreases the grain size in... 

We introduce a new robust simulation optimization method in which the probability of occurrence of uncertain parameters is considered. It is assumed that the probability distributions are unknown but historical data are on hand and using φ-divergence functionality the uncertainty region for the uncertain probability vector is defined. We propose two approaches to formulate the robust counterpart problem for the objective function estimated by Kriging. The first method is a minimax problem and the second method is based on the chance constraint definition. To illustrate the methods and assess their performance, numerical experiments are conducted. Results show that the second method obtains... 

In this article, a new algorithm for rather expensive simulation problems is presented, which consists of two phases. In the first phase, as a model-based algorithm, the simulation output is used directly in the optimization stage. In the second phase, the simulation model is replaced by a valid metamodel. In addition, a new optimization algorithm is presented. To evaluate the performance of the proposed algorithm, it is applied to the (s,S) inventory problem as well as to five test functions. Numerical results show that the proposed algorithm leads to better solutions with less computational time than the corresponding metamodel-based algorithm. © 2017 Taylor & Francis Group, LLC