Sharif Digital Repository

In 2009, a general equation of state (EOS-III) based on an effective near-neighbor pair interaction of an extended Lennard-Jones (3, 6, 12) type has been introduced as : , where is the compressibility factor, p and ρ stand for pressure and molar density , respectively, T is Temperature , and e, f and g are the temperature dependent coefficient of the equation of state . the Z_th and Z_in are the thermal and internal contributions of pressure in the compressibility factor, respectively. this equation of state gives a good description of all types of nano- and bulk –solid and bulk fluid at entire temperature and pressure ranges for which thee is experimental data. Investigation show that... 

Epoxy resins are relatively brittle and have low resistance to crack propagation. It is common to add rubber particles to improve crack resistance in epoxies, although these particles may deteriorate the strength of the matrix. Different nanomaterials are used to overcome the inherent brittleness of epoxies and to keep the mechanical properties. Among them, carbon nanotubes has been attracted many attentions. Fractue behavior and mechanical properties of two kind of novel nanocomposites, i.e, epoxy/carbon nanotube and epoxy/rubber/carbon nanotube are investigated in current study. Electron microscopy investigations were done to assure the CNTs distribution and fracture mechanisms as well.... 

Wildfires are complex phenomena with many indeterminate and highly unpredictable driving factors that have remained unresolved. During the last decade, machine learning methods have successfully excelled in wildfire prediction as an alternative to traditional field research methods by elucidating the relationship between historical wildfire events and various important variables. The main purpose of this research is to evaluate the random forest machine learning approach and the logistic regression statistical approach to prepare a wildfire susceptibility map using data related to historical wildfires and effective variables in the Okanogan region in Washington province of the United States... 

The rise in carbon dioxide levels has led to the manifestation of numerous environmental challenges. Currently, the absorption and conversion of carbon dioxide into valuable fuel resources such as synthetic gas, methane, and ethylene are deemed crucial from both environmental and economic standpoints. Despite the presentation of photocatalysts such as titanium oxide and electrocatalysts such as copper, silver, and zinc, their efficiency in CO2 conversion is found to be insufficient. One potential solution to this problem is the utilization of photoelectrocatalytic CO2 recovery. In this study, the aim was to enhance the photoelectrocatalytic reduction of CO2 by designing and manufacturing... 

Minimizing energy consumption is the most important concern in wireless sensor networks (WSNs). Cooperative multiple-input multiple-output (MIMO) and data aggregation are two promising techniques to conserve energy in network nodes by coordinating their transmissions through cooperative communications along with eliminating the inherent redundancy of raw data for transmissions. In this thesis, with the goal of reducing energy consumption, we present a dynamic clustering framework for combined used of cooperative MIMO and data aggregation in cluster-based WSNs. We derive a new and more general energy model for computing energy consumption of cooperative data aggregation in wireless sensor... 

In this thesis, design and analyses of honeycomb structures are investigated. Primary goal is to develop an equivalent orthotropic material model that is a good substitute for the actual honeycomb core. By replacing the actual honeycomb structure with the orthotropic model, during the finite element analyses, substantial advantages can be obtained with regard to ease of modeling and model modification, solution time and hardware resources . To figure out the best equivalent model among the approximate analytical models that can be found in the literature, a comparison is made. First sandwich beams with four different honeycomb cores are modeled in detail and these are accepted as reference... 

In this thesis, we investigate two subjects in gravitational microlensing. In first part we study wave optics effect in light curve of a binary system. Gravitational lensing occurs when light deflects in a gravitational field. This deflection produces multi-images from real one. In microlensing regime, images can not be detected separately and gravitational lensing appears as magnifying source’s flux . Microlensing has been studied mostly in geometric optics regime. At larger wavelengths, mostly at radio wavelengths, we expect to see the effects of wave optics in microlensing. Stars at radio wave are faint and to detect them we need a powerful radio telescope. In the near future, SKA (Square... 

In this investigation Magneto Mercury Reciprocating Micrpump (MMRM) the combination of Magneto-Hydrodynamic and Reciprocating micropumps has been analyzed. To achieve the analytical and numerical solution of one-tank and three-tank MMRM, the momentum, continuity, volume fraction and magnetohydrodynamic equations have been presented. The dimensionless analytical solution of one-phase and two-phase three dimensional MHD flow in the condition of using constant current and potential electrical source, has been offered.
The boundary between mercury and air has been tracked via VOF method in OpenFOAM software. VOF equation has been solved by explicit method with variable time step and maximum... 

Steel in Iran is mainly produced by EAFs. One of the most fundamental issues in the field of electric arc furnace is to foresight methods to reduce energy consumption and emissions. A model is presented in the present research work that avails itself to analysis of mass and energy recovery simultaneously. The proposed model includes three major elements: scrap pre-heating, sponge iron pre-heating and inert gases pre-heating. An important feature of this approach is to preheat sponge iron. Mathematical model for preheating scrap has been developed on the basis of CONSTEEL technology. Also the model for sponge iron and inert gases preheating has been formulated based on the literature review.... 

Direct steam generation (DSG) process using linear FRESNEL collectors has been developed widely in recent years and is one of the most promising solar technologies for thermal power generation, Industrial processes and domestic usage. In this process water as heat transfer fluid (HTF) is heated through a solar field. Continuous breakthroughs are being achieved on improvement of these collectors. A multi-phase CFD model is developed to calculate the wall temperature of linear Fresnel absorber tubes and fluid properties including temperature, velocity, and pressure. In order to design the collector field and identify the critical condition such as overheating of the absorber tubes, modeling of... 

The perpuse of this thesis is to design and fabricate a laboratory one degree of freedom stable platform under turbulences by model-based design method. To do this, different parts of the system were first modeled in the Solidworks software and then fabricated with various tools. With proper assembly of electronic and mechanical components, the original body of the system was created. Then, the controller motor with a stable platform which is attached to it was modeled and simulated in MATLAB software. Then, the parameters of the equations were calculated using standard identification tests and TCACS optimization algorithm. One of the challenges of this thesis is the malfunction of the... 

Planning orders and inventory is one of the most important issues in the planning of petrochemical production. Considering the customization of this industry, orders planning includes a large part of it. Also, in order to reduce the great cost of inventory storage, planning to reduce inventory must be considered. In this regard, we intend to present a model with simultaneous consideration of orders and inventory planning in this research, the ability to decide on acceptance of orders and determine the level of production of products in conditions of uncertainty of demand with random trapezoidal demand in each period can be assumed. This model will practically play a key role in improving... 

The increasing demand for urban logistics services and the growing customer expectations regarding delivery speed and quality have made the vehicle routing problem a critical operational challenge for logistics companies. In this study, the same-day pickup and delivery vehicle routing problem was investigated using real-world data from a logistics company in Tehran. For this purpose, a mixed integer linear programming model was presented with the aim of minimizing the total travel cost, fixed vehicle operating cost, and delay costs. The problem formulation considered open vehicle routing, pickup and delivery, same-day delivery, stochastic and time-dependent travel times, and heterogeneous... 

Preformed particle gels (PPGs) due to its advatantage over commonly used in situ gels has been successfully applied for controlling excess water production in mature oil reservoirs. Field results of using PPGs in oil fields shows that commonly used PPGs are highly sensitive to hard reservoir conditions such as high temperature and salinity and can not effectively block fractures and high permeability layers.Objects of this study are synthesis and evaluating performance of this novel polymer based hydrogel in oil reservoirs with high temperature and salinity. Central composite design ( which is a experiment design approach) was used for synthesizing thirteen gel samples and optimal sample was... 

Biological layers are one of the main problems related to water transfer with pipe lines which are formed through time in the inner surface of the pipes by the water nutrients. Hence, the inner surfaces in the pipe lines and water refineries should be made in order not to let these biological layers to be made. The reason is that when the biofilm is formed on these surfaces, the traversing water is polluted. Dredging of these pipes is not only necessary in most of the countries in the world and needs huge amounts of water but is also very complex and expensive.In this research, nanomaterials, namely ZnO, T〖iO〗_2،S〖iO〗_2 have been used to cover the surface of concrete and steel pipes (The... 

Sand production from oil reservoirs leads to various problems, such as well productivity reduction, operating equipment corrosion, and increased production costs. Therefore, controlling sand production in unconsolidated reservoirs is crucial for operating companies. Chemical injection into the formation in order to strengthen and reduce sand production is one of the most important methods of sand control. In this study, a hydrogel nanocomposite was designed and its effectiveness in sand control was investigated. Various tests were carried out to define and assess its efficacy, as follows: Morphological tests demonstrated the creation of a dense, homogeneous, and porous structure. Structural...