Sharif Digital Repository

Environmental issues and lack of drinking water had forced researchers to find some alternatives in order to wastewater treatment. Since dyes are used in a variety of industrial application such as textile, pharmaceutical, etc.; therefore, wastewater of these factories makes several environmental problems. Using catalysis under UV- irradiation (photocatalysis) is one of the cases that is used in wastewater treatment which the catalyst stimulated under UV- irradiation and this process degraded dyes. In this work, reactive red 198 degradation is investigated with MIL-53(Fe) and MIL-100(Fe) and in the literature section, the methods that was implemented by other researchers is studied.... 

Increased photo catalytic activity of NiO and 〖Co〗_3 O_4 were obtained by Ni〖Co〗_2 O_4 synthesizing and supporting functionalized multiwall carbon nano-tubes via calcinations followed by hydrothermal precipitation. NiO, 〖Co〗_3 O_4 and Ni〖Co〗_2 O_4 were prepared in the same procedure exactly for the subsequent photo catalytic activity to be compared to Ni〖Co〗_2 O_4/MWCNT later on. The photo catalytic degradation of Reactive Red 120 dye as a deazo organic pollutant model was used for experimental photo catalytic performance analysis. The CCD method was applied for experimental designing, modeling, and optimizing the operational parameters of the photo catalytic degradation of RR120 using... 

In literature, substantial works have been done on supply chain coordination. The majority of these works looking for a mechanism that enforces the supply chain members to follow strategies that produce the equilibria of an integrated supply chain, and most of this literature ignores competition between supply chains. In this thesis, we consider two distinct supply chains which compete to each other on the price. We present a method to calculate the equilibria for three structural forms. In the first form, two supply chains are integrated and in the second form, one of the supply chains is integrated and the other one is decentralized. Finally in the third form, both supply chains are... 

Necessity of a public transport network, environmental protection and a highly land cost in urban areas have increased the desire for underground transportation systems. On the other hand, ventilation system design should be done precisely specially for longer tunnels, large undergrounds spaces and crowded places. Rate of energy reduction for vent systems operation is dependent on their proper implementation. Tunnel design efficiently is influenced by ventilation system. The tunnel mid shaft is complementary part of the underground railway systems that is required for exchange air between the tunnel and the railway station with ambient fresh air. An important application of the tunnel mid... 

Immediate control of pandemic influenza to avoid casualties and financial losses is an important issue. In this thesis, two types of controllers including optimal controller and adaptive generalized predictive controller based on linear input-output model, with vaccine, treatment and quarantine being controlling variables, have been used to control influenza. Each controlling methods were investigated for different states including single-input single-output and multi-input single-output. Single-input single-output and multi-input single-output models are identified as online and offline using least squares method. Since it is difficult to exactly identify the model parameters, especially at... 

Over the past few decades, brachytherapy has been used as one of the leading methods in the treatment of a wide range of cancers, including breast cancer. Due to the high dose gradient of brachytherapy radiation sources, this method is used to treat such tumors that are grown at the vicinity of sensitive points or tissues of the body. Therefore, as irradiation get started by implanting radiation sources in the desired position, at the same time healthy tissue are also receiving the same dose as tumor tissues do Reducing healthy tissue dose along with increasing the dose of tumor tissue is one of the challenging topics that researchers are always looking for a solution. In the left breast... 

Benzimidazoles are a bioactive family of chemicals which had been subject of many studies because of their valuable properties, and has a long history of production in chemical industries. Investigation on their properties and reactions with goal of achieving to new derivatives have drawn attention of many research teams. Recently, 2- Imidazolineaminobenzimidazole had been synthesized by microwave-assisted reaction of 2-Aminobenzimidazole with 2-Methylsulfanylimidazoline hydrogen iodide. But because of difficulties aroused by use of microwave system and expensive chemicals, we decided to utilized reaction procedures which could be facile, inexpensive with capability of high reaction scales.... 

In the proton exchange membrane fuel cells (PEM, the produced water would be divided into two phases of vapor and liquid. distribution of both liquid and vapor phases in different cell layers affects the performance, the efficiency and the life of a fuel cell significantly. Moreover, Nano pores of the cathode catalyst layer are involved with some phenomena such as electrochemical reaction kinetics, heat and mass transfer and interface phase change. One of the most important problems in the performance of fuel cells is distribution of liquid water in the porous areas. Water flooding in fuel cells causes to delay in oxygen transport to active sites in the catalyst layer because the pores of... 

The propagation behavior of Love wave in functionally graded magneto-electro-elastic half-spaces with a quadratic variation is addressed. The magneto-electromechanical coupling factor, the dispersion relations, electric potential, magnetic potential and displacement are obtained analytically for both magneto-electrically open and short conditions. The effect of gradient coefficient on phase velocity, group velocity and magneto-electromechanical coupling factor are plotted and discussed. Research on the wave propagation in magneto-electro-elastic materials is still very limited. This work provides us with a theoretical foundation to design and practically apply SAW devices with high... 

In this study, the interaction between thin plate completely bonded to the transversely isotropic halfspace and a concentrated force applied horizontally (Mindlin-type force) are considered. This problem has been solved analytically. This problem is used as sample for thin solid films and surface coating technology, where the surface of solid is covered by thethin plate for increasing its stiffness. Moreover, this problem is a good sample when homogenous solid is subjected to contact loading and can be seen that mechanical properties of material which is near the solid surface varies; consequently, a two-phase solid is created.Because of the influence of noted inhomogeneity, solid is... 

Hydrodynamics plays a crucial role in defining the performance of fluidized beds. The numerical simulation of fluidized bed is very important in the prediction of its behaviour. From this point of view, in the present study a dynamic two dimensioanl model is developed for the modeling of regenerator system of a UOP fluid catalytic cracking (FCC) unit of Abadan refinery with a high-efficiency regenerator. Of the various modeling and simulation techniques, computational fluid dynamics (CFD) is employed in this thesis. Effects of gas velocity, the transient local solid volume fraction, pressure drop for gas and solid phase, solid holdup distribution and solid circulation pattern have been... 

Privacy preserving data mining helps organizations and companies not only to deal with privacy concerns of customers and regular limitations, but also to benefit from collaborative data mining. Utilizing cryptographic techniques and secure multiparty computation (SMC) are among widely employed approaches for preserving privacy in distributed data mining. The general purpose of secure multiparty computation protocols to compute specific functions on private inputs of parties in a collaborative manner and without revealing their private inputs. Providing rigorous security proof of secure multiparty computation makes it a good choice for privacy preservation, despite of its cryptographic... 

The rapid growth of Android operating system alongside its open-source nature has made it as the most popular operating system of mobile devices. On the other hand, regarding the increasing computational power of mobile devices, a wide variety of applications are coming to this type of devices. Meanwhile unfortunately many malicious softwares trying to keep up with other applications, are targeting this popular operating system. Therefore with regard to the fact that this type of devices usually store private and sensitive information of their users, security of mobile operating systems is considered very important. Having this matter in mind, the goal of this research work has been... 

In this study, a new concrete slab stiffened by concrete pedestals and steel cables is introduced. The slab system is studied by employing both analytical and numerical methods. The steel cables are connected to the edges of slab and the concrete pedestals mounted at the bottom face of slab act as the middle supports of cables. The tension force in the cable and its inclination results in upward forces acting at the bottom face of slab. With the aims of classical theory of thin plates and the superposition technique, the problem of a simply supported rectangular slab stiffened by cables is studied analytically. The obtained results are verified by a numerical modelling implemented in SAP2000... 

The parametric study of a new introduced metallic yielding damper called telescopic damper is addressed. The telescopic damper comprises of three concentric steel pipes connected together by lead shear keys. The inner and outer steel pipes are subjected to axial loading which results in the shear yielding of the embedded lead cylinders. The inner steel pipe has a lock which limits its movement to some certain extent and beyond this limit the outer tube activates. Employing ABAQUS software, the behavior of damper under cyclic loading is studied numerically. The finite element model is verified by available results in the literature. The effects of inner and outer steel pipes thickness,...