Loading...
Search for:
mahboubi-kancha--m
0.145 seconds
Total 21474 records
Preparation and characterization of PVA/chitosan nanofibers loaded with Dragon's blood or poly helixan as wound dressings
, Article International Journal of Biological Macromolecules ; Volume 272 , 2024 ; 01418130 (ISSN) ; Mehrabi, M ; Aghaie, F ; Bitaraf, F. S ; Dehghani, F ; Bernkop Schnürch, A ; Sharif University of Technology
2024
Abstract
Nanofibers have been investigated in regenerative medicine. Dragon's blood (DB)- and poly helixan PF (PHPF) are natural materials used in cosmetics. Herein, we generated DB- and PHPF-loaded polyvinyl alcohol/chitosan (PVA/CS/DB and PVA/CS/PHPF, respectively) nanofibers. PVA/CS/DB and PVA/CS/PHPF nanofibers had an average diameter of 547.5 ± 17.13 and 521 ± 24.67 nm, respectively as assessed by SEM, and a degradation rate of 43.1 and 47.6 % after 14 days, respectively. PVA/CS/DB and PVA/CS/PHPF nanofibers had a hemolysis rate of 0.10 and 0.39 %, respectively, and a water vapor transmission rate of ∼2200 g.m−2.day−1. These nanofibers exhibited favorable antimicrobial activity against...
Optimal behavior of hot water heating coils at steady conditions
, Article 2008 ASME International Mechanical Engineering Congress and Exposition, IMECE 2008, Boston, MA, 31 October 2008 through 6 November 2008 ; Volume 10, Issue PART B , 2009 , Pages 1427-1432 ; 9780791848715 (ISBN) ; Saldi, M. H ; Sharif University of Technology
2009
Abstract
Hot water heating coils are key components in air conditioning systems undergo heat transfer. The most widely used exchangers (coils) take the form of fin and tube configuration in association with the application of air conditioning systems. In this research, thermodynamic modeling and mathematical optimization of hot water heating coils at steady conditions, approaching minimum energy consumption are achieved. The modeling procedure for heating coils is done based on the log mean temperature difference (LMTD) method. The objective function for optimization is pressure drop of air crossing coil per heating load of the system. This unction comprises all thermal and geometrical parameters of...
Developing an electro-thermal model to determine heat generation and thermal properties in a lithium-ion battery
, Article Journal of Thermal Analysis and Calorimetry ; Volume 147, Issue 21 , 2022 , Pages 12253-12267 ; 13886150 (ISSN) ; Jafari Gavzan, I ; Saidi, M. H ; Ahmadi, N ; Sharif University of Technology
Springer Science and Business Media B.V
2022
Abstract
Lithium-ion batteries should continuously be operated at the optimum temperature range (15∼40∘C) for the best performance. Surface temperature monitoring is critical for the safe and efficient operation of the battery. In this study, initially, the electrical parameters of the battery are determined by applying a second-order equivalent circuit model. This model then is integrated with a thermal model based on the temperature dependent behavior of the electrical parameters and the heat generated. The input parameters to the electro-thermal model include the current, the ambient fluid temperature and the output parameters include the terminal voltage, state of charge, cell core temperature...
State of charge estimation for lithium-ion batteries based on square root sigma point Kalman filter considering temperature variations
, Article IET Electrical Systems in Transportation ; Volume 12, Issue 3 , 2022 , Pages 165-180 ; 20429738 (ISSN) ; Jafari Gavzan, I ; Saidi, M. H ; Ahmadi, N ; Sharif University of Technology
John Wiley and Sons Inc
2022
Abstract
The battery management system (BMS) in electric vehicles monitors the state of charge (SOC) and state of health (SOH) of lithium-ion battery by controlling transient parameters such as voltage, current, and temperature prevents the battery from operating outside the optimal operating range. The main feature of the battery management system is the correct estimation of the SOC in the broad range of vehicle navigation. In this paper, to estimate real-time of SOC in lithium-ion batteries and overcome faults of Extended Kalman Filter (EKF), the Square-Root Sigma Point Kalman Filter is applied on the basis of numerical approximations rather than analytical methods of EKF. For this purpose, the...
Multi-objective Optimization of a Megawatt Wind Turbine Blade Geometry Using an Evolutionary Algorithm
, M.Sc. Thesis Sharif University of Technology ; Darbandi, Masoud (Supervisor)
Abstract
Without optimization, it is impossible to reduce the cost of power generation from an efficient megawatt wind turbine. In this work, we present a multi-objective algorithm to optimize the megawatt blade geometry. In this algorithm, the mass of blade and the wind turbine annual energy production (AEP) are considered as the objective functions. The design variables are blade chord, blade twist, airfoil thickness, spar geometry and blade curvature distribution.The constraints are maximum allowable strain for the chosen materials, maximum tip deflection and maximum tip speed. For the internal geometry, we consider two spars and four panels. The blade element momentum method (BEM) is used for...
Synthesis and Characterization of Grapheme Foams Fabricated by Chemical Vaporization Deposition
, M.Sc. Thesis Sharif University of Technology ; Akhavan, Omid (Supervisor) ; Azimirad, Rouhollah (Co-Advisor)
Abstract
The main purpose of this theses is to synthesize graphene by chemical vapor deposition (CVD) of a hydrocarbon gas such as methane on the nickel foam substrate and then to characterize this kind of graphene. Graphene is a single layer of carbon atoms, discovered in 2004, which has led mankind to new eras in all fields by its extraordinary features such as extra high electron mobility, high thermal conductivity, excellent mechanical strength, optical transparence and extra high specific surface. The advantage of this method compared to other methods is that the graphene generated has a better structural quality. Graphene foam firstly, because of the continuity of the foam structure, has better...
Intralesional immunotherapy compared to cryotherapy in the treatment of warts
, Article International Journal of Dermatology ; Volume 56, Issue 4 , 2017 , Pages 474-478 ; 00119059 (ISSN) ; Jabbari Azad, F ; Mahboubi Oskouei, Y ; Jafari, M ; Tehranian, S ; Alizadehsani, R ; Layegh, P ; Sharif University of Technology
Blackwell Publishing Ltd
2017
Abstract
Background: Warts are the most common clinical manifestation of the human papilloma-virus infection in the skin and mucous membranes. In spite of the various therapeutic modalities for nongenital skin warts, there is still no single method to be used as an approved treatment. In this study, we compared the efficacy of immunotherapy and cryotherapy on wart lesions. Methods: Sixty patients with verruca vulgaris and plantar warts were randomly divided into two groups. One group received intralesional injection of candida antigen repeated every 3 weeks until complete improvement of all warts or for a maximum of three sessions. The second group was treated by cryotherapy with liquid nitrogen for...
Probability of missed detection as a criterion for receiver placement in MIMO PCL
, Article IEEE National Radar Conference - Proceedings, 7 May 2012 through 11 May 2012, Atlanta, GA ; 2012 , Pages 0924-0927 ; 10975659 (ISSN) ; 9781467306584 (ISBN) ; Chitgarha, M. M ; Radmard, M ; Nayebi, M. M ; Sharif University of Technology
IEEE
2012
Abstract
Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar
An efficient method for the ring opening of epoxides with aromatic amines by Sb(III) chloride under microwave irradiation
, Article Journal of Chemical Research ; Issue 4 , 2008 , Pages 220-221 ; 03082342 (ISSN) ; Hashemi, M. M ; Mottaghi, M. M ; Foroughi, M. M ; Sharif University of Technology
2008
Abstract
SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity
Resource allocation for uav-enabled integrated sensing and communication (isac) via multi-objective optimization
, Article ICASSP, IEEE International Conference on Acoustics, Speech and Signal Processing - Proceedings ; Volume 2023-June , 2023 ; 15206149 (ISSN); 978-172816327-7 (ISBN) ; Naghsh, M. M ; Karbasi, M ; Nayebi, M. M ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2023
Abstract
In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit...
MIMO radar signal design to improve the MIMO ambiguity function via maximizing its peak
, Article Signal Processing ; Volume 118 , 2016 , Pages 139-152 ; 01651684 (ISSN) ; Radmard, M ; Nazari Majd, M ; Karbasi, S. M ; Nayebi, M. M ; Sharif University of Technology
Elsevier
2016
Abstract
One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function...
Detection-localization tradeoff in MIMO radars
, Article Radioengineering ; Volume 26, Issue 2 , 2017 , Pages 581-587 ; 12102512 (ISSN) ; Radmard, M ; Chitgarha, M. M ; Bastani, M. H ; Nayebi, M. M ; Sharif University of Technology
2017
Abstract
Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance...
Antenna placement and power allocation optimization in MIMO detection
, Article IEEE Transactions on Aerospace and Electronic Systems ; Vol. 50, Issue 2 , April , 2014 , pp. 1468-1478 ; Chitgarha, M. M ; Majd, M. N ; Nayebi, M. M ; Sharif University of Technology
2014
Abstract
It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive...
Ambiguity function of MIMO radar with widely separated antennas
, Article Proceedings International Radar Symposium ; 16 -18 June , 2014 ; ISSN: 21555753 ; Chitgarha, M. M ; Nazari Majd, M ; Nayebi, M. M ; Sharif University of Technology
2014
Abstract
There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas
Choosing the position of the receiver in a MISO passive radar system
, Article European Microwave Week 2012: "Space for Microwaves", EuMW 2012, Conference Proceedings - 9th European Radar Conference, EuRAD 2012 ; 2012 , Pages 318-321 ; 9782874870293 (ISBN) ; Majd, M. N ; Radmard, M ; Nayebi, M. M ; Sharif University of Technology
2012
Abstract
By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only...
Adaptive filtering techniques in passive radar
, Article Proceedings International Radar Symposium, Dresden ; Volume 2 , June , 2013 , Pages 1067-1078 ; 21555753 (ISSN) ; 9783954042234 (ISBN) ; Radmard, M ; Majd, M. N ; Nayebi, M. M ; Sharif University of Technology
2013
Abstract
One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared
Ambiguity function based receiver placement in multi-site radar
, Article 2016 CIE International Conference on Radar, RADAR 2016, 10 October 2016 through 13 October 2016 ; 2017 ; 9781509048281 (ISBN) ; Chitgarha, M. M ; Nazari Majd, M ; Nayebi, M. M ; Sharif University of Technology
2017
Abstract
It has been shown that using multiple antennas in a radar system improves the performance considerably, since multiple target echoes are received from different aspect angles of the target. In this way, the target detection is improved. However, when using multiple antennas, some problems, such as designing the transmit signals, synchronization, etc. emerge that should be solved. One of such problems is the receiver placement. Receiver placement deals with choosing a proper position for the receive antenna in order to optimize the whole system's performance. In this paper, a receiver placement procedure based on improving the radar ambiguity function is proposed for the case of a multisite...
Improving MIMO radar's performance through receivers' positioning
, Article IET Signal Processing ; Volume 11, Issue 5 , 2017 , Pages 622-630 ; 17519675 (ISSN) ; Radmard, M ; Nazari Majd, M ; Nayebi, M. M ; Sharif University of Technology
Institution of Engineering and Technology
2017
Abstract
By employing the MIMO (multiple-input-multiple-output) technology in radar, some new problems emerged, that, in order to benefit the MIMO gains in radar, it was necessary to solve them suitably. One of such obstacles is determining the positions of receive antennas in a MIMO radar system with widely separated antennas (WS MIMO radar), since it is shown that the antennas' positions affect the whole system's performance considerably. In this study, a proper receivers' positioning procedure is proposed. To do this end, four criteria are developed based on the proposed MIMO detector and the MIMO ambiguity function. The simulations verify that the proposed positioning procedure improves the...
Silylation of hydroxy groups with HMDS under microwave irradiation and solvent-free conditions
, Article Phosphorus, Sulfur and Silicon and Related Elements ; Volume 177, Issue 2 , 2002 , Pages 289-292 ; 10426507 (ISSN) ; Saidi, M. R ; Bolourtchian, M ; Heravi, M. M ; Sharif University of Technology
2002
Abstract
Phenols and alcohols are silylated with hexamethyldisilazane (HMDS) under microwave irradiation in solvent-free condition in good to excellent yields
An intelligent solvent selection approach in carbon capturing process: a comparative study of machine learning multi-class classification models
, Article Results in Engineering ; Volume 23 , 2024 ; 25901230 (ISSN) ; Hosseinpour, M ; Salimi, M ; Boroushaki, M ; Amidpour, M ; Sharif University of Technology
2024
Abstract
Carbon capture is crucial for mitigating climate change and achieving global emissions reduction targets. Among various technologies, absorption-based methods using aqueous solvents are among the most common and efficient, offering high capture rates and retrofit capabilities for existing industrial facilities. However, selecting the optimal solvent is challenging due to its direct impact on the performance, efficiency, and cost-effectiveness of the carbon capture process. This research introduces a novel multi-class classification methodology for solvent selection in carbon capture. Leveraging a dataset of 656 data points, including features such as temperature, pressure, molar ratio, and...