Sharif Digital Repository

Thermal elongation of energy piles (EPs) depends on the end restraints to displacement. The EP head is restrained by a working load and non-energy piles (NEPs) within an energy pile group, depending on the cap rigidity. The existence of both EPs and NEPs in non-symmetrical thermally loaded energy pile groups imposes different restraints on EP heads, resulting in different pile elongations. This would induce load redistribution between the piles, thereby influencing the serviceability of energy pile groups in soft soil. In this paper, a 3-D numerical parametric study was conducted after back-analysing a centrifuge test on a floating elevated energy pile group subjected to cyclic... 

Dental resin composites are widely used as restorative materials due to their natural aesthetic and versatile properties. However, there has been limited research on the degradation mechanisms of these composites in gastric acid environments, which would be common in patients with gastroesophageal reflux. This study aims to investigate the degradation behavior of dental composites immersed in simulated oral environments, including acid, saliva, and water. Mechanical and morphological properties of the composites, upon immersion in the simulated environments, were thoroughly examined using hardness testing and SEM imaging. Qualitative analyses of the ions leached from the polymer matrix and... 

The complexity of the optimal phase control problem in wireless MIMO systems with scalar feedback quantization and equal-gain transmission is studied. The problem is shown to be NP-hard when the number of receive antennas grows linearly with the number of transmit antennas. For the case where the number of receive antennas is constant, the problem can be solved in polynomial time. An optimal algorithm is explicitly constructed. For practical purposes, a low-complexity algorithm based on local search is presented. Simulation results show that its performance is nearly optimal  

Shallow landslides can be mitigated through the hydro-mechanical reinforcement provided by vegetation. Several critical parameters, such as plant spacing and plant age, play a significant role in influencing bioengineered slope stability facilitated by vegetation. However, the coupling of these effects on the stability of vegetated slope has been ignored. The objective of this study is to investigate the hydro-mechanical impact of vegetation growth and spacing on the stability of bioengineered slopes based on the predictions of a calibrated numerical model against field measurements. The impact of vegetation is investigated, with specific attention given to different plant spacing and growth... 

Mulitphysics processes have been commonly identified in geotechnical engineering practice. Researchers and field engineers often carry out multiphysics simulations to understand complex engineering responses. In field practice, a back analysis is typically required along with the simulations to calibrate the most representative model parameters. This would intensify the problem as it requires further simulations to assess the parameter sensitivity. Therefore, an efficient back analysis for multiphysics processes still remains a challenge in practice due to the numerical complexity and the low computational efficiency. With recent advances in AI techniques, opportunities have opened up for... 

γ-Alumina is used to catalyze the Cannizzaro reaction in the absence of any base under microwave irradiation in high yields. In the case of terephthalaldehyde the reaction is carried out with high selectivity  

Natural gas hydrate, a crystalline solid existing under high-pressure and low-temperature conditions, has been regarded as a potential alternative energy resource. It is globally widespread and occurs mainly inside the pores of deepwater sediments and sediments under permafrost area. Hydrate production via well depressurization is deemed well-suited to existing technology, in which the pore pressure is lowered, the natural gas hydrate is dissociated into water and gas, and the water and gas are produced from well. This method triggers multiphysics processes such as fluid flow, heat transfer, energy adsorption, chemical reaction and sediment deformation, all of which are dependent on the... 

Pole Side Impact Tes is one out of three crash tests described by Euro NCAP standard for star rating of a vehicle and is required for assessing the Adult Occupant Protection. In this paper the goal is to determine the crashworthiness of side doors and B pillar in a Pole Side Impact Test based on Euro New Car Assessment Program (Euro-NCAP) using computer and simulation method. In this matter, a vehicle model has been prepared and meshed using Hypermesh and CATIA. The velocity of 29 km/h has been assigned to the vehicle which was on top of a cart while the pole has been assigned as a rigid static object based on Euro NCAP requirements specifically. Results show that different amounts of energy... 

To assess a car under the Euro New Car Assessment Program (Euro-NCAP), Adult Occupant Protection is one out of three parameters which need to be calculated with a weight factor of 50% while the other parameters, Child Occupant Protection and Pedestrian Occupant Protection, have a weight factor of 20%. The Pole Side Impact Test, beside two other tests, Side and Front Impact, is also required to calculate the Adult Occupant Protection. It shows how important the Pole Side Impact Test is and what an effective role it has in the car rating assessment. In this paper, the objective is to evaluate the effect of thickness on the energy absorbed by the side doors and the B pillar and its... 

In Euro NCAP standard, adult protection is one of the most important rating scores with 50% weight factor while child protection and pedestrian protection are accounted into consideration with 20% weight factor. For adult protection testing, three tests are required to perform: (1) side impact, (2) pole impact, (3) front impact. In the side impact test, dummy's head, chest, shoulder, thorax, ribs, abdomen, pelvic and femur must be studied to evaluate the rating score. Crashworthiness of a car during side impact can describe the score rated for that car. In this paper the goal is to determine the crashworthiness of side doors and B-pillar in side impact crash est by simulation using LS DYNA... 

In side impact test which is one out of three tests of Euro NCAP standard, front and rear doors and B pillar are most absorbance parts among vehicle body parts. Passengers are highly in danger while side crash, because of the distance between passenger's head and vehicle body. In this paper effect of material and thickness of doors and B-pillar and their absorbed energy during crash and improvement of its crashworthiness with respect to light weight design are studied using LS DYNA solver. The objective of this paper is to propose a material for doors and B-pillar with a specified thickness to achieve maximum absorbed energy and minimum weight. The shape of the doors and B-pillar remains... 

In this paper the objective is to study the effect of the material and thickness of the side doors and B pillar on crashworthiness and the energy absorbed in order to select a proper material and an optimized thickness to approach a five star car concept based on the Euro New Car Assessment Program (Euro-NCAP) testing Pole Side Impact. In this matter, four materials and five thicknesses have been chosen for the vehicle model and a total of twenty simulations have been conducted. The results showed that the best selected materials and thicknesses were high strength Steel 204M with a thickness of 1.2mm for side doors and 0.65mm for the B pillar, however, it is important to note that this... 

A beam-column fiber element for the large displacement, nonlinear inelastic analysis of Concrete-Filled Steel Tubes (CFT) is implemented. The method of description is Total Lagrangian formulation. An 8 degree of freedom (DOF) element with three nodes, which has 3 DOF per end node and 2 DOF on the middle node, has been chosen. The quadratic Lagrangian shape functions for axial deformation and the quartic Hermitian shape function for the transverse deformation are used. It is assumed that the perfect bond is maintained between steel shell and concrete core. The constitutive models employed for concrete and steel are based on the results of a recent study and include the confinement and biaxial... 

Pore facies analysis plays an important role in the classification of reservoir rocks and reservoir simulation studies. The current study proposes a two-step approach for pore facies characterization in the carbonate reservoirs with an example from the Kangan and Dalan formations in the South Pars gas field. In the first step, pore facieswere determined based on Mercury Injection Capillary Pressure (MICP) data in corporation with the Hierarchical Clustering Analysis (HCA) method. Each pore facies represents a specific type of pore geometry indicating the interaction between the primary rock fabric and its diagenetic overprints. In the next step, polynomial meta-models were established based... 

In recent years, IWR (Isolated Word Recognition) was one of the main concerns of speech processing. The challenging problems in this field appear when the database become so large or when we have a lot of word with similarly pronounce in the database. This paper introduces a general solution for a traditional problem in isolated similarly pronounced word recognition, especially in large databases. One the important problem of traditional IWR is referred to their segmentation algorithm, their methods were lacking in efficiency due to the following reasons: First, using equal segmentation is not at all intelligent at all and as a result, cannot produce accurate results; besides, utilizing... 

STUDY DESIGN.: Cross-sectional validation study to investigate psychometric properties of adapted Persian version of the Scoliosis Research Society-22r (SRS-22r) questionnaire. OBJECTIVES.: To translate the SRS-22r into Persian and to evaluate the internal consistency, reliability, and validity of the Persian SRS-22r. SUMMARY OF BACKGROUND DATA.: The SRS-22r has not been translated and validated for Persian-speaking patients with idiopathic scoliosis. This was to provide a validated instrument to measure health-related quality of life in patients with idiopathic scoliosis in Iran. METHODS.: The translation and cultural adaptation of the original questionnaire were carried out in accordance... 

In this research, the developing turbulent swirling flow in the entrance region of a pipe is investigated analytically by using the boundary layer integral method. The governing equations are integrated through the boundary layer and obtained differential equations are solved with forth-order Adams predictor-corrector method. The general tangential velocity is applied at the inlet region to consider both free and forced vortex velocity profiles. The comparison between present model and available experimental data demonstrates the capability of the model in predicting boundary layer parameters (e.g. boundary layer growth, shear rate and swirl intensity decay rate). Analytical results showed... 

One of the most important problems in teleoperation systems is time delay and packet loss in the communication channel, which can affect transparency and stability. One way to overcome the time delay effects in a teleoperation system is to predict the master-side motion. In this way, when data is received in the slave side, it will be considered as the current position of the master robot and, thus, complete transparency could be achieved. The majority of the previous works regarding operator position prediction have considered known and constant time delay in the system; however, in the real applications, time delay is unknown and variable. In this paper, an adaptive online prediction... 

One of the most important problems in teleoperation systems is time delay and packet loss in the communication channel, which can affect transparency and stability. One way to overcome the time delay effects in a teleoperation system is to predict the master-side motion. In this way, when data is received in the slave side, it will be considered as the current position of the master robot and, thus, complete transparency could be achieved. The majority of the previous works regarding operator position prediction have considered known and constant time delay in the system; however, in the real applications, time delay is unknown and variable. In this paper, an adaptive online prediction...