Sharif Digital Repository

Corrosion inhibition properties of some heterocyclic compounds (3-mercapto 1,2,4 triazole, benzotriazole, thiophene, and tetra hydro-thiophene) in Cu/H3PO4 medium were investigated theoretically and experimentally via cluster/polarized continuum and gravimetric approaches. Second-order Møller-Plesset perturbation and density functional theories were applied, and the electronic chemical potential, molecular softness, and extent of charge transfer were determined for inhibitor molecules at the metal/solution interface. Good correlations were observed for both theories between the calculated quantities and experimental data. To reveal the quality of metal-inhibitor interactions, comprehensive... 

Heart is a complex system and we can find its function in electrocardiogram (ECG) signal. The records show high mortality rate of heart diseases. So it is essential to detect and recognize ECG arrhythmias. The problem with ECG analysis is the vast variations among morphologies of ECG signals. Premature Ventricular Contractions (PVC) is a common type of arrhythmia which may lead to critical situations and contains risk. This study, proposes a novel approach for detecting PVC and visualizing data with respect to ECG morphologies by using manifold learning. To this end, the Laplacian Eigenmaps - One of the reduction method and it is in the nonlinear category - is used to extract important... 

Corrosion behaviour of copper metal in acid solutions (HCl, H 2SO4 and H3PO4) containing 2-amino-5-mercapto-1,3,4-thiadiazole (AMT) was investigated experimentally and theoretically via gravimetric, potentio-dynamic and quantum electrochemical approaches. Similar behavior was observed for H2SO4 and H3PO4 media, and related to the nature of anions at metal/solution interface. With regard to HCl, however, the rate of corrosion was determined to be low at initial stages, but high later on using an auto-catalyzing mechanism. In the presence of AMT, the experimental studies revealed that this molecule was a good anodic-type inhibitor causing substantial changes in corrosion potential. Moreover,... 

The inhibitory action of N,N′-1,3-propylen-bis(3- methoxysalicylidenimine) {PMSI} on mild steel corrosion in sulfuric acid medium was investigated through electrochemical methods and evaluations based on infrared spectroscopy and scanning electron micrographs. The studies revealed that the molecule is a good mixed-type inhibitor (mostly anodic), acts as a multi-dentate ligand and repels the corrosive agents by hydrophobic forces. Its adsorption on metal surface has a physicochemical nature and obeys the Langmuir isotherm. At a critical (optimum) concentration, an anomalous inhibitory behavior was observed and interpreted at microscopic level by means of desorption/adsorption process and... 

The molecular behavior of some aniline derivatives as corrosion inhibitors of iron and copper in acidic media (HCl and H2 S O4) were investigated quantum-electrochemically by some recently developed models based on density functional theory and cluster/polarized continuum approaches. In this regard, electrical dipole moment, charges on hetero atoms and acidic hydrogen, electronic chemical potential, and extent of charge transfer were determined for both neutral and protonated forms of molecules inside an electrical double layer and correlated to their inhibitory powers. Good correlations were observed for both acidic media. The results were discussed via ion-pair hypothesis and deprotonation... 

Ab initio quantum chemical calculations at the density functional theory (DFT) level were performed on eight pyridine derivative molecules as corrosion inhibitors for iron in an acidic solution. In this regard, the geometry of the molecules were optimized using the B3LYP/6-31G method first, and then interactions of these optimized structures with the iron atom were explored using the B3LYP/LANL1MB method. Two modes of adsorption were considered, i.e., planar adsorption (P) via the pyridine ring and vertical adsorption (V) through a nitrogen atom. The interaction energy was minimized through the variation of the inhibitor molecule-iron atom distance. These minimum energy values, along with... 

The molecular behavior of some benzimidazole (C7H 6N2) derivatives as corrosion inhibitors ojiron in hydrochloric acid (HCl) solution was investigated quantum electrochemically via the inhibitors' chemical potential (μ), molecular softness (σ), and the extent of charge transfer from the inhibitor to the metal (ΔN). These quantities were obtained from density functional theory (DFT) calculations for three models, i.e., isolated inhibitors (in vacua), inhibitors in solution, and, finally, inhibitors in electrical double layer (EDL). In these models, the effects of solvent, substrate, and electric field were considered using a polarized continuum model, iron Fe13(9,4) cluster, and a... 

Background: Local field potential (LFP) recordings have become an important tool to study the activity of populations of neurons. The functional activity of LFPs is usually compared with the activity of neighboring single spike neurons with sampling rates much higher than those of the continuous field potential channel (5 kHz). However, comparison of these signals generated with the lower sampling rate technique is important. New method: In this study, we provide an analysis of extracellular field potential time series using the sophisticated nonlinear multifractal detrended fluctuation analysis (MF-DFA). Using the MF-DFA, we demonstrate that the integral of the singularity spectrum is a... 

Objectives: This systematic review aims to strengthen the relationship between architecture and neuroscience by classifying data measurement techniques in the field of neuroarchitecture with a focus on the most practical and common methodological approaches. It classifies data recording techniques in different architectural categories (e.g., interior, urban, built environment). Backgrounds: With regard to urban life developments and technological breakthroughs, studies of human interactions with environments have been expanding in recent years. Additionally, recent advances in neuroscience have allowed architects to find out more about human experiences in built environments, but there are... 

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit... 

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only...