Sharif Digital Repository

In this paper, we present an envelope function analysis technique for the design of the emission spectra of a white quantum-well light-emitting diode (QWLED). The nano- metric heterostructure that we are dealing with is a multiple QW, consisting of periods of three single QWs with various well thicknesses. With the aid of 6 × 6 Luttinger Hamiltonian, we employ the combination of two methods, k · p perturbation and the transfer matrix method, to acquire the electron and hole wave functions numerically. The envelope function approximation was considered to obtain these wave functions for a special basis set. While adjacent valence sub-bands have been determined approximately, the conduction... 

In this paper we introduce a coupled system of two quantum bits residing at the interface of a heterostructure device. The structure encompasses a reference quantum bit, a photonic/plasmonic crystal waveguide and an obedient quantum bit. Each quantum bit is an electronic device which is designed based on an anti-dot lattice of two-dimensional electron gas in heterostructures. By applying a potential gate in the aforementioned structure it is possible to control electronic tunneling rate and hence quantum bits' swapping frequency. Coupling through the plasmonic waveguide may be employed to entangle quantum bits. The waveguide has been designed by exploiting conducting islands of... 

A novel plane-wave-based approach for analytical treatment of dispersive relation is developed and applied to analyze the behavior of electromagnetic waves in plasmonic-photonic-crystal slabs. Here Drude model is used for describing frequency dependent permittivity of plasma rods in host dielectric medium. In the present work, dispersion relation below and above the light line is calculated approximately by means of Maxwell-Garnett effective medium and Revised Plane Wave Method (RPWM). The eigen-functions are then used in Revised Guided Mode Expansion (RGME) as the set of orthonormal bases. Following this procedure, the accurate band structure is obtained. In these kind of methods there are... 

In this work, a GaN-based quantum well LED is theoretically analyzed in a multi-layer structure composed of a quantum well embedded in a waveguide core surrounded by photonic crystal slab and a sapphire substrate. The electromagnetic eigenmodes are obtained throughout above structure via revised plane wave-scattering matrix method. The omnidirectional transmission and reflection are investigated for both TE and TM polarizations from diffraction channels in Ewald construction. Then, we introduced angular power density and calculated radiative modes extraction efficiency. All structural parameters, such as lattice geometry, lattice constant, photonic crystal thickness and filling factor, are... 

A method for calculation of band structure has been proposed based on the Green's function theory and local sampling. Potential energy in the Hamiltonian of Schrödinger's equation is approximated with a series of sampled Dirac delta functions weighted by appropriate factors. These factors are found from multipole expansion of atomic potentials in the crystal lattice, with considering effects such as screening. Fourier transform was then applied to describe the wave function in reciprocal space. Sampling can be uniform or nonuniform throughout space; however rate and interval optimization are essential. Theory was implemented for silicon, germanium, and graphene sheet individually while... 

In this paper, the analytical solution to a new class of nonlinear solitons is presented with cubic nonlinearity, subject to a dissipation term arising as a result of a first-order derivative with respect to time, in the weakly nonlinear regime. Exact solutions are found using the combination of the perturbation and Green's function methods up to the third order. We present an example and discuss the asymptotic behavior of the Green's function. The dissipative solitary equation is also studied in the phase space in the non-dissipative and dissipative forms. Bounded and unbounded solutions of this equation are characterized, yielding an energy conversation law for non-dissipative waves.... 

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit... 

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only... 

One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared  

It has been shown that using multiple antennas in a radar system improves the performance considerably, since multiple target echoes are received from different aspect angles of the target. In this way, the target detection is improved. However, when using multiple antennas, some problems, such as designing the transmit signals, synchronization, etc. emerge that should be solved. One of such problems is the receiver placement. Receiver placement deals with choosing a proper position for the receive antenna in order to optimize the whole system's performance. In this paper, a receiver placement procedure based on improving the radar ambiguity function is proposed for the case of a multisite... 

By employing the MIMO (multiple-input-multiple-output) technology in radar, some new problems emerged, that, in order to benefit the MIMO gains in radar, it was necessary to solve them suitably. One of such obstacles is determining the positions of receive antennas in a MIMO radar system with widely separated antennas (WS MIMO radar), since it is shown that the antennas' positions affect the whole system's performance considerably. In this study, a proper receivers' positioning procedure is proposed. To do this end, four criteria are developed based on the proposed MIMO detector and the MIMO ambiguity function. The simulations verify that the proposed positioning procedure improves the... 

Phenols and alcohols are silylated with hexamethyldisilazane (HMDS) under microwave irradiation in solvent-free condition in good to excellent yields