Sharif Digital Repository

Thermal performance of a novel sintered wick heat pipe was investigated in this study. Two types of sintered wick heat pipes were fabricated and tested at different filling ratios of water, and their thermal resistances in different modes were compared. In the first type, wick was sintered annularly (conventional type), and in the other one (novel type of sintered wick) it was sintered only in one third of cross-section. Results showed that dry-out occurs at higher heat input by an increase in the filling ratio. Moreover, the best filling ratio is 20% for both heat pipes. Thermal resistances of the partly sintered wick heat pipe are approximately 28%, 17% and 47% lower than those of the... 

Heat pipes are important cooling devices that are widely used to transfer high heat loads with low temperature differences. In this paper, thermal performance of a novel type of sintered-wick heat pipe, namely, partly sintered-wick heat pipe, was investigated. The heat pipe was filled with degassed water and acetone, as working uids, and effects of filling ratio, orientation, and heat inputs were tested. Moreover, conditions at which dryout occurred were presented. The results showed that the best filling ratio for both working uids is about 20%. The heat pipe filled with water has better thermal performance than that filled with acetone; thus, the thermal resistances of the 20% water-filled... 

A mathematical model was developed to assess thermomechanical behavior of work rolls during warm rolling processes. A combined finite element analysis-slab method was first developed to determine thermal and mechanical responses of the strip being rolled under steady-state conditions, and then, the calculated roll pressure and temperature field were utilized as the governing boundary conditions for the thermomechanical problem of the work roll. Finally, the thermomechanical stresses within the work rolls were predicted by a thermoelastic finite element approach. The results of the model indicate that, in warm strip rolling, thermal and mechanical stresses developed in the work rolls are... 

Ethylene dichloride thermal cracking is one of the conventional methods for hydrogen chloride production. A critical issue concerned with this method is to provide thermal energy for cracking reaction, which is generally provided by the flammable gasses inside the furnace. Utilizing renewable energy sources can be an interesting topic in this case. Hence, in this paper, the thermal integration feasibility of an ethylene dichloride cracking unit with a hybrid renewable plant, based on geothermal and wind energies, is investigated, while the case study for wind turbines system (Alstom ECO 74/1670/ Class II model) is Meshkin Shahr, located in Iran. To utilize geothermal energy, a... 

At room temperature, ZrOCl2·8H2O on montmorillonite K10 efficiently catalyzes conjugate addition of amines to a variety of conjugated alkenes such as α,β-unsaturated carbonyl compounds, carboxylic esters, nitriles and amides under solvent-free conditions. The catalyst can be recycled for subsequent reactions without any appreciable loss of efficiency. © 2005 Elsevier Ltd. All rights reserved  

Using a model reduction method, a formula for the ideality factor of a pn junction as a function of the diffusion and generation terms of its reverse current is derived. Using this formula a method for separate computation of these two currents for a pn junction is presented. The validity of the method is investigated using computer simulations for an assumed diode with known ideality factor and total leakage current. Experimental results for two commercially available diodes validate the proposed technique  

Phenols were oxidized to quinones using sodium perborate (SPB) on wet montmorillonite as oxidant. The reaction was carried out at ambient temperature on the solid phase under solvent free conditions. ©2005 Sociedade Brasileira de Química  

In this study, a novel type of LHP is innovated, fabricated, and its performance is assessed by numerous experiments. Compared to conventional LHPs, this novel design has some modifications in its evaporator and reservoir configuration. This particular type has a simpler and less costly fabrication procedure compared to other LHPs and it yields acceptable performance. Additionally, a novel method is introduced to control the temperature distribution in the system. A steel ball is placed in the evaporator to actively control the operating temperature. The ball is moved by two magnets installed outside of the evaporator. Moreover, a steady-state one-dimensional mathematical model of the... 

Statistical models for the study of solvent effects on the endo/exo selectivity of Diels-Alder reactions using molecular surface electrostatic potentials was obtained. The models show that hydrogen bond interactions of solvent molecules favor the predominance of the endo isomer for the reaction of methyl acrylate, methyl methacrylate and methyl trans-crotonate with cyclopentadiene whereas the effect of solvophobicity seems to be negligible. © 2003 Published by Elsevier Ltd  

Maximizing the value of resources and producing less waste are strategic decisions affecting sustainability and competitive advantage. Sustainable closed-loop supply chains (CLSCs) are designed to minimize waste by circling back (repairing, reselling, or dismantling for parts) previously discarded products into the value chain. This study presents a novel two-stage fuzzy supplier selection and order allocation model in a CLSC. In Stage 1, we use the fuzzy best-worst method (BWM) to select the most suitable suppliers according to economic, environmental, social, and circular criteria. In Stage 2, we use a multi-objective mixed-integer linear programming (MOMILP) model to design a... 

Maximizing the value of resources and producing less waste are strategic decisions affecting sustainability and competitive advantage. Sustainable closed-loop supply chains (CLSCs) are designed to minimize waste by circling back (repairing, reselling, or dismantling for parts) previously discarded products into the value chain. This study presents a novel two-stage fuzzy supplier selection and order allocation model in a CLSC. In Stage 1, we use the fuzzy best-worst method (BWM) to select the most suitable suppliers according to economic, environmental, social, and circular criteria. In Stage 2, we use a multi-objective mixed-integer linear programming (MOMILP) model to design a... 

An operator-assisted user-provided network (UPN) has the potential to achieve a low cost ubiquitous Internet connectivity, without significantly increasing the network infrastructure investment. In this paper, we consider such a network where the network operator encourages some of her subscribers to operate as mobile Wi-Fi hotspots (hosts), providing Internet connectivity for other subscribers (clients). We formulate the interaction between the operator and mobile users as a two-stage game. In Stage I, the operator determines the usage-based pricing and quota-based incentive mechanism for the data usage. In Stage II, the mobile users make their decisions about whether to be a host, or a... 

(Chemical Equation Presented) New 2-alkyl-5-aryl-(1H)-pyrrole-4-ol derivatives were synthesized via three-component reaction of β-dicarbonyl compounds with arylglyoxals in the presence of ammonium acetate in water at room temperature. © 2008 American Chemical Society  

Mechanical characterization of fractures, i.e., identifying their characteristic parameters such as energy release rate, is crucial to assess the safety and stability of structural members. This is generally achieved using a combination of finite element analysis and optimization. Machine learning models are increasingly used to characterize engineering problems. While such models have shown impressive performance on smooth data, their performance diminishes significantly on data with discontinuities and sharp gradients. For fractures, this issue is more severe due to the singular solutions in the vicinity of the fracture tips. To resolve this difficulty, leveraging classical fracture... 

Purpose: Experiencing stigma after abortion may decelerate the accumulation of human capital. Despite the importance of studying the relationship between religiosity and abortion stigma, the topic is understudied, especially in Islamic contexts. Abortion was legalized in Iran in 2005. Under the new law, far more cases are allowed for abortion. This change provided an opportunity to explore the interplay of abortion stigma, legalization and religiosity in Iran. Design/methodology/approach: Using regression analysis based on 291 completed questionnaires from two cities in Iran, this study analyzes the relation between abortion stigma level and religiosity in Iran, controlling for contextual... 

Based on the mathematical similarity of the Schrödinger and Helmholtz equations, the tight-binding method has been employed for solving optical waveguide problems, in a manner similar to the methods commonly used in solid-state physics. The solutions (TE mode electric field waveforms and propagation constants) of a single dielectric slab waveguide are considered to be known, and tight-binding is used to compute the propagation constants of several multi-waveguide structures. Analytical solutions are derived for linear and circular arrays of adjacent waveguides. The problem of two similar adjacent waveguides is treated in detail for two cases of similar and different propagation constants of... 

Purpose: Experiencing stigma after abortion may decelerate the accumulation of human capital. Despite the importance of studying the relationship between religiosity and abortion stigma, the topic is understudied, especially in Islamic contexts. Abortion was legalized in Iran in 2005. Under the new law, far more cases are allowed for abortion. This change provided an opportunity to explore the interplay of abortion stigma, legalization and religiosity in Iran. Design/methodology/approach: Using regression analysis based on 291 completed questionnaires from two cities in Iran, this study analyzes the relation between abortion stigma level and religiosity in Iran, controlling for contextual... 

In this work, the effects of rolling parameters, cooling media, and deformation path on mechanical properties and aging behavior of hot-rolled AA2017 were studied. First, hot-rolling experiments were conducted under different working conditions, and the rolled strips were then aged at room temperature for up to 57 days during which hardness and tensile tests were carried out to record the changes in the mechanical properties of the alloy. Furthermore, due to the importance of static recrystallization on subsequent aging behavior, the rate of recrystallization was also computed. To this end, a mathematical model was developed to predict thermomechanical responses during hot rolling using the... 

In the context of the care crisis in modern medicine, the existential needs of patients are not sufficiently satisfied. One idea to address the crisis is that physicians should be educated to be virtuous. This suggestion is inadequate because it does not take into account the role of (non-)human factors, including technologies. The paper focuses on online caring forums, arguing that they are technological factors that can play the role of “focal things”, in which the members gather together to do a care-related focal practice. We study empirically the online forums of Ninisite, a popular Persian website on pregnancy, childbirth, and parenting, and suggest that these forums shape focal...