Sharif Digital Repository

In this paper, after reviewing the basic structure for implementing WSN in smart grid, we would give a case study for implementation of such a structure in a smart home. It will be shown that using new generation cellular network structure, gives a basic improvement the infrastructure needed for gathering the information and taking a real time monitoring and control of a simplified model of a smart grid executed as a smart home. We will take the advantage of computer simulations to show the reliability of this method and finally, we will analyze the advantages of using this proposed structure in a smart grid. [1, 4]  

Photodynamic therapy (PDT) is a medical radio chemotherapeutic method that uses light, photosensitizing agents, and oxygen to produce cytotoxic compounds, which eliminate malignant cells. Recently, Microfluidic systems have been used to analyse photosensitizers (PSs) due to their potential to replicate in vivo environments. While prior studies have established a strong correlation between reacted singlet oxygen concentration and PDT-induced cellular death, the effects that the ambient fluid flow might have on the concentration of oxygen and PS have been disregarded in many, which limits the reliability of the results. Herein, we coupled the transport of oxygen and PS throughout the ambient... 

Gorgan Bay (GB) and Miankaleh Peninsula biosphere reserve has faced an endangering condition because of a significant water loss and quality degradation due to intensive eutrophication. However, a synoptic view of the spatiotemporal dynamic of eutrophication is missing. In this study, we first used MODIS data to trace the long-term trend of eutrophication in GB between 2003 and 2021. To investigate the intra-annual variability of Chl-a in GB at a much higher spatial resolution, we developed an Artificial Neural Network (ANN) algorithm that uses Sentinel-2 imagery to map monthly Chl-a in the water year 2020–2021. Finally, we explored the major physical controls on eutrophication in GB.... 

We consider a source model for information theoretic secret key agreement based on the distance among the nodes, in a basic system consisting of two legitimate users and an eavesdropper. The legitimate nodes try to agree on a reliable and secure key based on their noisy observation of distance between them. We propose two methods to enhance system utility: 1) Artificial Noise Forwarding (ANF), 2) transmission in different beam directions (multi-antenna transmission). In the first method artificial noise is used to worsen e a vesdropper's distance estimation and in the second method beacon signals are sent in different directions and the virtual distances in different beam directions are used... 

The main security service in the connected world of cyber physical systems necessitates to authenticate a large number of nodes privately. In this paper, the private authentication problem is considered, that consists of a certificate authority, a verifier, many legitimate users (prover) and any arbitrary number of illegitimate users. Each legitimate user wants to be authenticated (using his personal key) by the verifier, while simultaneously wants to stay completely anonymous (even to the verifier and the CA). On the other hand, an illegitimate user must fail to authenticate himself. We analyze this problem from an information theoretical perspective. First, we propose a general interactive... 

We consider the anonymous mutual authentication problem, which consists of a certificate authority, single or multiple verifiers, many legitimate users (provers) and any arbitrary number of illegitimate users. The legal verifier and a legitimate user must be mutually authenticated to each other using the user's key, while the identity of the user must stay unrevealed. An attacker (illegitimate prover) as well as an illegal verifier must fail in authentication. A general interactive information theoretic framework in a finite field is proposed, where the normalized total key rate as a metric for reliability is defined. Maximizing this rate has a trade-off with establishing anonymity. The... 

It is a common practice in the current literature of electricity markets to use game-theoretic approaches for strategic price bidding. However, they generally rely on the assumption that the strategic bidders have prior knowledge of rival bids, either perfectly or with some uncertainty. This is not necessarily a realistic assumption. This paper takes a different approach by relaxing such an assumption and exploits a no-regret learning algorithm for repeated games. In particular, by using the a posteriori information about rivals’ bids, a learner can implement a no-regret algorithm to optimize her/his decision making. Given this information, we utilize a multiplicative weight-update... 

The die-wall friction is one of the influential mechanical factors in the metal nano-powder compaction process that can noticeably impress the densification behavior of nanoparticles. In this study, the uniaxial cold compaction process of aluminum nano-powders, which are initially loaded into the nickel die-walls, is analyzed using the molecular dynamics (MD) method. The influence of die-wall friction is studied on the nano-powder compaction process. The results illustrate the effect of frictional die-walls on the characteristics of relative density–pressure and stress–strain curves, the pressure distribution of nano-powders, and the final green product. The evolution of the die-wall... 

Accurate system identification (SI) is essential for flight controller design of unmanned aerial vehicles and microaerial vehicles (MAVs). SI can be performed either in frequency or time domain using flight test data. As flight testing is often costly and may even lead to catastrophic events before some flight stability analysis is at hand, a low-cost 5 degree-of-freedom free motion platform (FMP) is designed and used for initial identification of MAVs via wind tunnel testing. A typical MAV is constructed as a test case and equipped with inertial sensors for testing and validation purposes. The proposed FMP allows for both rotational as well as translational motions that in turn provide for... 

In this paper, we address global non-fragile control and synchronization of a new fractional order chaotic system. First we inspect the chaotic behavior of the fractional order system under study and also find the lowest order (2.49) for the introduced dynamics to remain chaotic. Then, a necessary and sufficient condition which can be easily extended to other fractional-order systems is proposed in terms of Linear Matrix Inequality (LMI) to check whether the candidate state feedback controller with parameter uncertainty can guarantee zero convergence of error or not. In addition, the proposed method provides a global zero attraction of error that guarantees stability around all existing... 

A single-degree-of-freedom model is considered for flexible exercise bars based on the lumped-element approach. By considering the side segment of a flexible bar as a cantilever beam with an equivalent mass at the free end, its free-vibration response, as well as the forced response under the excitation of the grip, are expressed parametrically. Experiments are performed on a particular flexible bar (FLEXI-BAR) in order to obtain numerical values for quantifying the model's parameters. The model is also computationally simulated to study the response of the flexible bar to various excitations. The results are imported into a multi-segment musculoskeletal software (AnyBody), where the effect... 

The first step to locate Partial Discharge in power transformers is to find a model that can clearly explain the behavior of the winding in high-frequency. The detailed model is one of the models used for the study of PD. One of the fundamental problems of the described model is to find its parameters. And the accuracy in calculating these parameters has significant impact on reducing the simulation error and PD locating. The current paper seeks to calculate the parameters of the detailed model 20kv distribution transformer winding by using the finite element method (FEM). Comparing the results of this model with pulse waveforms obtained from the PD to the winding in the laboratory... 

While the differentiation factors have been widely used to differentiate mesenchymal stem cells (MSCs) into various cell types, they can cause harm at the same time. Therefore, it is beneficial to propose methods to differentiate MSCs without factors. Herein, magnetoelectric (ME) nanofibers were synthesized as the scaffold for the growth of MSCs and their differentiation into neural cells without factors. This nanocomposite takes the advantage of the synergies of the magnetostrictive filler, CoFe 2 O 4 nanoparticles (CFO), and piezoelectric polymer, polyvinylidene difluoride (PVDF). Graphene oxide nanosheets were decorated with CFO nanoparticles for a proper dispersion in the polymer through... 

We have investigated the piezoelectric response of the hydrogenated graphene oxide (H-G-SiO2) stacks both experimentally and theoretically. The piezoresponse force microscopy method and density-functional theory (DFT) calculations were used to study the piezoresponse effect of this structure from both experimental and computational point of views. A mono-layer graphene, made by chemical vapour deposition method, is deposited on Si/SiO2 substrate and its surface is then functionalized with hydrogen atoms. The vertical piezoresponse, observed by piezoresponse force microscopy, is measured to be about 2146 pC N-1, that is comparable to the reported state of the art piezoelectric materials such...