Sharif Digital Repository

A vapor-compression cooling system utilizing PCM is studied whereby the electricity consumption peak load is shifted. More specifically, the dynamic performance of the cooling system with and without PCM is evaluated and is presented with details on the hottest day of the year in Tehran, Iran. The proposed system uses the cooling energy to freeze or “discharge” the PCM during nighttime when the cooling load is minimally needed and uses the stored cooling energy during the peak load hours by melting or “charging” the PCM. This leads to better performance during the peak load hours when higher cooling loads are required. Oleic acid was chosen as PCM. The simulation was performed in EES... 

High mountains and cold climate in the north-west of Iran are critical factors for the design of optimized District Heating (DH) systems and energy-efficient buildings. It is essential to consider the Life Cycle Cost (LCC) that includes all costs, such as initial investment and operating costs, for designing an optimum DH system. Moreover, considering climate change for accurately predicting the required heating load is also necessary. In this research, a general optimization is carried out for the first time with the aim of a new design concept of a DH system according to a LCC, while considering all-involved parameters. This optimized design is based on various parameters such as ceiling... 

As a versatile platform for integrating renewable energies, District Heating systems (DHSs) offer a pragmatic approach toward an environmentally benign and sustainable future. This paper puts forward the feasibility evaluation of using geothermal hot spring source Heat pumps (HPs) for district heating of a village situated in the north-west of Iran, with a cold mountain climate. Solar collectors are also integrated into the DHS as a supplementary heat source. To this aim, three different renewable-energy-based district heating scenarios, viz. a Ground-Source-HP-based (GSHP), a combined GSHP-flat-plate-solar-collector (GSHP-SFPC), and a combined GSHP-linear-parabolic-solar-collector... 

High mountains and cold climate in the north-west of Iran are critical factors for the design of optimized District Heating (DH) systems and energy-efficient buildings. It is essential to consider the Life Cycle Cost (LCC) that includes all costs, such as initial investment and operating costs, for designing an optimum DH system. Moreover, considering climate change for accurately predicting the required heating load is also necessary. In this research, a general optimization is carried out for the first time with the aim of a new design concept of a DH system according to a LCC, while considering all-involved parameters. This optimized design is based on various parameters such as ceiling... 

The yearly thermo-economic performance is dynamically investigated for three solar heating and cooling systems: solar heating and absorption cooling (SHAC), solar heating and ejector cooling (SHEC), and heating and solar vapor compression cooling (HSVC). First, the effects of important design parameters on the thermo-economic performance of the systems to supply the heating and cooling loads of the building are evaluated. The systems are parametrically analyzed with the weather conditions of Tehran, Iran. The results show that the life cycle costs (LCC) of the SHAC and HSVC systems are alike and much lower than those of the SHEC system. The HSVC system exhibits the best performance from... 

In this research, it is investigated to numerically evaluate the performance of a polymer electrolyte membrane fuel cell (PEMFC). The performance is investigated through the nonuniformity gradient loading at the catalyst layer (CL) of the considered PEMFC. Computational fluid dynamics is used to simulate a 2D domain in which a steady-state laminar compressible flow in two-phase for the PEMFC has been considered. In this case, a particular nonuniform variation inside the CL along the channel is assumed. The nonuniform gradient is created using a nonisothermal domain to predict the flooding effects on the performance of the PEMFC. The computational domain is considered as the cathode of PEMFC,... 

The yearly thermo-economic performance is dynamically investigated for three solar heating and cooling systems: solar heating and absorption cooling (SHAC), solar heating and ejector cooling (SHEC), and heating and solar vapor compression cooling (HSVC). First, the effects of important design parameters on the thermo-economic performance of the systems to supply the heating and cooling loads of the building are evaluated. The systems are parametrically analyzed with the weather conditions of Tehran, Iran. The results show that the life cycle costs (LCC) of the SHAC and HSVC systems are alike and much lower than those of the SHEC system. The HSVC system exhibits the best performance from... 

Random binning is a widely utilized tool in information theory, particularly for proving achievability bounds. In this paper, we investigate the output statistics of random binning (OSRB) for two cases: where the binned sequence is i.i.d. generated, and randomly chosen from an ϵ-typical set using the Tsallis divergence Tα measure for all values of αin(0, infty). For α=infty, due to the unbounded nature of Tinfty, we analyze the OSRB framework using Rényi's divergence criterion with the order of infinity, denoted as Dinfty. While exploring OSRB, we encounter a specific form of Renyi's conditional entropy and delve into its properties. Additionally, we demonstrate the effectiveness of this... 

Learning a foreign language encompasses a process of trial and error that can lead to the progression of the learner's interlanguage, meaning that the learners make use of their language knowledge that receives feedback and brings about progress through diagnosis of the problems and being corrected by the teacher. Therefore, there exists a need to analyze the underlying reasons causing the students to remain taciturn with a low willingness to communicate (WTC) during a language class. There has been much work done investigating the role of the learner's stable personal characteristics (traits) along with their situational changes at a specific time (states) that influence the student's... 

Accurate system identification (SI) is essential for flight controller design of unmanned aerial vehicles and microaerial vehicles (MAVs). SI can be performed either in frequency or time domain using flight test data. As flight testing is often costly and may even lead to catastrophic events before some flight stability analysis is at hand, a low-cost 5 degree-of-freedom free motion platform (FMP) is designed and used for initial identification of MAVs via wind tunnel testing. A typical MAV is constructed as a test case and equipped with inertial sensors for testing and validation purposes. The proposed FMP allows for both rotational as well as translational motions that in turn provide for... 

Using 3-D scanned data to analyze and extract pore network plays a vital role in investigation of porous media's characteristics. In this paper, a new simple method is developed to detect pores and throats for analyzing the connectivity and permeability of the network. This automated method utilizes some of the common and well-known image processing functions which are widely accessible by researchers and this has led to an easy algorithm implementation. In this method, after polishing and quality control of images, using city-block distance function and watershed segmentation algorithm, pores and throats are detected and 3-D network is produced. This method can also be applied on 2-D images... 

In this paper, we try to recognize and distinguish different groups of arrhythmia using novel features which have been obtained from the heart rate's phase space in recent years. For this purpose, we used Triangular Phase Space Mapping (TPSM) and Parabolic Phase Space Mapping (PPSM). For recognition, we used three groups of 15 subjects using the Physionet database (Arrhythmia, Congestive Heart Failure (CHF), and Atrial Fibrillation (AF)) with Normal Sinus Rhythm (NSR). The obtained features discriminate arrhythmia from NSR by p