Sharif Digital Repository

Microstructural characteristics and mechanical properties of a friction stir welded cast aluminum bronze (Cu-9Al-1Fe), produced by a sand casting method, have been investigated at tool rotation of 850-1500 rpm and traverse speed of 50-100 mm/min. Refinement of the primary coarse cast microstructure in the base metal was seen after friction stir welding. Microstructure of the stir zone was characterized in four distinct areas of non-isometric fine grains while a significant grain growth was noticed in some of the areas. Conditions of grain growth are defined with high heat input intensity and low heat transfer capability. The grain size was observed to decrease after FSW, resulting in a... 

Most sulfide oxidizing bioreactors are based on pure cultures or artificial mixes of microorganisms with strict requirements for growth, which make the system unstable and do not guarantee their long term performance. The ultimate goal of this study is to develop a natural mix of chemotrophic bacteria that may be applied anaerobically for the treatment of sour gas. Activated sludge from local municipal wastewater treatment plant that was maintained in endogenous anaerobic conditions for one year was used in this study. Total suspended solids (TSS) and volatile suspended solids (VSS) of the sludge was 22 gl-1 and 14.3 gl-1, respectively. A glass culture vessel had a volume of 0.65 L was used... 

Building envelope is the sole interface with outdoors that can lie in the level of integrating control strategies to enhance occupant’s comfort and building performance. However, in the literature, there is still a lack of multi-purpose control strategies which can balance diverse and antagonistic aspects of occupant comfort while keeping the building energy consumption under control. Therefore, this research proposed an integrated simulation-based workflow using EnergyPlus and Python-based package, OpyPlus, to adjust a roller shade for single occupied office space in a hot and arid climate. The developed system aims to improve both occupant’s visual and thermal comfort considering daylight... 

A systematic change of HZSM-5 (HZ5) as a catalyst of the methanol to aromatics (MTA) reaction was undertaken by employing a fixed-bed tubular-type reactor under ambient pressure, applying a weight hourly space velocity (WHSV) of 2 h-1 at 375 °C, as the first report on the application of low-Si/Al-ratio alkaline-[Mo,Na]-HZSM-5 in the MTA process. To characterize the surface and textural properties of the catalysts, powder X-ray diffraction (PXRD), nitrogen adsorption/desorption, temperature-programmed desorption of ammonia (NH3-TPD), pyridine-infrared spectroscopy (Py-IR), thermogravimetric analysis (TGA), and energy-dispersive X-ray (EDX) methods were employed. Gas chromatography (GC) and... 

An n × n matrix A is said to be silver if, for i = 1,2,...,n, each symbol in {1,2,...,2n - 1} appears either in the ith row or the ith column of A. The 38th International Mathematical Olympiad asked whether a silver matrix exists with n = 1997. More generally, a silver cube is a triple (K n d , I, c) where I is a maximum independent set in a Cartesian power of the complete graph K n , and c : V(K n d)→ {1,2,...,d(n-1)+1} is a vertex colouring where, for ν ∈ I, the closed neighbourhood N[ν] sees every colour. Silver cubes are related to codes, dominating sets, and those with n a prime power are also related to finite geometry. We present here algebraic constructions, small examples, and a... 

The main problem with airway segmentation methods which significantly influences their accuracy is leakage into the extra-luminal regions due to thinness of the airway wall during the process of segmentation. This phenomenon potentially makes large regions of lungparenchyma to be wrongly identified as airways. A solution to this problem in the previous methods was based on leak detection followed by reducing leakage during the segmentation process. This has been dealt with adjusting the segmentation parameters and performing the re-segmentation process on the pre-segmented area. This makes the algorithm very exhaustive and more dependent on the user interaction. The method presented here is... 

Kinetic hydrate inhibitor laboratory testing before field application is one of the key priorities in the oil and gas industry. The common induction-time-based technique is often used to evaluate and screen for kinetic hydrate inhibitors (KHIs). However, the main challenge relates to the stochastic nature of hydrate nucleation observed in fresh systems, which often results in scattered data on hydrate formation with unacceptable uncertainties. A much more precise KHI evaluation method, called crystal growth inhibition (CGI), provides comprehensive insights into the inhibitory behavior of a kinetic hydrate inhibitor, including both hydrate formation and decomposition. Given that industry does... 

Two new macrocyclic ligands containing 17- and 19-membered O2N3-donor aza-crowns anchored to [60]Fullerene were synthesized and characterized by employing HPLC, electrospray ionization mass (ESI-MS), 1H and 13C NMR, UV–vis, IR spectroscopies, as well as powder X-ray diffraction (PXRD) and thermogravimetric analysis (TGA) in solid state. TGA measurements revealed that upon linking each of these macrocycle rings to [60]Fullerene, the decomposition point measured for [60]Fullerene moiety was increased, indicating on the promoted stability of [60]Fullerene backbone during binding to these macrocyclic ligands. Moreover, the ground state non-covalent interactions of [60]Fullerene derivatives of... 

An example of zeolite selectivity (MFI → MOR) driven by synthesis aging time has been studied. Using N,N,N′,N′-tetramethyl-N,N′-dipropyl-ethylenediammonium diiodide (TMDP) as an organic structure-directing agent (OSDA), the zeolite phases obtained at 2 h (MFI 97%), 8 h (MFI 84%, MOR 16%) and 24 h (MFI 43%, MOR 57%) have been characterized by powder X-ray diffraction. The results suggest that at intermediate aging time, namely 8 h and 24 h, the dominant phase (MFI) is displaced by MOR. Different techniques (FT-IR, Raman, 13C MAS NMR, TGA/DTG and HC microanalysis) have been employed to verify the OSDA integrity and occlusion inside the zeolite micropores as well as to quantify the water and... 

Detection of rolling bearing faults by vibration analysis is an important part of condition monitoring programs. In this paper a new method for detection of bearing defects based on a new concept of local surface roughness, is proposed. When a defect in the bearing grows then roughness of the defective surface increases and measurement of the roughness can be a good indicator of the bearing defect. In this paper a method of indirectly measuring surface roughness by using vibration signal is introduced. Several attached examples including both numerically simulated signals and actual experimental data show the effectiveness of the new, easy-to-implement method  

In this study, the energy method has been used to develop a finite-element code for studying the effects of loose rotating discs on the rotor-bearing systems' response. A mathematical model of the loose disc has resulted in terms similar to unbalance and gyroscopic effects in the equation of motion of the system. Results of this study show that rotor response and beating phenomena are a function of measurement location, loose disc mass and inertia, ratio of rotating speed to the speed of loose disc, and clearance between the loose disc and shaft considering constant speed for loose disc and shaft. The developed finite-element model can numerically give the response of rotors with any number... 

During backward rub in a turbomachine, rotor is compelled by frictional forces into a severe precessional sliding motion inside stationary parts such as seals or journal bearings in opposite direction of rotor's rotation. Backward rub occurs with high frequency and high amplitude of vibration and can deteriorates rubbing surfaces just for few moments. This paper presents and investigates the idea of clearance profile alteration from annular form to non-annular 3-lobed form in order to affect the reverse rub's characteristics. For this purpose, a test setup consisting of a lightly damped rotor-stator system is designed and built in SUT's condition-monitoring laboratory for testing the... 

Today, turbomachinery designers are trying to attain zero clearances for optimizing performance and efficiency of machine by designing advanced compliant-segmented seals. This trend involves secondary issues such as rotor-to-stator contact interaction which is to be treated with more technical knowledge in rotordynamic design and condition monitoring programs. The aim of this paper is to gain insight into dynamic interaction between a flexible rotor and a set of compliant arc-shaped segments as stator system. Specifically, the unbalanced-induced forward rubbing response is investigated in tight clearance condition during resonance-passing situations. A Jeffcott rotor modeling is used for... 

This paper presents the experimental results of an investigation on the response and efficiency of floating pontoon type breakwaters. Random waves modeled by the Pierson Moskowits wave spectrum are used for various configurations of floating breakwaters. The experimental results are presented in graphs for the transmission coefficient as a function of incident wave length and height for breakwaters used in this study. The obtained results for the breakwaters of this study show that by increasing the wave period and length, the transmission coefficient increases, while increase in the mass and draft of the floating breakwater causes the transmission coefficient to reduce. © Shiraz University