Sharif Digital Repository

In this paper, we analyze the performance of a nonlinear two-photon-absorption (TPA) receiver and compare its performance with that of a single-photon-absorption (SPA) receiver in the context of spectral-phase-encoded optical code-division multiple access (CDMA) technique. The performances for the above systems are evaluated for two different transmission scenarios, namely, asynchronous and slot-level synchronous transmitters. Performance evaluation includes different sources of degradation such as multiple-access interference, noise due to optical amplification, shot noise, and thermal noise. In obtaining the performance, the mean and variance of the received signal in each of the above... 

In this paper, the authors study the performance of a two-photon absorption (TPA) receiver in a typical communication system employing an optical amplifier. For the study, the authors develop a comprehensive performance analysis, taking into account noises due to an optical amplifier, shot noise, and thermal noise, using Gaussian approximation technique. In evaluating the performance of the system using this technique, the mean and the variance of the received signal will be derived. Comparing the results of receivers using the TPA process with that of a typical single-photon absorption (SPA) structure leads the authors to conclude that TPA receivers can be used when the speed of the... 

This paper describes a study of the performance of various configurations for placing multiple optical amplifiers in a typical coherent ultrashort light pulse code-division multiple access (CULP-CDMA) communication system using the additive noise model. For this study, a comprehensive performance analysis was developed that takes into account multiple-access noise, noise due to optical amplifiers, and thermal noise using the saddle-point approximation technique. Prior to obtaining the overall system performance, the input/output statistical models for different elements of the system such as encoders/decoders, star coupler, and optical amplifiers were obtained. Performance comparisons... 

In this paper, we analyze the performance of a nonlinear two-photon-absorption (TPA) receiver and compare its performance with that of a single-photon-absorption (SPA) receiver in the context of spectral-phase-encoded optical code-division multiple access (CDMA) technique. The performances for the above systems are evaluated for two different transmission scenarios, namely, asynchronous and slot-level synchronous transmitters. Performance evaluation includes different sources of degradation such as multiple-access interference, noise due to optical amplification, shot noise, and thermal noise. In obtaining the performance, the mean and variance of the received signal in each of the above... 

In this paper, the authors study the performance of a two-photon absorption (TPA) receiver in a typical communication system employing an optical amplifier. For the study, the authors develop a comprehensive performance analysis, taking into account noises due to an optical amplifier, shot noise, and thermal noise, using Gaussian approximation technique. In evaluating the performance of the system using this technique, the mean and the variance of the received signal will be derived. Comparing the results of receivers using the TPA process with that of a typical single-photon absorption (SPA) structure leads the authors to conclude that TPA receivers can be used when the speed of the... 

This paper describes a study of the performance of various configurations for placing multiple optical amplifiers in a typical coherent ultrashort light pulse code-division multiple access (CULP-CDMA) communication system using the additive noise model. For this study, a comprehensive performance analysis was developed that takes into account multiple-access noise, noise due to optical amplifiers, and thermal noise using the saddle-point approximation technique. Prior to obtaining the overall system performance, the input/ output statistical models for different elements of the system such as encoders/decoders, star coupler, and optical amplifiers were obtained. Performance comparisons... 

In the new environment of power system, generating units dispatch problem plays an important role inasmuch as it is used to clear power market transactions. That is, market operator solves an optimization problem in order to find the energy and capacity reserve quota of each generating units participating in the power market. There are different techniques for solving this problem which differ in many aspects, including the objective function, optimization algorithm, and feasibility, so using an efficient technique is vital. In the real competitive electricity market, the components of generating units dispatch problem are faced with the uncertainties; therefore, due to the presence of... 

A method for two dimensional position finding of stationary targets whose bearing measurements suffers from indeterminable bias and random noise has been proposed. The algorithm uses convex optimization to minimize an error function which has been calculated based on circular as well as linear loci of error. Taking into account a number of observations, certain modifications have been applied to the initial crude method so as to arrive at a faster, more accurate method. Simulation results of the method illustrate up to 30% increase in accuracy compared with the well-known least square filter  

Transient liquid phase bonding of AISI 304 austenitic stainless steel was carried out using a Co-based interlayer with 40 μm thickness. The effect of bonding time and solid-state homogenisation time on the microstructure and mechanical properties of samples was investigated. The results showed that isothermal solidification was completed within 30 min at a constant temperature of 1180°C. With increasing homogenisation time, at 1000°C, a more uniform distribution of alloying elements and hardness profile across the joint region was achieved. The average shear strength of homogenised samples was about 72% that of the base metal at the same heat treatment cycle. © 2017 Institute of Materials,... 

This paper presents the design and the application of a new self-powered hybrid electromagnetic damper that can harvest energy while mitigating the vibration of a structure. The damper is able to switch between an energy harvesting passive mode and a semi-active mode depending on the amount of energy harvested and stored in the battery. The energy harvested in the passive mode resulting from the suppression of vibration is employed to power up the monitoring and electronic components necessary for the semi-active control. This provides a hybrid control capability that is autonomous in terms of its power requirement. The proposed hybrid circuit design provides two possible options for the... 

In this article, transient two-dimensional mixed convection of nanofluids in the entrance region of a vertical channel has been studied carefully. The geometry under consideration consisted of a parallel-plate channel partly filled with a porous medium with a constant wall temperature. In the free flow region, the two-dimensional flow field has been governed by the Navier-Stokes equations. The general formulation of the momentum equations accounting for the inertial and the viscous effects in the presence of a porous medium has been used. Viscous dissipation effects have also been incorporated in the thermal energy equation. Effects of Brownian diffusion and thermophoresis have also been... 

Binding of Mg 2+, Ca 2+, Zn 2+, and Cu + metal ions with 2′-deoxythymidine (dT) nucleoside was studied using a density functional theory method and a 6-311++G(d,p) basis set. This work demonstrated that the interaction of dT with these cations is tri-coordinated · (O2, O4′, O5′). Among the four types of cations, Zn 2+ cation exhibited the most tendency to interact with the dT. Cations via their interaction with dT can affect the N-glycosidic bond length, the values of pseudorotation of the sugar ring, the orientation of the base unit with respect to the sugar ring, and the acidity of the O5′H, O3′H, and N3H groups in the dT nucleoside. Natural bond orbital analysis was performed to calculate... 

Interactions of α-D-glucose with gold, silver, and copper metal clusters are studied theoretically at the density functional theory (CAM-B3LYP) and MP2 levels of theory, using trimer clusters as simple catalytic models for metal particles as well as investigating the effect of cluster charge by studying the interactions of cationic and anionic gold clusters with glucose. The bonding between α-D-glucose and metal clusters occurs by two major bonding factors; the anchoring of M atoms (M = Cu, Ag, and Au) to the O atoms, and the unconventional M.H-O hydrogen bond. Depending on the charge of metal clusters, each of these bonds contributes significantly to the complexation. Binding energy... 

In this paper, the characteristics of a hybrid regenerative electromagnetic (EM) damper are first determined and experimentally examined. The main idea is to have two modes of operation for the EM damper, namely passive energy harvesting and semi-active modes. In the passive mode, the vibrational energy of an underlying structure is harvested and stored in a rechargeable battery. The harvested energy can then be employed in the semi-active control mode to supply the power demand for the required sensors and microcontroller. This hybrid damper would thus be capable of realizing the characteristics of a self-powered EM damper. A prototype of the damper was designed and tested under different... 

This paper considers a cooperative space-frequency (SF) coded OFDM system and evaluates its performance over quasi-static frequency selective Rayleigh fading channels. An expression for exact outage error probability is derived and its tight closed form lower bound is presented. The tightness of the lower bound is demonstrated through the Monte Carlo simulations. The asymptotic analysis indicates that the proposed protocol achieves full spatial and frequency diversities available in the cooperative communication system. The theoretical analysis of the proposed space-frequency coded cooperation protocol is further confirmed by computer simulations. © 2007 IEEE  

Rcent measurements suggest the possibility of sharing spectrum among different parties subject to interference-protection constraints. In order to enable access to an unused licensed spectrum, a secondary user has to monitor licensed bands and opportunistically transmit whenever no primary signal is detected. In this paper, we study spectrum-sharing between a primary licensee and a group of secondary users. The structure of an asymptotically optimum detector based on the measurements of all secondary users is derived and the effect of the quantization error in such a system is evaluated. The results show the superiority of the proposed detector to other schemes. © 2007 IEEE  

We have studied the cosmic microwave background (CMB) map looking for features beyond cosmological isotropy. We began by tiling the CMB variance maps (which are produced by different smoothing scales) with stripes of different sizes along the most prominent dipole direction. We were able to confirm previous findings regarding the significance of the dipole. Furthermore, we discovered that some of the higher multipoles exhibit significance comparable to the dipole that naturally depends on the smoothing scales. In the end, we discussed this result having an eye on the look-elsewhere-effect. We believe our results may indicate an anomalous patch in the CMB sky that warrants further... 

The aim of this investigation is to study the effect of geometric tool parameters on mechanical and microstructural behaviours during dissimilar friction stir welding of 5 mm thick plates of AA 5086- O and AA 6061-T6. Three tool geometries were used, including a tool with a concave shoulder and a conical probe with three grooves, flat shoulder and threadless cylindrical probe, and a tool with a flat shoulder and a threaded cylindrical probe. It was found that the tool with a concave shoulder and a conical probe with three grooves produces higher heat input and temperatures that provides more homogeneous stir zones than the other tools. In addition, the grain sizes of the stir zone in the AA... 

The relative stabilities and noncovalent interactions of the six low-lying energy tautomers of cytosine nucleobase with some biological anions (such as F-, Cl-, and CN-) have been investigated in gas phase by density functional theory (DFT) method in conjunction with 6-311++G (d,p) atomic basis set. Furthermore, to systematically investigate all possible tautomerisms from cytosine induced by proton transfer, we describe a study of structural tautomer interconversion in the gas phase and in a continuum solvent using DFT calculation. We carried out geometrical optimizations with the integral equation formalism of polarizable continuum (IEF-PCM) model to account for the solvent effect, and the... 

In this work, temperature field and weld pool geometry during gas tungsten arc welding of 304 stainless steel are predicted by solving the governing equations of heat transfer and fluid flow under quasi-steady state conditions. The model is based on numerical solution of the equations of conservation of mass, momentum, and energy in the weld pool. Weld pool geometry, weld thermal cycles, and various solidification parameters are then calculated by means of the model predictions. The model considers the effects of various process parameters including welding speed and heat input. It is found that the weld pool geometry, predicted by the proposed model, is in reasonable agreement with the...