Sharif Digital Repository

This paper presents the results obtained and the deductions made from a series of microstructural studies and mechanical tests involving gray cast iron which was sand cast using a variety of modules. The effect of cooling rate on the primary dendrite arm spacing (DAS), secondary dendrite arm spacing (SDAS), thickness of ferrite-cementite layer (λe) and the hardness (HB) were evaluated. Results show that the both DAS and SDAS and also λe are highly dependent on the cooling rate, and they decreases as the cooling rate increases. More attempts were also done to correlate the HB with DAS, SDAS and λe. It was found that HB increases as DAS, SDAS and λe decreases  

In this research, a single-component multi-colorimetric sensor array was developed to simultaneously detect homovanillic acid (HVA) and vanillylmandelic acid (VMA) tumor markers based on their oxidation ability in exposure to silver ions. To this aim, gold nanorods (AuNRs) were used as optical signal transducers. The aspect ratio alterations of AuNRs in response to the concentration of the analytes were achieved by silver shell metallization on the surface of AuNRs. Under optimal conditions, absorbance spectra of the probe and associated vivid color variations were recorded, followed by analysis using a hybrid machine learning classification algorithm to discriminate between HVA, VMA, HVA:... 

In this paper, the performance of a novel HDH solar desalination system equipped with a combination of heat pipe (HP), evacuated tube collector (ETC) and air bubble column humidifier is experimentally investigated. This novel HDH system uses advantages of ETC-HP as a highly efficient thermal absorption and conductor device, and at the same time employs the advantages of an air bubble column humidifier, i.e. high interface area and effective mixing in order to heat the water and humidify the air, respectively. The effects of various parameters including incoming air flow rate into the humidifier, initial depth of water in the humidifier, and adding fluids such as oil and water in the space... 

Catecholamine neurotransmitters (CNs), such as dopamine (DA), epinephrine (EP), norepinephrine (NEP), and levodopa (LD), are recognized as the primary biomarkers of a variety of neurological illnesses. Therefore, simultaneous monitoring of these biomarkers is highly recommended for clinical diagnosis and treatment. In this study, a high-performance colorimetric artificial tongue has been proposed for the multiplex detection of CNs. Different aggregation behaviors of gold nanoparticles in the presence of CNs under various buffering conditions generate unique fingerprint response patterns. Under various buffering conditions, the distinct acidity constants of CNs, and consequently their... 

Image fusion means to integrate information from one image to another image. Medical images according to the nature of the images are divided into structural (such as CT and MRI) and functional (such as SPECT, PET). This article fused MRI and PET images and the purpose is adding structural information from MRI to functional information of PET images. The images decomposed with Nonsubsampled Contourlet Transform and then two images were fused with applying fusion rules. The coefficients of the low frequency band are combined by a maximal energy rule and coefficients of the high frequency bands are combined by a maximal variance rule. Finally, visual and quantitative criteria were used to... 

Echocardiography as a common place device has been widely used for diagnosis. Segmentation of left ventricle just using the standard level set formulation based on the magnitude of intensity cannot restrict the contour evolution completely due to the lack of sharp edges. This paper aims to introduce a robust method for segmentation of three-dimensional echocardiography images based on two boundary maps namely distance map and probabilistic map as stopping criteria of contour evolution which are extracted using two different approaches. The distance map is extracted by applying Free Form Deformation (FFD) method on manually determined landmarks of initial spherical volume to register the... 

In this paper, an efficient approach for ultrasonic object segmentation with special application for left ventricle segmentation in echocardiography images is proposed. At first, an efficient hybrid trend for ultrasonic image edge detection is suggested. Then, a modified level set approach is introduced based on the extracted edges and the computed probabilistic map as the stopping criteria for the contour evolution. Both synthetic and clinical images are utilized as validation measures with respect to the prior techniques which indicate outperform results quantitatively and qualitatively. Left ventricle segmentation using proposed method illustrates expert-approved performance, providing a... 

The substitution of conventional mathematical models with fast and accurate modeling tools can result in the further development of desalination technologies and tackling the need for freshwater. Due to the great capability of data-driven methods in analyzing complex systems, several attempts have been made to study various desalination systems using data-driven approaches. In this state-of-the-art review, the application of various artificial intelligence and design of experiment data-driven methods for analyzing different desalination technologies have been thoroughly investigated. According to the applications of data-driven methods in the field of desalination, the reviewed... 

The application of the multi-component Fe-based filler metals (FMs) for transient liquid phase (TLP) bonding of AISI 304 austenitic stainless steel has been overshadowed by dissimilar interlayers merely due to their shorter isothermal solidification time. However, the latter usually suffers from low efficiency in terms of mechanical properties even after homogenization of heat treatment. This study shows that by imposing a temperature gradient across the bond line during the TLP bonding process (TG-TLP), it is possible to reduce the isothermal solidification time significantly. This renews the interest in utilizing multi-component Fe-based FMs. In this regard, the TG-TLP bonding process was... 

Automatic extraction of the varying regions of magnetic resonance images is required as a prior step in a diagnostic intelligent system. The sparsest representation and high-dimensional feature are provided based on learned dictionary. The classification is done by employing the technique that computes the reconstruction error locally and non-locally of each pixel. The acquired results from the real and simulated images are superior to the best MRI segmentation method with regard to the stability advantages. In addition, it is segmented exactly through a formula taken from the distance and sparse factors. Also, it is done automatically taking sparse factor in unsupervised clustering methods... 

Sparse representation is a powerful tool for image processing, including noise removal. It is an effective method for Gaussian noise removal by taking advantage of a fixed and learned dictionary. In this study, the variable distribution of Rician noise is reduced in magnetic resonance (MR) images by sparse representation based on reconstruction error sets. Standard deviation of Gaussian noise is used to find these errors locally. The proposed method represents two formulas for local error calculation using standard deviation of noise. The acquired results from the real and simulated images are comparable, and in some cases, better than the best Rician noise removal method due to the... 

A novel combined power and refrigeration cycle is introduced and analyzed from the thermodynamic standpoint. The proposed cycle is an integration of a Kalina cycle equipped with an ejector (EKalina) and an ejector refrigeration cycle (ERC). In order to enhance the overall cycle performance, the possibility of employing two-phase ejectors in combined power and refrigeration cycles is studied. A parametric analysis is conducted to investigate the effects of the key thermodynamic parameters namely turbine inlet pressure, split ratio, basic ammonia concentration, heat source and evaporator temperatures on the cycle performance. The developed model is also verified with available data and it is... 

We use the correspondence between scalar field theory on AdS and induced conformal field theory on its boundary to calculate correlation functions of logarithmic conformal field theory in arbitrary dimensions. Our calculations utilize the newly proposed method of nilpotent weights. We derive expressions for the four point function assuming a generic interaction term. © 2002 Elsevier Science B.V. All rights reserved